Panasonic MAZLxxxH Series User manual

Zener Diodes
1
Publication date: November 2005 SKE00011DED
MAZLxxxH Series
Silicon planar type
For surge absorption circuit
■Features
•Four elements anode-common type
•Power dissipation PD: 200 mW
■Absolute Maximum Ratings Ta=25°C
Unit: mm
Parameter Symbol Rating Unit
Power dissipation *PD200 mW
Junction temperature Tj150 °C
Storage temperature Tstg −55 to +150 °C
■Common Electrical Characteristics Ta=25°C ±3°C
Note) *:P
D=200 mW achieved with a printed circuit board.
Parameter Symbol Conditions Min Typ Max Unit
Zener voltage*VZIZSpecified value V
Zener rise operating resistance RZK IZSpecified value Ω
Zener operating resistance RZIZSpecified value Ω
Reverse current IRVRSpecified value µA
2.90
1.9
±0.1
0.16
+0.10
–0.06
2.8
+0.2 –0.3
1.1
+0.3 –0.1
1.1
0 to 0.1
+0.2 –0.1
1.50
(0.65)
0.4
±0.2
+0.25 –0.05
(0.95) (0.95)
0.30
+0.10
–0.05
543
12
+0.20
–0.05
5˚
10˚
Refer to the list of the
electrical characteristics
within part numbers
Internal Connection
5
2
43
1
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
2. Electrostatic breakdown voltage: ±10 kV
Test method: IEC1000-4-2 (C =150 pF, R =330 Ω, Contact discharge: 10 times)
3. *: The temperature must be controlled 25°C for VZmesurement.
VZvalue measured at other temperature must be adjusted to VZ(25°C)
VZguaranted 20 ms after current flow.
1: Cathode 1 4: Anode
2: Cathode 2 5: Cathode 4
3: Cathode 3
EIAJ: SC-74A Mini5-G1 Package
This product complies with the RoHS Directive (EU 2002/95/EC).

MAZLxxxH Series
SKE00011DED
2
■Electrical characteristics within part numbers Ta= 25°C ±3°C
VZ(V) IR (mA) RZ (Ω)R
ZK (Ω)
IZVR
I
Z
=5 mA I
Z
=0.5 mA
Min Nom Max (mA) Max (V) Max Max
Part number
Zener voltage
Marking symbol
MAZL068H 6.4 6.8 7.2 5 0.1 4 30 60 6.8Z
MAZL082H 7.7 8.2 8.7 5 0.1 5 30 60 8.2Z
MAZL120H 11.4 12.0 12.7 5 0.05 9 30 80 12Z
Zener
operating
resistance
Reverse current
PDTaIZVZIFVF
RZIZSZIZCtVR
10 −3
468101214
10 −2
10 −1
1
10
102
Zener voltage VZ(V)
Zener current IZ(mA)
Ta= 25°C
MAZL120H MAZL082H MAZL068H
0
025
0
20015010050
50
100
150
200
250
Ambient temperature T
a
(°C)
Power dissipation P
D
(mW)
Cu foil
t =0.035 mm
10 mm
0.8 mm
10 mm
10 −2
0 0.4 0.8 1.
2
10 −1
1
10
102
Forward voltage V
F
(V)
Forward current I
F
(mA)
Ta= 25°C
10 −1
1
10
102
Zener operating resistance RZ(Ω)
11010
2
Zener current IZ(mA)
Ta= 25°C
MAZL082H
MAZL068H
MAZL120H
0
12
10
8
6
4
2
0 10203040506
0
Zener current I
Z
(mA)
Temperature coefficient of zener voltage
S
Z
(mV / °C)
Ta= 25°C to 150°C
MAZL082H
MAZL068H
MAZL120H
0
10
0
20
4812
30
Terminal capacitance Ct(pF)
Reverse voltage VR(V)
Ta= 25°C
MAZL068H
MAZL082H
MAZL120H
Zener rise
operating
resistance
This product complies with the RoHS Directive (EU 2002/95/EC).

Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
–Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
 Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.