Panasonic MX-101SP2WTB User manual

© Panasonic Corporation 2010 Unauthorized copy-
ing and distribution is a violation of law.
Order No. PTW1004513CE
Blender
Model No. MX-101SP2WTB
Model No. MX-101SP2WTH
Model No. MX-101SP2WTM
Model No. MX-101SP2WTN
Chassis
Product Color White
Destination WTB: Saudi Arabia / WTH: Kuwait /
WTM: Qatar, Lebanon, Oman /
WTN: UAE, PGF
TABLE OF CONTENTS PAGE PAGE
1 Safety Precautions----------------------------------------------- 2
2 Specifications ----------------------------------------------------- 3
3 Location of Controls and Components ------------------- 4
4 Operating Instructions------------------------------------------ 6
4.1. How to Use Blender--------------------------------------- 6
4.2. How to Use Dry & Wet Mill------------------------------ 8
4.3. How to Clean ----------------------------------------------10
5 Troubleshooting Guide----------------------------------------11
6 Disassembly and Assembly Instructions ---------------12
6.1. Juice cup and Cutter Assy -----------------------------12
6.2. Mill cup and Cutter Assy -------------------------------12
6.3. Bottom plate -----------------------------------------------13
6.4. Connector(Lower) ----------------------------------------13
6.5. Cord U -----------------------------------------------------14
6.6. Motor Assy------------------------------------------------- 14
6.7. Brush Assy------------------------------------------------- 14
6.8. Switch Assy------------------------------------------------15
6.9. Safety unit--------------------------------------------------15
7 Wiring Connection Diagram---------------------------------16
7.1. Schematic diagram--------------------------------------16
7.2. Basic wiring diagram------------------------------------17
8 Exploded View and Replacement Parts List-----------18
8.1. PARTS LOCATION--------------------------------------18
8.2. REPLACEMENT PARTS LIST -----------------------19
8.3. PACKING INSTRUCTION-----------------------------20

2
1 Safety Precautions

3
2 Specifications
MX-101SP2WTB/MX-101SP2WTH/MX-101SP2WTM/MX-101SP2WTN
Using blender Using dry
Power supply 220-240V 50-60Hz
Power Consumption 180-200W
Operation rating Continuous (Repetition 3 min. ON, 1 min. OFF) 90 seconds at time
Container capacity Maximum 1,000ml Dry: Maximum 50g
Container material Plastic Plastic
Dimensions (H x W x D) approx. 35.1 x 20.8 x 20.0cm approx. 25.8 x 20.8 x 20.0cm
Weight approx. 1.8kg approx. 1.6kg

4
3 Location of Controls and Components

5

6
4 Operating Instructions
4.1. How to Use Blender

7

8
4.2. How to Use Dry & Wet Mill

9

10
4.3. How to Clean

11
5 Troubleshooting Guide
Symptom Possible Cause Countermeasure
• Motor fails to Armature Assy Or humming
noise is head 1. Motor(Armature Assy. Field Assy) defec- tive.
2. Wiring connection improper
3. Switch defective
4. Cord U broken
5. The current breaking function of switch
is on
6. Motor short-circuitted
7. Wear of Brush Assy
1. Replace Motor
(Armature Assy, Field Assy)
2. Correct it
3. Replace Switch
4. Replace Cord U
5. Push “OFF” and then “ON” of Switch
6. Replace Motor
(Armature Assy, Field assy)
7. Replace the two Brush Assy at the same
time
• Cutter Assy fails to rotate 1. Cutter Assy shaft seizes up
2. Wear of Connector 1. Replace Cutter Assy and Cup Base Assy 2. Replace Connector(Upper or lower)
• Noises and vibrations are observed 1. Fastened conditions of screws improper
2. Cutter Assy deformed
3. Motor Shaft eccentric
4. Assembly of Juice Cup improper or fas-
tened conditions of Cup Base Assy to
Juice cup improper.
1. Fasten tightly
2. Replace Cutter Assy
3. Replace armature Assy
4. Reassemble properly
• Juice or other material leaks 1. Juice cup cracked
2. Pac king improperly fixed
3. Packing damaged
4. Juice cup and Cup Base Assy insuffi-
ciently fastened
1. Replace Juice cup
2. Properly fix Packing
3. Replace Packing
4. Fasten them firmly
• Current Breaking Function of Switch Assy
fails and cause motor burning Breaker of Switch Assyshort-circuited Replace both Motor(Armature Assy and Field Assy) and Switch Assy

12
6 Disassembly and Assembly Instructions
6.1. Juice cup and Cutter Assy
1. Turn the connector upper clockwise with long nose pliers.
Then the Cutter Assy and connector upper can be
removed.
6.2. Mill cup and Cutter Assy
1. Secure the mill cup and turn the cup base Assy counter
clockwise. Then the packing can be removed.

