ORiNG IES-3080 Series User manual

Industrial
Management Ethernet Switch
IES-3080 / IES-3062 SERIES
User’s Manual
Version 3.1
Aug, 2019
ORing Industrial Networking Corp.
3F., NO.542-2, Jhongjheng Rd., Sindian
District, New Taipei City 231, Taiwan, R.O.C.
Tel: + 886 2 2218 1066
Fax: + 886 2 2218 1014
Website: www.oring-networking.com
E-mail: [e-mail]

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
1
Table of Content
Getting to Know Your Switch........................................................................4
1.1 About the IES-3080 / IES-3062 SERIES Managed Industrial Switch.........................5
1.2 Software Features ..............................................................................................................5
1.3 Hardware Features.............................................................................................................0
Hardware Installation.....................................................................................0
2.1 Installing Switch on DIN-Rail.............................................................................................0
2.1.1 Mount IES-3080 / IES-3062 SERIES on DIN-Rail..........................................................0
2.2 Wall Mounting Installation..................................................................................................1
Hardware Overview........................................................................................0
3.1 Front Panel..........................................................................................................................0
3.2 Front Panel LEDs ...............................................................................................................3
3.3 Top view Panel....................................................................................................................4
Cables.............................................................................................................5
4.1 Ethernet Cables ..................................................................................................................5
4.1.1 10/100/100BASE-TX/10BASE-T Pin Assignments.........................................................5
4.2 Console Cable.....................................................................................................................6
WEB Management..........................................................................................7
5.1 Configuration by Web Browser.........................................................................................7
5.1.1 About Web-based Management........................................................................................7
5.1.2 System Information ..........................................................................................................9
5.1.3 Front Panel........................................................................................................................9
5.1.4 Basic setting....................................................................................................................10
5.1.4.1 Switch Setting .......................................................................................................10
5.1.4.2 Admin Password ...................................................................................................10
5.1.4.3 IP Setting...............................................................................................................11
5.1.4.4 Time Setting..........................................................................................................12
5.1.4.5 LLDP.....................................................................................................................16
5.1.4.6 Modbus TCP .........................................................................................................16
5.1.4.7 Auto Provision ......................................................................................................17
5.1.4.8 Backup & Restore .................................................................................................17

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
2
5.1.4.9 Upgrade Firmware ................................................................................................19
5.1.1 Redundancy ....................................................................................................................19
5.1.1.1 O-Ring...................................................................................................................19
5.1.1.2 O-Chain.................................................................................................................20
5.1.1.3 RSTP – Repeater...................................................................................................21
5.1.1.4 Fast Recovery........................................................................................................22
5.1.1.5 RSTP.....................................................................................................................23
5.1.1.6 MSTP....................................................................................................................25
5.1.2 Multicast.........................................................................................................................30
5.1.2.1 IGMP Snooping.....................................................................................................30
5.1.2.2 MVR .....................................................................................................................31
5.1.2.3 Static Multicast Filtering.......................................................................................32
5.1.3 Port Setting.....................................................................................................................33
5.1.3.1 Port Control...........................................................................................................33
5.1.3.2 Port Status .............................................................................................................34
5.1.3.3 Port Alias...............................................................................................................35
5.1.3.4 Rate Limit .............................................................................................................35
5.1.3.5 Port Trunk .............................................................................................................36
5.1.3.6 Loop Guard...........................................................................................................37
5.1.4 VLAN.............................................................................................................................37
5.1.4.1 VLAN Setting - IEEE 802.1Q...............................................................................38
5.1.4.2 VLAN Setting – Port Based..................................................................................39
5.1.5 Traffic Priorilization .......................................................................................................41
5.1.5.1 Qos policy.............................................................................................................41
5.1.5.2 Port-base priority...................................................................................................42
5.1.5.3 COS/802.1p...........................................................................................................42
5.1.5.4 TOS/DSCP............................................................................................................43
5.1.6 DHCP Server ..................................................................................................................44
5.1.6.1 DHCP Server – Setting..........................................................................................44
5.1.6.2 DHCP Server – Client List....................................................................................45
5.1.6.3 DHCP Server – Port and IP bindings ....................................................................45
5.1.6.4 DHCP Server –DHCP Relay Agent.......................................................................45
5.1.7 SNMP .............................................................................................................................47
5.1.7.1 SNMP – Agent Setting ..........................................................................................47
5.1.7.2 SNMP –Trap Setting .............................................................................................48
5.1.7.3 SNMPV3...............................................................................................................49
5.1.8 Security...........................................................................................................................51

