Panasonic MX-EX1511 User manual

English
MX-EX1511 MX-EX1531
Operating Instructions
Arahan Penggunaan
(Kegunaan rumah tangga)
Blender (Household Use)
Model No.

EN2
Safety Precautions .............................................................................................................................. EN2
Important Information ......................................................................................................................... EN4
Parts Names and Instructions ........................................................................................................... EN5
Before Use ............................................................................................................................................ EN5
How to Use ........................................................................................................................................... EN6
Cleaning and Care ............................................................................................................................... EN7
Safety Lock ......................................................................................................................................... EN7
Overload and Overheating Protection .............................................................................................. EN7
Troubleshooting .................................................................................................................................. EN8
...................................................................................................................................... EN8
The following signals indicate the degree of harm and damage when the product is misused.
WARNING:
Indicates potential hazard that could result in serious injury or death.
CAUTION:
Indicates potential hazard that could result in minor injury or property damage.
Thank you for purchasing this Panasonic product.
Please read these instructions carefully to use the product correctly and safely.
Before using this product please give your special attention to "Safety Precautions" and
"Important Information" (P. EN2 - EN4).
Please keep this Operating Instructions for future use.
these instructions.
Contents
Safety Precautions
Please make sure to follow
these instructions.
WARNING
Do not allow infants and children to play with packaging material.
Do not disassemble, repair or modify this appliance.
Do not damage the power cord or power plug.
pulling, hanging /

EN3
English
Do not plug or unplug the power plug with wet hands.
Do not use the appliance if the power cord or power plug is damaged or the power plug is
loosely connected to the outlet.
Insert the power plug firmly.
Do not immerse the motor housing, power cord or power plug in water, or splash it with
water and / or any liquid.
This appliance is not intended for use by persons (including children) with reduced
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Keep the appliance and its power cord out of reach of children.
Unplug the power plug, and wipe with a dry cloth.
Discontinue using the appliance immediately and unplug in the unlikely event that this
appliance stops working properly.
The appliance power fails.
There is an unpleasant smell.
Make sure the voltage indicated on the label of the appliance is the same as your local supply.
rated wattage of the outlet.
Be careful if hot liquid is poured into the blender jug as it can be ejected out of the
appliance due to a sudden steaming.
Do not use the appliance on the following places.
Near a wall or furniture.
Place the appliance on a firm, dry, clean flat worktop.
Do not blend or place over 60 °C ingredients into the blender jug.
Do not put any liquids or wet ingredients into the mill container.
WARNING
CAUTION

EN4
Do not use the appliance outdoors.
Do not wrap the power cord around the motor housing.
Do not operate the appliance without ingredients.
jug while the appliance is operating.
Do not stretch the gasket to avoid deforming.
Do not replace any parts of the appliance with non-genuine spare parts.
Do not carry the appliance by holding the power cord, blender jug or mill container.
Do not insert any object in the gaps of the appliance.
Do not blend more than the working capacity marked on the blender jug. For the mill
)
Do not use prohibited ingredients as stated in this instructions. (P. EN5)
Do not push the safety lock pin with any implement, such as thin stick etc. (P. EN7)
Unplug the plug when the appliance is not in use.
Make sure to hold the power plug when unplugging it. Never pull on the power cord.
Beware not to trip over or get caught in the power cord while in use.
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
Care shall be taken when handling the sharp blades, emptying the blender jug, mill
container and during cleaning. Do not clean the blender blade or mill blade by bare hand.
Always disconnect the appliance from the supply if it is left unattended and before
assembling, disassembling, moving or cleaning.
approaching parts that move in use.
)
Ensure to clean the appliance especially surfaces in contact with food after use. (P. EN7
"Cleaning and Care")
This product is intended for household use only.
CAUTION
Important Information
Safety Precautions
Please make sure to follow
these instructions.

EN5
English
Meat
Fish
Prohibited Ingredients
Dice food first (1 -
1
Handling Precautions
Blender gasket
Lid
Blender jug
Power cord
Motor housing
Working capacity
1 500 mL)
Power plug
Blender Dry mill
Parts Names and Instructions
Blender
Before Use
, and then
assemble them securely. (P. EN6 "How to Use" and P. EN7 "Cleaning and Care" )
The blender is intended for
Blending fluids
e.g. fruit /
Pureeing cooked ingredients
Rotary switch
2
High speed (continuous operation)
1
Low speed (continuous operation)
0
OFF
P
Pulse (
turned to "P" position )
Repeatedly turn and release for intermittent rotation.
Mill container
Mill gasket
Foods Time
Pepper 20 30 - 60 seconds
Dried chilies 20 30 - 60 seconds
50 15 - 30 seconds
Do not place any ingredients more than 50 in the mill container.
use again.
Handling Precautions
Dry mill
The dry mill is intended for
Grinding dry ingredients
Note:
Inner lid
1 set
2 sets

