Osram ADB Stagelight LEXPERT PROFILE L User manual

www.adbstagelight.com
Congratulations on choosing an ADB product! We thank you for your custom.
Please note that this xture - like all the others in the wide ADB range - has been designed and made with total
quality assurance to ensure excellent performance and best meet your expectations and requirements.
EN
LEXPERT PROFILE L
INSTRUCTION MANUAL
Zoom 15-30 & Zoom 25-50
AG2300E41200 - AG2500E41200

LEXPERT PROFILE L
2
I DEX
1. SAFETY I STRUCTIO
2. THE U IT CO STRUCTIO
3. I STALLATIO
4. POWER
5. CO TROL PA EL
6. MAI FU CTIO
7. HOW TO CO TROL THE U IT
7.1 DMX Address Setting
7.2 DMX Configuration
7.3 DMX Connection
8. TROUBLESHOOTI G
9. FIXTURE CLEA I G
10. DATASHEET

LEXPERT PROFILE L
3
E
IT
DE
ES
FR
RU
How to get your SAFETY INSTRUCTIONS in multilingual version.
You may always download the multilingual Safety Instruction manual for
this ADB product from:
www.adbstagelight.com
Rif: FIS00X - Safety Information EXPERT PROFI E
Come ottenere le INFORMAZIONI DI SICUREZZA nella versione
multilingue.
Puoi sempre scaricare la versione multilingue delle Informazioni di
Sicurezza per questo prodotto ADB al seguente link:
www.adbstagelight.com
Rif: FIS00X - Safety Information EXPERT PROFI E
So erhalten Sie Ihr INFORMATIONEN ZUR SICHERHEIT in der
mehrsprachigen Version.
Sie können die mehrsprachige Version des Handbuchs mit
Sicherheitshinweisen für dieses ADB Produkt unter folgendem ink
herunterladen:
www.adbstagelight.com
Rif: FIS00X - Safety Information EXPERT PROFI E
Cómo obtener tu INFORMACIONES DE SEGURIDAD en la versión
multilingüe.
Siempre puedes descargar la versión multilingüe del Manual de
Instrucciones de Seguridad para este producto ADB en el siguiente
enlace.
www.adbstagelight.com
Rif: FIS00X - Safety Information EXPERT PROFI E
Comment obtenir votre CONSIGNES DE SÉCURITÉ dans la version
multilingue.
Vous pouvez toujours télécharger la version multilingue du Manuel
d’Instructions de Sécurité pour ce produit ADB au lien suivant :
www.adbstagelight.com
Rif: FIS00X - Safety Information EXPERT PROFI E
Где достать ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ на
нескольких языках.
Вы всегда ожете скачать ногоязычную инструкцию по технике
безопасности для данного изделия ADB пo ссылке:
www.adbstagelight.com
Rif: FIS00X - Safety Information EXPERT PROFI E
1. SAFETY I FORMATIO

LEXPERT PROFILE L
4
Warning:
Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.
•Unpack and check carefully there is no transportation damage before using the unit.
• The unit is for indoor use only. Use only in a dry location.
• The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure that no ventilation slots are blocked.
• Disconnect main power before replacement or servicing.
•Make sure there are no flammable materials close to the unit while operating as it is fire hazard.
• Use safety cable when fixes this unit. DO NOT handle the unit by taking its head only, but always by taking its base.
• In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled
people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts.
•DO NOT touch any wire during operation as high voltage might be causing electric shock.
• To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.
• DO NOT open the unit within five minutes after switching off.
• The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
• ote: Use only the color gel that can resist high temperature. (> 300°C)
Caution:
There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require
service, please contact your nearest dealer.
Installation notes :
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating.
And make sure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also always
use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.
The equipment must be fixed by the professionals. And it must be fixed at a place where is out of the touch of people and has no one pass by or under it.

LEXPERT PROFILE L
5
2. THE U IT CO STRUCTIO
Screw
Two triangles
signs
T
2
3. I STALLATIO
2
5
134
1
1. ens Module
2. Clip for Gel Holder
3. Bracket
4. Main Body
5. Gobo Slot
oosen two screws on two sides of Main Body (MB), rotate the zoom as the arrow and align it with two triangles signs, put the zoom into the MB - Fig. 2
Rotate the zoom as the arrow shown, align it with two triangles sign, and tighten the two screws on two sides of the unit to fix the zoom - Fig. 3
Two triangles
signs
Two triangles
signs
Screw
3

LEXPERT PROFILE L
6
4. POWER
Yellow/Green
4
The power requirements are as follows:
Voltage: AC100-240V, 50/60Hz
The fixture is supplied with a power cable (14 AWG brown and blue cables) installed ready for connection.
Power cord colors - Fig. 4
ock out power to the installation.
Connect the conductors in the power cable to the distribution circuit as follows:
Connect the brown wire to live (one phase).
Connect the blue wire to neutral.
Connect the yellow wire to ground (earth).
Check that all installation is completed and carry out appropriate tests and safety checks before applying power.

