ORiNG IES-1050A User manual

Industrial
Unmanaged Ethernet Switch
IES-1050A / 1080A Series User’s Manual
Version 1.0
May, 2008.
ORing Industrial Networking Corp.
4F., NO.3, Lane235, Baociao Rd.Sindian City,
Taipei County 23145 Taiwan, R.O.C.
Tel: + 886 2 2918 3036
Fax: + 886 2 2918 3084
Website: www.oring-networking.com
E-mail: [email protected]

IES-1050A / 1080A Series User’s Manual
ORing Industrial Networking Corp 1
Table of Content
Getting to Know Your Switch........................................................................2
1.1 About the IES-1050A / 1080A unmanaged Industrial Switch.......................................2
1.2 Hardware Features.............................................................................................................2
Hardware Installation.....................................................................................3
2.1 Installing Switch on DIN-Rail.............................................................................................3
2.1.1 Mount IES-1050A/ 1080A Series on DIN-Rail ...............................................................3
2.2 Wall Mounting Installation..................................................................................................4
2.2.1 Mount IES-1050A/ 1080A Series on the wall..................................................................4
Hardware Overview........................................................................................6
3.1 Front Panel..........................................................................................................................6
3.2 Front Panel LEDs ...............................................................................................................9
3.3 Bottom Panel.......................................................................................................................9
3.4 Rear Panel.........................................................................................................................10
Cables...........................................................................................................11
4.1 Ethernet Cables................................................................................................................11
4.1.1 100BASE-TX/10BASE-T Pin Assignments...................................................................11
Technical Specifications .............................................................................12

IES-1050A / 1080A Series User’s Manual
ORing Industrial Networking Corp 2
Getting to Know Your Switch
1.1 About the IES-1050A / 1080A unmanaged
Industrial Switch
The IES-1050A / 1080A series are reliable unmanaged industrial switches which can work
under wide temperature, dusty environment and humid condition.
1.2 Hardware Features
Redundant three DC power inputs ( two on terminal block & one on power jack)
Wide Operating Temperature: -40 to 70oC
Storage Temperature: -40 to 85oC
Operating Humidity: 5% to 95%, non-condensing
Casing: IP-30
10/100Base-T(X) Ethernet port
Dimensions(W x D x H) :33 mm(W)x 95 mm(D)x 144.3 mm(H)

IES-1050A / 1080A Series User’s Manual
ORing Industrial Networking Corp 3
Hardware Installation
2.1 Installing Switch on DIN-Rail
Each switch has a DIN-Rail kit on rear panel. The DIN-Rail kit helps switch to fix on the
DIN-Rail. It is easy to install the switch on the DIN-Rail:
2.1.1 Mount IES-1050A / 1080A Series on DIN-Rail
Step 1: Slant the switch and mount the metal spring to DIN-Rail.
Step 2: Push the switch toward the DIN-Rail until you heard a “click” sound.
Metal S
p
rin
g

IES-1050A / 1080A Series User’s Manual
ORing Industrial Networking Corp 4
2.2 Wall Mounting Installation
Each switch has another installation method for users to fix the switch. Awall mount panel
can be found in the package. The following steps show how to mount the switch on the wall.
2.2.1 Mount IES-1050A / 1080A Series on the wall
Step 1: Remove DIN-Rail kit.
Step 2: Use 6 screws that can be found in the package to combine the wall mount panel. Just
like the picture shows below:

IES-1050A / 1080A Series User’s Manual
ORing Industrial Networking Corp 5
The screws specification shows in the following two pictures. In order to prevent switches
from any damage, the screws should not larger than the size that used in IES-1050A / 1080A
series switches.
Pozidrive
Step 3: Mount the combined switch on the wall.

IES-1050A / 1080A Series User’s Manual
ORing Industrial Networking Corp 6
Hardware Overview
3.1 Front Panel
The following table describes the labels that stick on the IES-1080 / 1062 series.
Port Description
10/100 RJ-45 fast
Ethernet ports
10/100Base-T(X) RJ-45 fast Ethernet ports support
auto-negotiation.
Default Setting :
Speed: auto
Duplex: auto
Flow control : disable

IES-1050A / 1080A Series User’s Manual
ORing Industrial Networking Corp 7
IES-1050A
1. LED for PWR1&PW2. When the PWR1 links, the green led will be light on.
2. LED for Fault Relay. When the power fault occurs, the amber LED will be light on.
3. 10/100Base-T(X) Ethernet ports.
4. LED for Ethernet ports status.
5. Model name

