Paradox Digiplex DGP2-648 User manual

Digiplex & DigiplexNE - 1 - Modules Programming Guide
48-Zone LED Keypad Module
This model does not support installer programming capabilities, therefore you cannot program other modules or the panel on the
combus using this unit.
*000=disabled; 001=A1; 002=A2; 003=A3; 004=A4.
Do not assign the same display number to more than one section. A maximum of 4 partitions can be displayed on the keypad.
U= Default Settings
Section Data Description Default
[001] __/__/__ (000 to 004)* Partition 1 Display 001 = (LED A1)
[002] __/__/__ (000 to 004)* Partition 2 Display 002 = (LED A2)
[003] __/__/__ (000 to 004)* Partition 3 Display 003 = (LED A3)
[004] __/__/__ (000 to 004)* Partition 4 Display 004 = (LED A4)
[005] __/__/__ (000 to 004)* Partition 5 Display 000
[006] __/__/__ (000 to 004)* Partition 6 Display 000
[007] __/__/__ (000 to 004)* Partition 7 Display 000
[008] __/__/__ (000 to 004)* Partition 8 Display 000
SECTION [009] : Keypad Options SECTION [010] : Beep on Trouble
Option OFF ON Option OFF ON
[1] Confidential Mode UDisabled NEnabled [1] Beep on System Trouble/Clock Loss UDisabled N Enabled
[2] Exit Confidential Mode U
Press key
NEnter code [2] Beep on Communicator Trouble UDisabled N Enabled
[3] Muting UDisabled NEnabled [3] Beep on Module/Combus Trouble UDisabled N Enabled
[4] Beep on Exit Delay NDisabled UEnabled [4] Beep on Zone Trouble UDisabled N Enabled
[5] Chime on Zone Closure UDisabled NEnabled [5] to [8] Future Use NN/A NN/A
[6] to [8] Future Use NN/A NN/A
SECTION [011] : PGM & Keypad Tamper Options
Option OFF ON
[1] PGM State UN.O. NN.C.
[2] PGM Deactivation Mode U
Deactiva-
tion Event
N PGM Timer
[3] PGM Base Time U1 second N1 minute
[4] Future Use NN/A N N/A
[5] Keypad Tamper UDisabled NEnabled
[6] to [8] Future Use NN/A NN/A
DGP2-648