13
2. Turn the connector upper clockwise with long nose pliers.
Then the Cutter Assy and connector upper can be
removed.
6.3. Bottom plate
1. The bottom plate can be removed when its four screws
are lossened.
6.4. Connector(Lower)
1. Hold the part under the motor shaft by means of a
screws-driver, then turn the connector (lower) clockwise.
The connector (lower) can be removed.
• The connector (lower) can be relatively easily removed
by means of hitting its projecting section clockwise with
use of a screwdriver grip in a forceful manner.

14
6.5. Cord U
1. Pull out while the faston terminal with the part of the Cord
U.
6.6. Motor Assy
1. Takes out a motor from the body and it removes.
The brush can be exchanged by metal fittings coming
when bending fixation metal fittings.
6.7. Brush Assy
1. Inserts a minus driver in a draught of the brush folder and
the brush fixation metal fittings in the motor.
• When inserting a whisk, it is possible to put either side of the
board of the fixation metal fittings in the brush folder by hold-
ing it.

15
6.8. Switch Assy
1. Take out a switch from the body and remove it.
6.9. Safety unit
1. Safety unit can be picked up the body.

16
7 Wiring Connection Diagram
7.1. Schematic diagram

17
7.2. Basic wiring diagram

18
8 Exploded View and Replacement Parts List
8.1. PARTS LOCATION

19
8.2. REPLACEMENT PARTS LIST
Notes:Important safety notice
• Components identified by mark have special characteristics important for safety.
• " When replacing any of these components use only manufacturer's specified parts."
MODEL No.MX-101SP2
Safety Ref. No. Part No. Part Name & Description Pcs/Set Remarks
WTB WTH WTM WTN
<PARTS LIST>
1X0190-181 Cupassy 1111
2X0201-121 Cover 1111
3X0224-050 Cutterassy 1111
4X0217-010 Wavewasher 3333
5X0227-031 Mainshaftwasher 3333
6X0194-030 Cup 1111
7X0227-060 Shaftwasher 3333
8X0411-100R Connector(upper) 3333
9X0190-191 Cupassy(mill) 1111Brown
9X0190-191D Cupassy(mill) 1111White
10X0203-230 Millcup 2222
11X0224-120 Millcutterassy 2222
12X0205-081 Millpacking 2222
13X0195-101 CupbaseUassy(mill) 1111Brown
13X0195-101D CupbaseUassy(mill) 1111White
14X0401-071 Connector(lower) 1111
15 X0110-570 Body U 1
15 X0110-580 Body U 1
15 X0110-590 Body U 1
15 X0110-600 Body U 1
16X0175-020 Attentionsheet 1111
17X0104-010 Sealcap 1111
18X0505-021 Safetydevicepin 1111
19X0501-410 Switchassy 1111
20X0103-020 Bodycovergum 3333
21X0701-590 Motorassy 1111
2253-029086 Brushassy 2222
23X0130-170 Bottomplate 1111
24X0133-020 Leg 4444
25XTN4+16BFJ Screw 4444
26 X0173-570 Name plate 1
26 X0173-580 Name plate 1
26 X0173-590 Name plate 1
26 X0173-600 Name plate 1
27 X0550-920 Cord U 1 1
27 X0550-930 Cord U 1 1
<PACKING SPECIFICATIONS>
X0903-970 Outer carton 1
X0903-980 Outer carton 1 1 1
X0911-290 ProtectionA 1111
X0912-290 ProtectionB 1111
X0917-010 PaperPlateA 1111
X0915-101 PaperPlateB 1111
X0909-930 Operatinginstructions 1111
X0168-240 Showingcard 1111
XZB18X24A03 Plasticbag 1111Forcord
XZB10X50A03 Plasticbag 1111

20
8.3. PACKING INSTRUCTION