ORiNG RGS-R9244GP+ Series User manual

G2 G4 G6 G8
G1 G3 G5 G7
LINK/ACT
Console
G25 G26 G27 G28
RGS-R9244GP+
R.M.
Ring
Reset
10/100/
1000T
Fault
10GSFP+
G10 G12 G14 G16
G9 G11 G13 G15
G18 G20 G22
G17 G19 G21 G23
G24
PWR
Quick Installation Guide
Version 1.2
Quick Installation Guide
Introduction
PRINTED ON RECYCLED PAPER
QIG RGS-R9244GP+ Series 1907-2-29-RGSR9244GP+-1.2
The which consist of , and
are rack-mount Ethernet switches with twenty-four
10/100/1000BaseT(X) Ethernet ports and four 1G/10G SFP+ ports. The
device provides Layer 3 functions such as RIP, VRRP, and static routing for
more efficient network management and higher security. The
is an enhanced model with dual DC inputs and relay output.
With complete support for Ethernet redundancy protocols such as O-Ring
(recovery time < 30ms over 250 units of connection), O-Chain, MRP, Fast
Recovery, and MSTP (RSTP/STP compatible), the switch can protect your
mission-critical applications from network interruptions or temporary
malfunctions with its fast recovery technology. Featuring a wide operating
temperature from -20 C to 60 C, the device can be managed centrally and
conveniently via Open-Vision utility, web browsers, Telnet and console
(CLI) configuration, making it to be one of the most reliable choice for
highly-managed and Fiber Ethernet application.
RGS-R9244GP+ series RGS-R9244+ RGS-
R9244GP+-E,
RGS-
R9244GP+-E
oo
Preparation
Before you begin installing the switch, make sure you have all of the package
contents available and a PC with Microsoft Internet Explorer 6.0 or later, for
using web-based system management tools.
Elevated Operating Ambient: If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may be
greater than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the maximum
ambient temperature (Tma) specified by the manufacturer.
Safety & Warnings
Dimension
Panel Layouts
1. Console port
2. Reset button
3. Power indicator
4. Ring status LED
5. RM status LED
6. Fault indicator
Front View
Rear View
Package Contents
Contents
QIG
CD
Console Cable
Screw (M4 X6)
Power cord
Rack-mounted
kit (L&R)
Number
X1
X1
X1
X6
X1
X1
RGS-R9244GP+ or
RGS-R9244GP+-E
Pictures
X1
35.50
44.00
8.00 20.00
24.00
32.0
5.50
R3.25
25.50
2.50
4.30
17.80
30.20
342.00
3.0
44.00
431.00
G2 G4 G6 G8
G1 G3 G5 G7
LINK/ACT
Console
G25 G26 G27 G28
RGS-R9244GP+
R.M.
Ring
Reset
10/100/
1000T
Fault
10GSFP+
G10 G12 G14 G16
G9 G11 G13 G15
G18 G20 G22
G17 G19 G21 G23
G24
PWR
1
2 3 4 5 6 7
8 9
10 11
7. LAN ports
8. LED for Ethernet ports LNK/ACT status
9. LED for Ethernet ports speed indicator
10. SFP+ ports
11. LNK/ACT LED for SFP+ ports
1 2
1. Power switch
2. AC power input (100V~240V
/ 50~60Hz)
3. Dual DC power inputs
(RGS-R9244GP+-E Only)
MANAGED
Rack-Mount
GIGABIT
SWITCH
Reduced Air Flow:
Mechanical Loading:
Circuit Overloading:
Installation of the equipment in a rack should be such that the
amount of air flow required for safe operation of the equipment is not
compromised.
Mounting of the equipment in the rack should be such that a
hazardous condition is not achieved due to uneven mechanical loading.
Consideration should be given to the connection of the equipment
to the supply circuit and the effect that overloading of the circuits might have on
overcurrent protection and supply wiring. Appropriate consideration of equipment
nameplate ratings should be used when addressing this concern.
Network Connection
The series have standard Ethernet ports. According to the link type, the switch uses CAT 3, 4,
5,5e UTP cables to connect to any other network devices (PCs, servers, switches, routers, or
hubs). Please refer to the following table for cable specifications.