Digiplex & DigiplexNE - 2- Modules Programming Guide
Refer to “Appendix 1: Programming PGMs” on page 39 for the PGM Table. Only Event Groups 000 to 055 can be used to program the
module’s PGM.
The keypad will display up to a total of 48 zones, however any zone from 1 to 96 can be selected. Do not assign more than one LED
Number to a zone.
Section Data Description Default
[012] __/__/__ (005 to 255 seconds) Confidential Mode Timer 120
[013] __/__/__ (001 to 255; see option [3] in section [011])PGMTimer 005
Event Group Feature Group Start # End #
Section Section Section Section
PGM Activation [014] __/__/__ [015] __/__/__ [016] __/__/__ [017] __/__/__
PGM Deactivation [018] __/__/__ [019] __/__/__ [020] __/__/__ [021] __/__/__
Section Description
[030] Test PGM: Activates the PGM for 8 seconds to verify if the PGM is functioning properly.
[040] Zone Display Reset: Resets zone display sections [101] to [196] to default values.
Zone Display
Section LED
Number Zone Displayed Default Section LED Number Zone Displayed Default Section LED Number Zone Displayed Default
[101] __/__/__ Zone 1 001 [133] __/__/__ Zone 33 033 [165] __/__/__ Zone 65 000
[102] __/__/__ Zone 2 002 [134] __/__/__ Zone 34 034 [166] __/__/__ Zone 66 000
[103] __/__/__ Zone 3 003 [135] __/__/__ Zone 35 035 [167] __/__/__ Zone 67 000
[104] __/__/__ Zone 4 004 [136] __/__/__ Zone 36 036 [168] __/__/__ Zone 68 000
[105] __/__/__ Zone 5 005 [137] __/__/__ Zone 37 037 [169] __/__/__ Zone 69 000
[106] __/__/__ Zone 6 006 [138] __/__/__ Zone 38 038 [170] __/__/__ Zone 70 000
[107] __/__/__ Zone 7 007 [139] __/__/__ Zone 39 039 [171] __/__/__ Zone 71 000
[108] __/__/__ Zone 8 008 [140] __/__/__ Zone 40 040 [172] __/__/__ Zone 72 000
[109] __/__/__ Zone 9 009 [141] __/__/__ Zone 41 041 [173] __/__/__ Zone 73 000
[110] __/__/__ Zone 10 010 [142] __/__/__ Zone 42 042 [174] __/__/__ Zone 74 000
[111] __/__/__ Zone 11 011 [143] __/__/__ Zone 43 043 [175] __/__/__ Zone 75 000
[112] __/__/__ Zone 12 012 [144] __/__/__ Zone 44 044 [176] __/__/__ Zone 76 000
[113] __/__/__ Zone 13 013 [145] __/__/__ Zone 45 045 [177] __/__/__ Zone 77 000
[114] __/__/__ Zone 14 014 [146] __/__/__ Zone 46 046 [178] __/__/__ Zone 78 000
[115] __/__/__ Zone 15 015 [147] __/__/__ Zone 47 047 [179] __/__/__ Zone 79 000
[116] __/__/__ Zone 16 016 [148] __/__/__ Zone 48 048 [180] __/__/__ Zone 80 000
[117] __/__/__ Zone 17 017 [149] __/__/__ Zone 49 000 [181] __/__/__ Zone 81 000
[118] __/__/__ Zone 18 018 [150] __/__/__ Zone 50 000 [182] __/__/__ Zone 82 000
[119] __/__/__ Zone 19 019 [151] __/__/__ Zone 51 000 [183] __/__/__ Zone 83 000
[120] __/__/__ Zone 20 020 [152] __/__/__ Zone 52 000 [184] __/__/__ Zone 84 000
[121] __/__/__ Zone 21 021 [153] __/__/__ Zone 53 000 [185] __/__/__ Zone 85 000
[122] __/__/__ Zone 22 022 [154] __/__/__ Zone 54 000 [186] __/__/__ Zone 86 000
[123] __/__/__ Zone 23 023 [155] __/__/__ Zone 55 000 [187] __/__/__ Zone 87 000
[124] __/__/__ Zone 24 024 [156] __/__/__ Zone 56 000 [188] __/__/__ Zone 88 000
[125] __/__/__ Zone 25 025 [157] __/__/__ Zone 57 000 [189] __/__/__ Zone 89 000
[126] __/__/__ Zone 26 026 [158] __/__/__ Zone 58 000 [190] __/__/__ Zone 90 000
[127] __/__/__ Zone 27 027 [159] __/__/__ Zone 59 000 [191] __/__/__ Zone 91 000
[128] __/__/__ Zone 28 028 [160] __/__/__ Zone 60 000 [192] __/__/__ Zone 92 000
[129] __/__/__ Zone 29 029 [161] __/__/__ Zone 61 000 [193] __/__/__ Zone 93 000
[130] __/__/__ Zone 30 030 [162] __/__/__ Zone 62 000 [194] __/__/__ Zone 94 000
[131] __/__/__ Zone 31 031 [163] __/__/__ Zone 63 000 [195] __/__/__ Zone 95 000
[132] __/__/__ Zone 32 032 [164] __/__/__ Zone 64 000 [196] __/__/__ Zone 96 000

Digiplex & DigiplexNE - 3- Modules Programming Guide
Module Connection Drawings
MODULE CONNECTION OVERVIEW

Digiplex & DigiplexNE - 4- Modules Programming Guide
LCD KEYPAD MODULE (DGP2-641) 48-ZONE LED KEYPAD MODULE (DGP2-648)
ANNUNCIATOR MODULE (DGP2-ANC1)

