Panasonic ET-RFE200 User manual

Model No. ET-RFE200
ENGLISH
Operating Instructions
Replacement lter unit Commercial Use
Thank you for purchasing this Panasonic product.
■ Please read these operating instructions and the projector operating in-
structions carefully, and then use this product correctly.
■Please save this Operating Instructions for future use.
DPQX1199ZB/X1

Notes on replacing the air filter unit
zTurnoffthepowerbeforeyoureplacetheairlterunit.
zWhenattachingtheairlterunit,makesurethattheprojectorisstable,andworkin
anenvironmentthatissafe,evenintheeventoftheairlterunitdropping.
zDonotoperatetheprojectorwiththelterremoved.Dustmayaccumulateonthe
opticalelementsdegradingpicturequality.
zDonotputanythingintotheairvents.Doingsomayresultinmalfunctionofthe
projector.
zTheairlterunittobereplacedshouldbeanunusedproduct.
Read this rst!
E-1

ENGLISH
E-2
Replacing the unit
JAir lter unit
Filterpreventsdustfromaccumulatingontheopticalelementsinsidetheprojector.Shouldthe
lterbecomecloggedwithdustparticles,itwillreducecoolingfans’effectivenessandmayresultin
internal heat buildup and adversely affect the life of the projector.
If<FILTER>indicatorlightsorange,replacethelterimmediately.
JReplacement of the air lter unit
1) Turn off the projector, and unplug the AC
power cord from the AC outlet.
2) Clean up the dust on the projector and
around the air vents.
3) Press ▼ downwards on the lter cover to
release the latch and open the lter cover.
4) Pull out the air lter unit.
zPickthetabandframeoftheairlterunit,
release the lock with pressing the tab
rightwardsinthegure,andthenpull.
5) Put the new one back into the position.
z
Holdtheairlterunitthatthetabisinleftsidein
thegure,put therightsideinthegurerst,
andpressthetabsideuntilmakeaclicksound.
6) Close and press up to lock the lter cover.
zMakesurethattheairltercoverisclosed
tightly.
7) Connect the AC power cord to the projector
and turn on the projector.
JResetting the Filter Counter
BesuretoresettheFiltercounterafterreplacingtheairlterunit.
1) Turn on the projector, press the <MENU> button to display the main menu.
2) Press ▲▼ to select [Setting] and then press ► or the <ENTER> button to access
the sub-menu item.
3) Press ▲▼ to select [Filter counter] and then press ► or the <ENTER> button to
access the next item.
4) Press ▲▼ to select [Filter counter reset] and press the <ENTER> button.
5) [Filter counter Reset?] appears. Select [Yes] to continue.
6) Another conrmation dialog box appears, select [Yes] to reset the [Filter counter].
Filter cover
Air filter unitTab
[OPEN▼▲LOCK]

TI0412ZF2062 -PT
PrintedinChina
Panasonic Connect Co., Ltd.
© Panasonic Connect Co., Ltd. 2022
Web Site : https://panasonic.net/cns/projector/