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
3
5.1.8.1 Management Security............................................................................................51
5.1.8.2 Static MAC Forwarding........................................................................................51
5.1.8.3 MAC Blacklist ......................................................................................................52
5.1.8.4 802.1x....................................................................................................................53
5.1.8.5 IP Guard ................................................................................................................55
5.1.9 Warning ..........................................................................................................................58
5.1.10 Monitor and Diag.......................................................................................................62
5.1.10.1 System Event Log.................................................................................................62
5.1.10.2 MAC Address Table..............................................................................................62
5.1.10.3 Port Overview .......................................................................................................63
5.1.10.4 Port Counters.........................................................................................................64
5.1.10.5 Port Monitoring.....................................................................................................67
5.1.10.6 Traffic Monitor......................................................................................................67
5.1.10.7 Ping .......................................................................................................................68
5.1.11 Save Configuration ....................................................................................................69
5.1.12 Factory Default ..........................................................................................................69
5.1.13 System Reboot...........................................................................................................70
Command Line Interface Management ......................................................71
6.1 About CLI Management.................................................................................................71
6.2 Commands Set List—System Commands Set................................................................76
6.3 Commands Set List—Port Commands Set.....................................................................78
6.4 Commands Set List—Trunk command set .....................................................................81
6.5 Commands Set List—VLAN command set....................................................................82
6.6 Commands Set List—Spanning Tree command set........................................................83
6.7 Commands Set List—QoS command set........................................................................86
6.8 Commands Set List—IGMP command set.....................................................................86
6.9 Commands Set List—MAC/Filter Table command set ..................................................87
6.10 Commands Set List—SNMP command set....................................................................88
6.11 Commands Set List—Port Mirroring command set .......................................................89
6.12 Commands Set List—802.1x command set....................................................................89
6.13 Commands Set List—TFTP command set......................................................................92
6.14 Commands Set List—SYSLOG, SMTP, EVENT command set.....................................92
6.15 Commands Set List—SNTP command set .....................................................................94
6.16 Commands Set List—O-Ring command set...................................................................95
Technical Specifications .............................................................................96

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
4
Getting to Know Your Switch

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
5
1.1 About the IES-3080 / IES-3062 SERIES
Managed Industrial Switch
The IES-3080 / IES-3062 SERIES are powerful managed industrial switches with many
features. These switches can work under wide temperature, dusty environment and humid
condition.
The IES-3080 / IES-3062 SERIES can be managed by WEB, TELNET, Consol or other
third-party SNMP software as well. Besides, these switches can be managed by a useful
utility that we called Open-Vision. Open-Vision is powerful network management software.
With its friendly and powerful interface, you can easily configure multiple switches at the same
time, and monitor switches’ status.
1.2 Software Features
World’s fastest Redundant Ethernet Ring : O-Ring (Recovery time < 10ms over 250 units
connection)
Supports Ring Coupling, Dual Homing over O-Ring technology
Supports SNMPv1/v2/v3 & RMON & Port base/802.1Q VLAN Network Management
Event notification by Email, SNMP trap and Relay Output
Web-based ,Telnet, Console (CLI) configuration
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
RSTP (802.1w)
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with double tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, mirroring, security
Remote Monitoring (RMON)

1.3 Hardware Features
Redundant two DC power inputs
Wide Operating Temperature: -40 to 70oC
Storage Temperature: -40 to 85oC
Operating Humidity: 5% to 95%, non-condensing
Casing: IP-30
10/100Base-T(X) Ethernet port
Console Port
Dimensions(W x D x H) : 52 mm(W)x 106 mm( D )x 144 mm(H)