LEXPERT PROFILE L
7
1. Display: To show the various menus and the selected functions.
2. LED:
3. Dimmer Adjust Knob: Adjust the lightness for the unit
4. Button:
5. DMX I : For DMX512 link, use 5-pin X R cable to link the unit and the DMX controller;
6. DMX OUT: For DMX512 link, use 5-pin X R cable to link the next unit and output DMX signal;
7. ETHER ET: Transfers fixture’s information to a main controller
8. Fuse (T 6.3A): To protect the unit from damage of over current;
9. MAI S I /OUT: PowerCon connection from main power supply or to the next unit;
MASTER On Master Mode
SLAVE On Slave Mode
DMX On DMX input present
ME U To select the programming functions
DOW To go backward in the selected functions
UP To go forward in the selected functions
E TER To confirm the selected functions
5. CO TROL PA EL
5

LEXPERT PROFILE L
8
To select any functions, press the ME U button until the required function is showing on the display.
Select the function by pressing the E TER button and the display will blink. Use the DOW and UP button to change the mode.
Once the required mode has been selected, press the E TER button to setup to go back to the functions without any changes press the ME U button again.
Hold and press the ME U button for one second or wait for one minute to exit the menu mode. The main functions are shown below:
6. MAI FU CTIO
MENU
Setup
DMX Address
Output Mode
Data Input
Ethernet Interface
Display Setting
Frequency
1
512
Dimmer Setting
DMX Modes
Dimmer Curve
Mode1
Mode2
Mode3
Mode4
Mode5
Boost
Dimmer Speed
Regulated
Silent
Ultra Silent
Auto
DMX
Art-Net
Network
Art-Net
Repeat on DMX
Display Invert
Contrast
uminosity
Backlight
1200
1800
2400
3000
3600
4200
4800
Temp. Unit
600
Quadratic
inear
Inv. square
S curve
Smooth
Fast
Mask
Net
Sub Net
Universe
Yes
No
Yes
No
Yes
No
0
10
0
30
° C
° F
IP

LEXPERT PROFILE L
9
MENU
Information
Manual CTR
Advanced
Firmware
Network
Art-net
DMX Value
Fan Speed
Temperature
DMX in Rate
Frequency
I out
Hours
Device ID
Dimmer
Dimmer Fine
Strobe
RDM
Slave Mode
Factory Settings
Data oss Settings
IP
Mask
DHCP on/off
Net
Sub Net
Universe
Dimmer
Dimmer fine
Strobe
Control
ed Fan
PCB Fan
ed:
CPU:
in ms
Fred Selec.
Unit
ed
Unit
eds
0
255
On
Off
Black Out
ast State
Master/Slave
Master
Slave
Yes
No

LEXPERT PROFILE L
10
DMX Address
To select the DMX Address, press the E TER button to show DMX ADDRESS on the display. Use the DOW /UP button to adjust the address from 1
to 512. Once the address has been selected, press the E TER button to setup, to go back to the functions without any changes press the ME U button
again. Hold and press the ME U button for one second or wait for one minute to exit the menu mode.
Setup
To select Setup press the E TER button to confirm, use the UP/DOW button to select DMX Modes, Dimmer Settings, Output Modes, Data Input,
Ethernet Interface, Display Setting or Frequency.
DMX Modes
To select the DMX Modes, press the E TER button to show DMX Modes on the display. Use the DOW /UP button to select the Mode1, Mode2, Mode3,
Mode4 or Mode5. Once the mode has been selected, press the E TER button to setup, to go back to the functions without any changes press the
ME U button again. Hold and press the ME U button for one second or wait for one minute to exit the menu mode.
Dimmer Settings
To select the Dimmer Settings, press the E TER button to show Dimmer Settings on the display. Use the DOW /UP button to select the Dimmer
Curve or Dimmer Speed. Once the mode has been selected, press the E TER button to setup, to go back to the functions without any changes press
the ME U button again. Hold and press the ME U button for one second or wait for one minute to exit the menu mode.
Dimmer Curve
To select the Dimmer Curve, press the E TER button to show Dimmer Curve on the display. Use the DOW /UP button to select the Quadratic, Linear,
Inv.square or S Curve. Once the mode has been selected, press the E TER button to setup, to go back to the functions without any changes press the
ME U button again. Hold and press the ME U button for one second or wait for one minute to exit the menu mode.
DIMMER CURVES
Curve 1 - Linear:
The increase in light intensity appears to be linear as DMX value is increased.
Curve 2 - Quadratic:
ight intensity control is finer at low levels and coarser at high levels.
Curve 3 - Inverse Square:
ight intensity control is coarser at low levels and finger at high levels.
Curve 4 - (S-curve):
ight intensity control is finer at low levels and high levels and coarser at medium levels.
Dimmer Speed
To select the Dimmer Speed, press the E TER button to show Dimmer Speed on the display. Use the DOW /UP button to select the Fast or Smooth.
Once the mode has been selected, press the E TER button to setup, to go back to the functions without any changes press the ME U button again.
Hold and press the ME U button for one second or wait for one
Output Modes
To select the Output Modes, press the E TER button to show Output Modes on the display. Use the DOW /UP button to select the Boost, Regulated,
Silent or Ultra Silent. Once the mode has been selected, press the E TER button to setup, to go back to the functions without any changes press the
ME U button again. Hold and press the ME U button for one second or wait for one minute to exit the menu mode.
Data Input
To select the Data Input, press the E TER button to show Data Input on the display. Use the DOW /UP button to select the Auto, DMX or Art- et.
Once the mode has been selected, press the E TER button to setup, to go back to the functions without any changes press the ME U button again.
Hold and press the ME U button for one second or wait for one minute to exit the menu mode.
Ethernet interface
To select the Ethernet Interface, press the E TER button to show Ethernet Interface on the display. Use the DOW /UP button to select the etwork,
Art-net or Repeat on DMX. Once the mode has been selected, press the E TER button to setup, to go back to the functions without any changes
press the ME U button again. Hold and press the ME U button for one second or wait for one minute to exit the menu mode.
Linear Quadratic Inverse Square S-curve