Digiplex & DigiplexNE - 5- Modules Programming Guide
Appendix 1: Programming PGMS
A PGM is a programmable output that toggles to its opposite state (i.e. a normally open PGM will close) when a specific event occurs in the system. For
example, a PGM can be used to reset smoke detectors, activate strobe lights, open/close garage doors and much more. When a PGM closes, the module
supplies a ground to the PGM (transistor PGM), or the link between N.C. and COM is established (Relay PGM), which activates any device or relay
connected to it. When a PGM opens, the circuit opens from ground (transistor PGM), or the link between N.O. and COM is established, therefore no power
is provided to the devices connected to it.
PGM ACTIVATION EVENT
The PGM Activation Event determines which event from what source will activate the PGM. The Event Group specifies the event, the Feature Group
identifies the source, and the Start # and End # sets the range within the Feature Group (see PGM Programming Table below).
For example, the APR3-PGM4 (See “4-PGM Expansion Module” on page 15) can activate PGM1 when the partition is armed by User Access Codes 256 to
260. Therefore:
Event Group section [004] = 010 “Arming with User Code”
Feature Group section [005] = 001 “User Codes 256 to 511”
Start # section [006] = 000 (representing user code 256)
End # section [007] = 004 (representing user code 260)
Enter the sections that correspond to the Event Group, Feature Group, Start # and End # of the desired PGM and enter the data as required.
PGM DEACTIVATION OPTION
Once the PGMs are activated, they can deactivate when another event occurs or after a period of time. The PGM Deactivation Option determines which
method is used, the PGM Deactivation Event or the PGM Timer. Enter the section that corresponds to the desired PGM and enable or disable the option.
PGM DEACTIVATION EVENT
When the PGM Deactivation Option (see above) is disabled, the PGM Deactivation Event determines which event from what source will return the PGM to
its original state. The Event Group specifies the event, the Feature Group identifies the source, and the Start # and End # determine the range within the
Feature Group. The complete PGM Programming Table appears below.
For example, the APR3-PGM4 (See “4-PGM Expansion Module” on page 15) can deactivate PGM1 when zone 3 opens. Therefore:
Event Group section [008] = 001 “Zone is Open”
Feature Group section [009] = 000 “Zone Numbers”
Start # section [010] = 003
End # section [011] = 003
Enter the sections that correspond to the Event Group, Feature Group, Start # and End # of the desired PGM and enter the data as required.
PGM PROGRAMMING TABLE
Event Group Feature Group Start # End #
PGM Activation Event PGM __/__/__ __/__/__ __/__/__ __/__/__
PGM Deactivation Event PGM __/__/__ __/__/__ __/__/__ __/__/__
Event Group Event Feature Group Feature Start # End #
000 Zone is OK
000
255 = any Zone # Zone Numbers
001 to 096 001 to 096
001 Zone is Open 001 to 096 001 to 096
002 Zone is Tampered 001 to 096 001 to 096
003 Zone is in Fire Loop Trouble 001 to 096 001 to 096
004 Non-reportable Event 000
TLM Trouble (see NOTE 3 on page 44) 000 000
Smoke detector reset 001 001
Arm with no entry delay 002 002
Arm in Stay mode 003 003
Arm in Away mode 004 004
Full arm when in Stay mode 005 005
Voice module access 006 006
Remote control access 007 007
PC Fail to communicate 008 008
Midnight 009 009

Digiplex & DigiplexNE - 6- Modules Programming Guide
004 (cont’d) Non-reportable Event 000
NEware User Login 010 010
NEware User Logout 011 011
User Initiated Callup 012 012
Force Answer 013 013
Force Hangup 014 014
255 Any non-reportable event Not Used Not Used
005 User Code entered on Keypad
000 User Codes 000 to 255 000 to 255 000 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
006 User/Card Access on door 000 Door Numbers 001 to 032 001 to 032
255 Any door number Not Used Not Used
007 Bypass Programming Access
000 One-touch Bypass Programming 000 000
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
008 TX Delay Zone Alarm 000 Zone Numbers 001 to 096 001 to 096
255 Any zone number Not Used Not Used
009 Arming with Master
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
010 Arming with User Code
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
011 Arming with Keyswitch 000 Keyswitch numbers 001 to 032 001 to 032
255 Any keyswitch number Not Used Not Used
012 Special Arming 000
Auto Arming 000 000
Arming by WinLoad 001 001
Late to Close 002 002
No Movement Arming 003 003
Partial Arming 004 004
One-touch Arming 005 005
Future Use 006 006
Future Use 007 007
(InTouch) Voice Module Arming 008 008
255 Any special arming event Not Used Not Used
013 Disarm with Master
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
014 Disarm with User Code
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
Event Group Event Feature Group Feature Start # End #