Cable Types and Specifications:
Cable Type Max. Length Co nn ec tor
10BASE-T Cat. 3, 4, 5 100-ohm UTP 100 m (328 ft) RJ-45
100BASE-TX Cat. 5 100-ohm U TP UTP 100 m (328 ft) RJ-45
1000BASE-T Cat. 5 / Cat. 5e 100-ohm UTP UTP 100 m (3 28 ft) RJ-4 5
Installation
Rack-mounting
Step 1:
Step 2:
Install left and right front mounting brackets to the switch using three screws on each side.
With front brackets orientated in front of the rack, fasten the brackets to the rack using two
more screws.
Layer-3 Managed Gigabit Ethernet
Switch
For pin assignments for different types of cables, please refer to the following tables.
1000Base-T RJ-45
Pin Number Assignment
1BI_DA+
2BI_DA-
3BI_DB+
4BI_DC+
5BI_DC-
6BI_DB-
7BI_DD+
8BI_DD-
10/100Base-T(X) RJ-45
Pin Numb er Assign ment
1TD+
2TD-
3RD+
4Notused
5Notused
6RD-
7Notused
8Notused
RGS-R9244GP+ Series
49.0
AC100-240V 50-60Hz
PW3
V+ V-
PW2 1A@24V
DCPower 12V~48V
AC 100-240V 50-60Hz
PW3
V+ V-
PW2 1A@24V
DCPower 12V~48V
3

QIG Quick Installation Guide
PRINTED ON RECYCLED PAPER
Version 1.2
Quick Installation Guide
ORing Industrial Networking Corp.
Copyright© 2015 ORing
All rights reserved.
TEL: [phone]
FAX: [phone]
Website: www.oring-networking.com
E-mail: [email protected]
RGS-R9244GP+ Series
MANAGED
Rack-Mount
GIGABIT
SWITCH
Layer-3 Managed Gigabit Ethernet
Switch
1. Launch the Internet Explorer and type in IP address of the switch. The default static IP address is
192.168.10.1
2. Log in with default user name and password (both are ). After logging in, you should see
the following screen. For more information on configurations, please refer to the user manual.
For information on operating the switch using ORing’s Open-Vision management utility, please go to
ORing website.
admin
Resetting
To reboot the switch, press the button for 5 seconds.
To restore the switch configurations back to the factory defaults, press the button for 10 seconds.
Reset
Reset
Specifications
ORing Switch Model
Physical Ports
Technology
Ethernet Standards
10/100/1000Base-T(X) with
RJ45 Auto MDI/MDIX
RS-232 Serial Console Port
Switch Properties
Security Features
Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
MAC-based authentication
MACaddresslimit
VLAN (802.1Q) to segregate an secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Web and CLI authentication and authorization
IP source guard
Software Features
Hardware routing, RIP and static routing
IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)
Multiple Registration Protocol (MRP)
MSTP RSTP/STP compatible)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP v2/v3 Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client
DHCP Relay
Modbus TCP
DNS client proxy
SMTP Client
NTP server
(
Network Redundancy O-Ring, O-Chain, MRP, MSTP (RST/STP compatible), Fast Recovery
RS-232 in DB-9 connector with console cable. 115200bps, 8, N, 1
RGS-R9244GP+
24
IEEE 802.3ab for 1000Base-T
IEEE 802.3ae for 10Gigabit Ethernet
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
Switch latency: 7 us
Switch bandwidth: 128Gbps
Max. Number of Available VLANs: 4095
VLAN ID Range: VID 1 to 4094
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
MAC Table 32K
Processing Store-and-Forward
Priority Queues 8
Jumbo frame Up to 10K Bytes
Power
Power consumption(Typ.) 37.4 Watts
Overload current protection Present
Power input 100~240VAC with power socket
1G/10GBase-X with SFP+ port 4
Environmental
-40to85 C(-40to185F)
oo
Storage Temperature
Operating Temperature
Physical Characteristic
Dimension(WxDxH)
Weig ht (g ) 4597g
5% to 95% Non-condensing
Operating Humidity
