PANCONTROL PAN VOLTFINDER User manual

Manual
PAN VOLTFINDER
Contactless Voltage tester

EN 2
Contents
1. Introduction .................................................................................... 2
2. Scope of delivery ............................................................................. 3
3. Safety Instructions........................................................................... 3
4. Symbols Description ........................................................................ 4
5. Panel Description ............................................................................ 4
. General Specifications ..................................................................... 5
7. Operating Instructions ....................................................................
8. Maintenance ...................................................................................
9. Guarantee and Spare Parts ............................................................. 7
1. Introduction
Thank you for purchasing PANCONTROL. For over 20 years the PANCONTROL
brand is synonymous with practical, economical and professional measuring
instruments. We hope you enjoy using your new product and we are
convinced that it will serve you well for many years to come.
Please read this operating manual carefully before using the device to become
familiar with the proper handling of the device and to prevent faulty
operations. Please follow all the safety instructions. Nonobservance cannot
only result in damages to the device but in the worst case can also be harmful
to health.

EN 3
2. cope of delivery
After unpacking please check the package contents for transport damage
and completeness.
•Measurement device
•Battery(s)
•Manual
3. afety Instructions
To ensure the safe use of the device, please follow all the safety and operating
instructions given in this manual.
-Before using the device, make sure that test leads and the device are in
good condition and the device is working properly (e.g. by connecting to
known voltage sources).
-The device may not be used if the housing or the test leads are damaged,
if one or more functions are not working, if functions are not displayed, or
if you suspect that something is wrong.
-If the safety of the user cannot be guaranteed, the device may not be
operated and secured against use.
-Do not use the device outdoors, in humid surroundings or in
environments that are subjected to extreme temperature fluctuations.
-Do not store the device in places which are exposed to direct sunlight.
-Remove the battery if the device is not used for a long time.
-If changes or modifications are made to the device, the operational safety
is no longer guaranteed and the warranty becomes void.

EN 4
4. ymbols Description
Conforms to the relevant European Union directive (EN- 1010)
Risk of Danger. Important information See instruction manual
Attention! Hazardous voltage. Risk of electric shock.
Product is protected by double insulation
This product should not be disposed along with normal
domestic waste at the end of its service life but should be
handed over at a collection point for recycling electrical and
electronic devices.
CAT III The device is designed for making measurements in building
installations. Examples are measurements on junction boards,
circuit breakers, wiring, switches, permanently installed
sockets, devices for industrial use as well as permanently
installed motors.
5. Panel Description
1. Voltage tester
2. Clip
3. Power button LED flashlight
4. Battery compartment cover
5. LED flashlight

EN 5
6. General pecifications
Display LED + beep
Range 200 to 00 V (50/ 0 Hz)
Operating
temperatute
-10º C to 30º C / < 95% Relative Humidity (%RH)
30º C to 40º C / < 75% Relative Humidity (%RH)
40º C to 50º C / < 45% Relative Humidity (%RH)
Power supply 3V (2 x 1,5 V AAA)
Pollution degree II
Weight 49 g
Function Range Resolution
Accuracy of the
value displayed in %
AC voltage
(V) 50/ 0 Hz
200 V
-
00 V

EN
7. Operating Instructions
Note: Before each measurement check the correct funktion at a known
power source.
1. Place the probe tip close to the circuit to be tested.
2. If the LED in the probe illuminates the measured object is under AC
voltage. (200 V to 1000 V)
3. To activate the flash light press and hold the LED button.
8. Maintenance
Only authorized service technicians may repair the instrument.
Changing the battery(s)
If the device does not respond during the function test replace the battery.
1. Open the battery compartment by sliding the rear panel.
2. Replace the battery. Mind the correct polarity.
3. Replace the battery compartment lid and secure the screw.
4. Disposal of the flat battery should meet environmental standards.
Cleaning
If the instrument is dirty after daily usage, it is advised to clean it by using a
humid cloth and a mild household detergent. Prior to cleaning, ensure that
instrument is switched off and disconnected from external voltage supply and
any other instruments connected. Never use acid detergents or dissolvent for
cleaning.

EN 7
9. Guarantee and pare Parts
PANCONTROL instruments are subject to strict quality control. However,
should the instrument function improperly during daily use, your are
protected by a 24 months warranty from the date of purchase (valid only
with invoice).
Only trained technicians may carry out repairs to this device. In case of
spare part requirement or in case of queries or problems, please get in
touch with your vendor or: