
3
4
P1 P2 Fault
IGPS-1080-24V
10/100/
1000T
1
2
7
8
5
6
Practical Operation
QIG Quick Installation Guide
IGPS-1080-24V
IGPS-1080-24V
Version 1.2
Quick Installation Guide
Features
IGPS-1080-24V
IGPS-1080-24V
. IGPS-1080-24V
IGPS-1080-24V
is an
gene
unmanaged Gigabit PoE Ethernet switch with P.S.E. function.
supports Power over Ethernet, a system to transmit electrical
power, along with data, to remote devices over standard twisted-pair cable in an
Ethernet network supports wide range 24~36VDC power inputs
and rates 50VDC P.S.E. power output per port. PoE switch
has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is
a device (switch or hub for instance) that will provide power in a PoE setup. The
wide operating temperature range from -40 C to 70 C can satisfy most of operating
environment. Therefore, the switch is one of the most reliable choices for PoE
Ethernet application.
oo
Introduction Specifications
ORing Switch Model
Physical Ports
Technology
Ethernet Standards
LED Indicators
Green: Power LED x2Power indicator
10/100/1000Base-T(X) P.S.E.
Port in RJ45 Auto MDI/MDIX
IGPS-1080-24V
8
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 4096 MAC addresses
Environmental
-40to85C(-40to185F)
oo
Storage Temperature
Operating Temperature
5% to 95% Non-condensingOperating Humidity
Regulatory Approvals
FCC Part 15, CISPR (EN55022) class AEMI
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge),
EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
EMS
IEC60068-2-27Shock
IEC60068-2-32
IEC60068-2-6Vibration
Free Fall
Warranty
5 years
-40to70C(-40to158F)
oo
Amber:IndicatePWR1orPWR2failure
Fault indicator
Fault contact
Relay Relay output to carry capacity of 1A at 24 VDC
Power
Redundant Input power
Power consumption(Typ.) 7.8 Watts
Overload current protection
Reverse polarity protection
Present
Present
Physical Characteristic
Enclosure IP-30
Dimension(WxDxH)
Weight (g) 452 g
Dual DC inputs 24-36VDC on 6-pin
terminal block
41(W)x94.9(D)x144.3(H) mm (1.62x3.74x5.68inch.)
10/100/1000Base-T(X)
ndicator
RJ45
port i
Green for port Link/Act.
Green for PoE power injected.
IGPS-1080-24V can be used in connecting several PoE P.D. Ethernet devices like IP-
Camera or other Ethernet devices. In addition, there are two different power inputs
at terminal block to avoid interruption caused by power down. When the primary DC
power input fails, the backup power input will take over immediately to guarantee a non-
stop operation.
Connections of Ethernet devices
Industrial Unmanaged Gigabit PoE Switch
PRINTED ON RECYCLED PAPER
EN60950-1Safety
GIGABIT
INDUSTRIAL
SWITCH
Provide 8x10/100/1000Base-T(X) PoE (P.S.E.) ports
Support P.S.E. compliant with on IEEE 802.3at standard up to 30 Watts per port
Support dual wide range 24~36VDC power inputs for power redundancy
Support auto-negotiation and auto-MDI/MDI-X
Support store and forward transmission
Support flow control
Rigid IP-30 housing design
DIN-Rail and wall mounting enabled
Power Connection Guide
Frame Ground
G
Power
Supply
24-36VDC
V+
V-
Warning
Device
GND+24V
V+
V-
DIP Switch Select for
Power Alarm Relay Output
Power
Supply
24-36 VDC
Power
Supply
DIP-2
OFF
OFF
ON
DIP-1
Power failure relay alarm disabled
PWR-1 failure, alarm enabledrelay
PWR-2 failure, alarm enabledrelay
DIP Switch Function
OFF
ON
OFF
Description
DIP-Switch
Power-1failedwarning:(ON)enable,(OFF)disableDIP-Switch 1
Power-2failedwarning:(ON)enable,(OFF)disable
DIP-Switch 2
Front Panel
Power LED
Power Fault LED
A
Gigabit LAN Port
Green: PoE power injected
Green: Link/Act
PoE
ON PWR-1 or PWR-2 failure,
alarm enabledrelay
ON
PWR-1PWR-2
V2-V2+ V1-V1+
1A@24V
Check Polarity First.
!
Warning !!!
24-36Vdc Input only
Processing Store-and-Forward
1907-2-29-IGPS108024V-1.2
Power Input = 24~36VDC
PoEOutput=50VDC
IGPS-1080-24V-I
Dual isolated DC inputs 24-36VDC on
6-pin terminal block
Maximum available PoE power 120 Watts