EN6
2
Attach blender jug to the motor housing.
1
Place the ingredients into blender jug, and then close the lid.
Align the on the motor
housing with the on the
until you hear a click sound.
3
Plug in. Hold the blender jug, and then turn the rotary
switch to "1" or "2" position to start.
If the appliance stops during
operation. (P. EN8)
When adding ingredients or
Add ingredients as shown right.
Blender
How to Use
4
When blending is completed, turn the rotary switch
to "0" position to switch off.
Unplug.
Turn the blender jug
anticlockwise to remove it,
open the lid and take out the
ingredients.
2
1
To disassemble
Turn anticlockwise
To assemble
Turn clockwise
gasket is not damaged
and placed properly
1
2
3
1
2
Align the on the motor
housing with the on the
mill container.
Twist mill container clockwise
until you hear a click sound.
4
When grinding is completed, turn the rotary switch to
"0" position to switch off.
Unplug.
Turn the mill container
anticlockwise to remove it,
open the mill container, and
take out the ingredients.
1
Turn the mill container upside down and place
the ingredients in it. Twist the mill container base
clockwise until you hear a click sound.
Dry mill
To disassemble
Turn anticlockwise
If the appliance stops during
operation. (P. EN8)
2
Attach the mill container to the motor housing.
3
Plug in. Hold the mill container, and then turn the rotary
switch to "1" or "2" position to start.
2
1
2
1
To assemble
Turn clockwise
1
2
Make sure the mill
gasket is not damaged
and placed properly
12
3
4
12
3
4
1
2
3
1
2
3

EN7
English
Containers and other parts Mill Container Base Motor housing
Wash the parts using a soft sponge soaked in
diluted kitchen detergent (neutral). Carefully clean
blades with a brush. Rinse and dry thoroughly.
Carefully clean blades with a brush. Do
not use water.
( )
Wipe motor housing with a damp cloth.
In case of overload and overheating, the protection device is triggered to stop operation and it is not abnormal.
After rotation stops, follow the below steps:
Do not use the appliance repeatly without any countermeasure.
1
Turn the rotary switch to "0" position, unplug the appliance.
2
Remove blender jug or mill container from motor housing.
Reduce the ingredients to less than half. (For blender jug, it also can add liquid.)
3
Reset the blender jug or mill container, start blending again. (P. EN6)
If the appliance still does not operate after performing the above, overheating protection has been activated.
Turn the rotary switch to "0" position, unplug and rest the appliance for about 15 minutes or more (until motor housing returns to a
normal temperature) to release overheating protection before using again.
Safety lock pin
Safety pin
Cleaning and Care
Safety Lock
Overload and Overheating Protection
Do not wash any part of the appliance in the dishwasher.
Blender jug prewash
Dry the lid thoroughly, then keep it separately.
Storing
The safety lock has been designed to prevent the blender
from switching on when blender jug or mill container is not
properly in place.
When the safety pin on back of the blender jug base is
pushed during assembling, motor does not operate.

EN8
Even turn to "1" or
"2" position, the
appliance
does not start
blending.
The blender jug / mill container is not set properly.
/ mill container and motor housing, then
twist it firmly until you hear a "click" sound.
The blender jug base / mill container base is not assembled tightly.
The protection device of overload or overheating is activated.
The power plug is disconnected.
Insert the power plug into outlet firmly.
Rotation stops
abruptly.
The protection device of overload or overheating is activated.
There is abnormal
noise or vibration
increases.
Too much ingredients.
Reduce ingredient amount.
The blender jug base / mill container base is not assembled tightly.
The ingredient is
leaking.
The blender jug base / mill container base is not assembled tightly.
The blender gasket / mill gasket is not attached or attached loosely.
Attach it properly.
Foreign matters are attached to the blender gasket / mill gasket.
The blender gasket / mill gasket is damaged.
The blade is idling.
The liquid amount is not enough.
Too much ice cubes. (e.g. juice with a lot of ice)
When the blender is used When the dry mill is used
Power supply 220 - 240 V 50 - 60 Hz
Power consumption 330 360 W
Rated time
Continuous operation
( Repeat the cycle of 3 minutes ON and then
1 minute OFF )
Continuous operation
( Repeat the cycle of 1 minute ON and then 2
minutes OFF )
Working capacity 1
500 50
2.0 1.6
Before calling for service, please check through this section.
Problem Cause and Action
Troubleshooting

É

É
É
É
É
É