Hardware Installation
2.1 Installing Switch on DIN-Rail
Each switch has a DIN-Rail kit on rear panel. The DIN-Rail kit helps switch to fix on the
DIN-Rail. It is easy to install the switch on the DIN-Rail:
2.1.1 Mount IES-3080 / IES-3062 SERIES on DIN-Rail
DIN-Rail Size

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
1
2.2 Wall Mounting Installation
Each switch has another installation method for users to fix the switch. A wall mount panel
can be found in the package. The following steps show how to mount the switch on the
wall:
Wall-Mounting size

Hardware Overview
3.1 Front Panel
The following table describes the labels that stick on the IES-3000 series.
Port Description
10/100 RJ-45 fast
Ethernet ports
6/8 10/100Base-T(X) RJ-45 fast Ethernet ports support
auto-negotiation.
Default Setting :
Speed: auto
Duplex: auto
Flow control : disable
Gigabit RJ-45 port 2 10/100/1000Base-T(X) Gigabit ports for IES-3062GT
Fiber port 2 1000Base-X for IES-3062GF Series
2 100Base-FX for IES-3062FX Series
Console Use RS-232 to RJ-45 connecter to manage switch.
Reset Push reset button 2 to 3 seconds to reset the switch.
Push reset button 5 seconds to reset the switch into Factory
Default.

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
1
IES-3062FX & IES-3062GFX
1. LED for PWR1. When the PWR1 links, the green led will be light on.
2. LED for PWR2. When the PWR2 links, the green led will be light on.
3. LED for PWR3. When the PWR3 links, the green led will be light on.
4. LED for R.M (Ring master). When the LED light on, it means that the switch is the ring
master of O-Ring.
5. LED for Ring. When the led light on, it means the O-Ring is activated.
6. LED for Fault Relay. When the fault occurs, the amber LED will be light on.
7. Console port (RJ-45).
8. Reset button. Push the button 3 seconds for reset; 5 seconds for factory default.
9. 10/100Base-T(X) Ethernet ports..
10. LED for Ethernet ports Collision/Duplex status.
11. LED for Ethernet ports Link/Act status.
12. 100Base-FX / 1000Base-X Fiber port.
13. LED for fiber port Link/Act status.

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
2
IES-3062GT / 3080
1. LED for PWR1. When the PWR1 links, the green led will be light on.
2. LED for PWR2. When the PWR2 links, the green led will be light on.
3. LED for PWR3. When the PWR3 links, the green led will be light on.
4. LED for R.M (Ring master). When the LED light on, it means that the switch is the ring
master of O-Ring.
5. LED for Ring. When the led light on, it means the O-Ring is activated.
6. LED for Fault Relay. When the fault occurs, the amber LED will be light on.
7. Console port (RJ-45).
8. Reset button. Push the button 3 seconds for reset; 5 seconds for factory default.
9. 10/100Base-T(X) Ethernet ports..
10. LED for Ethernet ports Collision/Duplex status.
11. LED for Ethernet ports Link/Act status.
12. 1000Base-T Ethernet port.(IES-3062GT) 10/100Base-T(X) Ethernet ports.(IES-3080)
13. LED for Ethernet port Link/Act status.

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
3
3.2 Front Panel LEDs
LED Color Status Description
PW1 Green On DC power module 1 activated.
PW2 Green On DC power module 2 activated.
PW3 Green On Power jack activated.
R.M Green On O-Ring Master.
Ring Green
On O-Ring enabled.
Slowly blinking O-Ring topology has problem
Fast blinking O-Ring work normally.
Fault Amber On Fault relay. Power failure or
Port down/fail.
10/100Base-T(X) Fast Ethernet ports
LNK / ACT Green On Port link up.
Blinking Data transmitted.
Full Duplex Amber On Port works under full duplex.
Gigabit Ethernet ports
ACT Green On Port link up.
Blinking Data transmitted.
LNK Amber On Port link up.
Fiber ports
ACT Green On Port link up.
Blinking Data transmitted.
LNK Amber On Port link up.

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
4
3.3 Top view Panel
The bottom panel components of IES-3080 / IES-3062 SERIES are shown as below:
1. Terminal block includes: PWR1, PWR2 (12-48V DC) and Relay output (1A@24VDC).
2. Power jack for PWR3 (12-45VDC).
.

