Panasonic ET-RFV200C User manual

Thank you for purchasing this Panasonic product.
■
Before using this product, please read the instructions carefully, and
save this manual for future use.
ENGLISH
Model No. ET-RFV200C
Operating Instructions
Replacement lter unit Commercial Use
TQZJ632-1

Notes on replacing the air filter unit
zTurn off the power before you replace the air lter unit.
zWhen attaching the air lter unit, make sure that the projector is stable, and work in
an environment that is safe, even in the event of the air lter unit dropping.
zDo not operate the projector with the lter removed. Dust may accumulate on the
optical elements degrading picture quality.
zDo not put anything into the air vents. Doing so may result in malfunction of the
projector.
zThe air lter unit to be replaced should be an unused product.
Read this rst!
Replacing the unit
JReplacement of the air lter unit (side)
1) Remove the air lter cover.
zOpen the air lter cover in the direction of
the arrow as the gure shows and remove
it.
2) Remove the air lter unit.
i) Hold the knob of the air lter unit and pull out it
in the direction of the arrow, then the top of the
air lter unit will pop up.
ii) Take out the air lter unit upwards.
zAfter removing the air lter unit, remove
large foreign objects and dust from the air
lter compartment and the projector’s air
intake port if there are any.
3) Insert the new air lter unit.
zHold the air lter unit and make sure that
the knob is outside of the projector, then
perform Step 2) in the reverse order.
zDo not press the lter part when push it
into the projector at last.
4) Install the air lter cover.
zMake sure that the air lter cover is closed
tightly.
E-2
The air lter units are provided in the side and back of the projector.
Air filter cover (side)
Air filter unit (side)
Knob

ENGLISH
E-3
JResetting the Filter Counter
Be sure to reset the Filter counter after replacing the air lter unit.
After replacing the air lter, reset the lter counter. Otherwise, the power of the projector
may be turned off for safety.
1) Turn on the projector, press the <MENU> button to display the main menu.
2) Press ▲▼ to select [Setting] and then press ► or the <ENTER> button to ac-
cess the sub-menu item.
3) Press ▲▼ to select [Filter counter] and then press ► or the <ENTER> button
to access the next item.
4) Press ▲▼ to select [Filter counter reset] and press the <ENTER> button.
z[Filter counter Reset?] appears. Select [Yes] to continue. Another conrmation
dialog box appears, select [Yes] to reset the [Filter counter].
JReplacement of the air lter unit (back)
1) Remove the air lter cover.
zOpen the air lter cover in the direction of
the arrow as the gure shows and remove
it.
2) Remove the air lter unit.
zHold the knob of the air lter unit and pull
out it in the direction of the arrow.
zAfter removing the air lter unit, remove
large foreign objects and dust from the air
lter compartment and the projector’s air
intake port if there are any.
3) Insert the new air lter unit.
zHold the air lter unit and make sure that
the knob is outside of the projector, then
perform Step 2) in the reverse order.
zDo not press the lter part when push it
into the projector at last.
4) Install the air lter cover.
zMake sure that the air lter cover is closed
tightly.
Air filter cover (back)
Air filter unit (back)
Knob

松下电器 （中国）有限公司
北京市朝阳区景华南街 5 号远洋光华中心 C 座3 层、6 层
网站：https://panasonic.cn
原产地 ：中国
发行 ：2022 年6月
© 松下互联株式会社 2022 版权所有 TI0612JZ2062 -PT
Printed in China