IES-1050A / 1080A Series User’s Manual
ORing Industrial Networking Corp 8
IES-1080A
1. LED for PWR1&PW2. When the PWR1 links, the green led will be light on.
2. LED for Fault Relay. When the power fault occurs, the amber LED will be light on.
3. 10/100Base-T(X) Ethernet ports.
4. LED for Ethernet ports status.
5. Model name

IES-1050A / 1080A Series User’s Manual
ORing Industrial Networking Corp 9
3.2 Front Panel LEDs
LED Color Status Description
PWR1 Green On DC power module 1 activated.
PWR2 Green On DC power module 2 activated.
Fault Amber On Fault relay. Power failure.
10/100Base-T(X) Fast Ethernet ports
On Port link up.
LNK / ACT Green Blinking Data transmitted.
3.3 Bottom Panel
The bottom panel components of IES-1080 / 1062 Series are shown as below:
1. Terminal block includes: PWR1, PWR2 (12-48V DC) and Relay output (1A@24VDC).
2. Power Fault Check
.
1 2

IES-1050A / 1080A Series User’s Manual
ORing Industrial Networking Corp 10
3.4 Rear Panel
The components in the rare of IES-1080 / 1062 Series are shown as below:
1. Screw holes for wall mount kit.
2. DIN-Rail kit

IES-1050A / 1080A Series User’s Manual
ORing Industrial Networking Corp 11
Cables
4.1 Ethernet Cables
The IES-1050A / 1080A series switches have standard Ethernet ports. According to the
link type, the switches use CAT 3, 4, 5,5e UTP cables to connect to any other network device
(PCs, servers, switches, routers, or hubs). Please refer to the following table for cable
specifications.
Cable Types and Specifications
Cable Type Max. Length Connector
10BASE-T Cat.3, 4, 5 100-ohm UTP 100 m (328 ft) RJ-45
100BASE-TX Cat.5 100-ohm UTP UTP 100 m (328 ft) RJ-45
4.1.1 100BASE-TX/10BASE-T Pin Assignments
With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for transmitting data, and
pins 3 and 6 are used for receiving data.
RJ-45 Pin Assignments
Pin Number Assignment
1 TD+
2 TD-
3 RD+
4 Not used
5 Not used
6 RD-
7 Not used
8 Not used
The IES-1050A / 1080A Series switches support auto MDI/MDI-X operation. You can
use a straight-through cable to connect PC to switch. The following table below shows
the 10BASE-T/ 100BASE-TX MDI and MDI-X port pin outs.
MDI/MDI-X pins assignment

IES-1050A / 1080A Series User’s Manual
ORing Industrial Networking Corp 12
Pin Number MDI port MDI-X port
1 TD+(transmit) RD+(receive)
2 TD-(transmit) RD-(receive)
3 RD+(receive) TD+(transmit)
4 Not used Not used
5 Not used Not used
6 RD-(receive) TD-(transmit)
7 Not used Not used
8 Not used Not used
Note: “+” and “-” signs represent the polarity of the wires that make up each wire pair.
Technical Specifications
ORing Switch Model IES-1080A IES-1050A
Physical Ports
10/100 Base-T(X)
Ports in RJ45
Auto MDI/MDIX 8 5
Technology
Ethernet Standards IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED indicators
Power indicator Green : Power LED x 2
Fault indicator Yellow : Indicate PWR1 or PWR2 failure
10/100TX RJ45 port
indicator Green for port Link/Act. Yellow for Duplex/Collision
Fault contact
Relay Relay output to carry capacity of 1Aat 24VDC

IES-1050A / 1080A Series User’s Manual
ORing Industrial Networking Corp 13
Power
Redundant Input
power Dual DC inputs. 12-48VDC on 6-pin terminal block.
Power consumption
(Typ.) 4 Watts 3.5 Watts
Overload current
protection Present
Reverse polarity
protection Present
Physical
Characteristic
Enclosure IP-30
Dimension (W x D x
H) 33(W) x 95(D) x 144.3(H) mm (1.30 x 3.74 x 5.68 inch.)
Weight (g) 391 382g
Environmental
Storage Temperature -40 to 85oC (-40 to 185oF)
Operating
Temperature -40 to 70oC (-40 to 158oF)
Operating Humidity 5% to 95% Non-condensing
Regulatory
approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty 5 years