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
5
Cables
4.1 Ethernet Cables
The IES-3080 / IES-3062 SERIES switches have standard Ethernet ports. According to
the link type, the switches use CAT 3, 4, 5,5e UTP cables to connect to any other network
device (PCs, servers, switches, routers, or hubs). Please refer to the following table for cable
specifications.
Cable Types and Specifications
Cable Type Max. Length Connector
10BASE-T Cat.3, 4, 5 100-ohm UTP 100 m (328 ft) RJ-45
100BASE-TX Cat.5 100-ohm UTP UTP 100 m (328 ft) RJ-45
4.1.1 10/100/100BASE-TX/10BASE-T Pin Assignments
With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for transmitting data, and
pins 3 and 6 are used for receiving data.
RJ-45 Pin Assignments
Pin Number Assignment
1 TD+
2 TD-
3 RD+
4 Not used
5 Not used
6 RD-
7 Not used
8 Not used

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
6
The IES-3080 / IES-3062 SERIES switches support auto MDI/MDI-X operation. You
can use a straight-through cable to connect PC to switch. The following table below
shows the 10BASE-T/ 100BASE-TX MDI and MDI-X port pin outs.
10/100 Base-TX MDI/MDI-X pins assignment
Pin Number MDI port MDI-X port
1 TD+(transmit) RD+(receive)
2 TD-(transmit) RD-(receive)
3 RD+(receive) TD+(transmit)
4 Not used Not used
5 Not used Not used
6 RD-(receive) TD-(transmit)
7 Not used Not used
8 Not used Not used
Note: “+” and “-” signs represent the polarity of the wires that make up each wire pair.
4.2 Console Cable
IES-3080 / IES-3062 SERIES switches can be management by console port. The DB-9 to
RJ-45 cable can be found in the package. You can connect them to PC via a RS-232 cable
with DB-9 female connector and the other end (RJ-45 connector) connects to console port of
switch.
PC pin out (male) assignment RS-232 with DB9 female connector DB9 to RJ 45
Pin #2 RD Pin #2 TD Pin #2
Pin #3 TD Pin #3 RD Pin #3
Pin #5 GD Pin #5 GD Pin #5

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
7
WEB Management
5.1 Configuration by Web Browser
This section introduces the configuration by Web browser.
5.1.1 About Web-based Management
An embedded HTML web site resides in flash memory on the CPU board. It contains
advanced management features and allows you to manage the switch from anywhere on the
network through a standard web browser such as Microsoft Internet Explorer.
The Web-Based Management function supports Internet Explorer 5.0 or later. It is based
on Java Applets with an aim to reduce network bandwidth consumption, enhance access
speed and present an easy viewing screen.
Note: By default, IE5.0 or later version does not allow Java Applets to open sockets. You need to explicitly modify
the browser setting in order to enable Java Applets to use network ports.
Preparing for Web Management
The default value is as below:
IPAddress: 192.168.10.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.10.254
User Name: admin
Password: admin
System Login
1. Launch the Internet Explorer.
2. Type http:// and the IP address of the switch. Press “Enter”.

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
8
3. The login screen appears.
4. Key in the username and password. The default username and password is
“admin”.
5. Click “Enter” or ”OK” button, then the main interface of the Web-based
management appears.
Login screen
Main Interface
Main interface

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
9
5.1.2 System Information
System Information interface
System Information
The system information will display the configuration of Basic Setting / Switch Setting page.
Enable Location Alert
When click , PWR1, PWR2 and PWR3 LEDs of the switch will
start to flash together, and click , the LEDs will stop flashing.
5.1.3 Front Panel
Show the panel of IES-3080 / IES-3062 SERIES. Click “Close” to close panel on web.

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
10
5.1.4 Basic setting
5.1.4.1 Switch Setting
Switch setting interface
The following table describes the labels in this screen.
Label Description
System Name Assign the name of switch. The maximum length is 64 bytes
System Description Display the description of switch.
System Location Assign the switch physical location. The maximum length is 64
bytes
System Contact Enter the name of contact person or organization
5.1.4.2 Admin Password
Change web management login username and password for the management security
issue
Admin Password interface