Enclosure 19 inches rack mountable
431(W)x342(D)x44(H)mm(16.97x13.47x1.73inches)
-20to60 C(-4to140F)
oo
Regulatory Approvals
FCC Part 15, CISPR (EN55022) class AEMI
EN61000-4-2 (ESD)
EN61000-4-3 (RS)
EN61000-4-4 (EFT)
EN61000-4-5 (Surge)
EN61000-4-6 (CS)
EN61000-4-8
EN61000-4-11
EMS
Warranty
5 years
Warranty
5 years
IEC60068-2-27Shock
IEC60068-2-32Free Fall
IEC60068-2-6Vibration
Fault Contact
Relay None
Wiring
462,867hrsTime
10/100Base-T(X) MDI/MDI-X
Pin Number MDI port MDI-X port
1TD+(transmit)RD+(receive)
2TD-(transmit)RD-(receive)
3 RD+(receive) TD+(transmit)
4NotusedNotused
5NotusedNotused
6 RD-(receive) TD-(transmit)
7NotusedNotused
8NotusedNotused
1000Base-T MDI/MDI-X
Pin Number MDI port MDI-X port
1 BI_DA+ BI_DB+
2 BI_DA- BI_DB-
3 BI_DB+ BI_DA+
4 BI_DC+ BI_DD+
5 BI_DC- BI_DD-
6 BI_DB- BI_DA-
7 BI_DD+ BI_DC+
8 BI_DD- BI_DC-
Note: “+” and “-” signs represent the polarity of the wires that make up
each wire pair.
To connect the console port to an external management device, you need an DB-9
cable, which is also supplied in the package. Below is the console port pin assignment
information.
Console Port Pin Definition
PC RS- 232 to DB9 ( male) pin
assignment
RS-232 with DB9 (female) pin
assign ment
PIN#2 RxD PIN#2 RxD
PIN#3 TxD PIN#3 Tx D
PIN#5 GND PIN#5 GND
AC Power Connection
Both RGS-R9244GP+ and RGS-R9244GP+-E can be powered by AC electricity. Simply
insert the AC power cable to the power connector at the back of the switch and
turn on the power switch. The input voltage is 100V~240V / 50~60Hz.
DC Power Connection
The RGS-R9244GP+-E supports dual DC power supplies,
Power Supply 2 (PWR2) and Power Supply 3 (PWR3). The
connections for PWR1, PWR2 and the RELAY are located on
the terminal block. The input voltage is 36V~72VDC.
STEP 1:
STEP 2:
Insert the negative/positive wires into the V-/V+ terminals, respectively.
To keep the DC wires from pulling loose, use a small flat-blade
screwdriver to tighten the wire-clamp screws on the front of the terminal block
connector.
Relay contact
Grounding
The RGS-R9244GP+-E provides two sets of relay contacts on the 6-pin terminal block
to detect user-configured events. The two wires attached to the fault contacts form an
open circuit when a user-configured when an event is triggered. If a user-configured
event does not occur, the fault circuit remains closed.
Grounding and wire routing to help limit the effects of noise due to electromagnetic
interference (EMI). Run the ground connection from the ground screws to the grounding
surface prior to connecting devices.
V+ V- V- V+
1A@24V
DC Power 36~72V
PW2 PW3
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.z for 1000Base-X
Configurations
After installing the switch and connecting cables, start the switch by turning on power.
The green power LED should turn on.
LED indication table
LED Color Status Descri pti on
PWR Green On System power is connected
R.M Green On Device is oper atin g as a ring master
On Ring is e nabled and d evice is running in Ring mode
Ring Green Blinking Ring structure is broken
Fault Amber On Errors (power f ailu re or port malfunctioni ng)
10/100/ 1000Base-T( X) RJ45 port
On Port i s connected
LNK/ACT Green
Blinking Transmit ting data
Amber On Port is run ning at 100 Mbps
Green On Port is running at 1000MbpsSpeed
Off Port is running at 10Mbps
1G/10G SFP+ port
On Port i s connected
LNK/ACT Green
Blinking Transmit ting data
RGS-R9244GP+-E
100~240VAC with power socket, dual 36~72VDC power
input
37.4 Watts
4754g
MTBF(mean time between failures)
371,822hrs
RGS-R9244GP+ Series
Present