Digiplex & DigiplexNE - 7- Modules Programming Guide
015 Disarm with Keyswitch 000 Keyswitch numbers 001 to 032 001 to 032
255 Any keyswitch Not Used Not Used
016 Disarm after alarm with Master
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
017 Disarm after alarm with User Code
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
018 Disarm after alarm with Keyswitch 000 Keyswitch numbers 001 to 032 001 to 032
255 Any keyswitch Not Used Not Used
019 Alarm Cancelled with Master
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
020 Alarm Cancelled with User Code
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
021 Alarm Cancelled with Keyswitch 000 Keyswitch numbers 001 to 032 001 to 032
255 Any keyswitch Not Used Not Used
022 Special Disarm Events 000
Auto Arm Cancelled 000 000
One-touch Stay/Instant Disarm 001 001
Disarming with WinLoad 002 002
Disarming with WinLoad after alarm 003 003
WinLoad cancelled alarm 004 004
Future Use 005 005
Future Use 006 006
Future Use 007 007
(InTouch) Voice Module Disarming 008 008
255 Any special disarm event Not Used Not Used
023 Zone Bypassed
000
255 = any zone # Zone Numbers
001 to 096 001 to 096
024 Zone in Alarm 001 to 096 001 to 096
025 Fire Alarm 001 to 096 001 to 096
026 Zone Alarm Restore 001 to 096 001 to 096
027 Fire Alarm Restore 001 to 096 001 to 096
028 Early to Disarm by User
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
029 Late to Disarm by User
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
Event Group Event Feature Group Feature Start # End #

Digiplex & DigiplexNE - 8- Modules Programming Guide
030 Special Alarm 000
Emergency Panic (Keys 1 & 3) 000 000
Medical Panic (Keys 4 & 6) 001 001
Fire Panic (Keys 7 & 9) 002 002
Recent Closing 003 003
Police Code 004 004
Global Shutdown 005 005
255 Any special alarm event Not Used Not Used
031 Duress Alarm by User
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 001 to 255 001 to 255
002 User Codes 512 to 767 001 to 255 001 to 255
003 User Codes 768 to 999 001 to 231 001 to 231
255 Any User Code Not Used Not Used
032 Zone Shutdown 000
255 = any zone # Zone Numbers 001 to 096 001 to 096
033 Zone Tamper 001 to 096 001 to 096
034 Zone Tamper Restore 001 to 096 001 to 096
035 Special Tamper 000 Keypad Lockout 000 000
036 Trouble Event 000
TLM Trouble (see NOTE 2 on page 44) 000 000
AC Failure 001 001
Battery Failure 002 002
Auxiliary Current Limit 003 003
Bell Current Limit 004 004
Bell Absent 005 005
Clock Trouble 006 006
Global Fire Loop 007 007
255 Any trouble event Not Used Not Used
037 Trouble Restore 000
TLM Trouble 000 000
AC Failure 001 001
Battery Failure 002 002
Auxiliary Current Limit 003 003
Bell Current Limit 004 004
Bell Absent 005 005
Clock Trouble 006 006
Global Fire Loop 007 007
255 Any trouble restore event Not Used Not Used
038 Module Trouble 000
Combus Fault 000 000
Module Tamper 001 001
ROM/RAM error 002 002
TLM Trouble 003 003
Fail to Communicate 004 004
Printer Fault 005 005
AC Failure 006 006
Battery Failure 007 007
Auxiliary Failure 008 008
255 Any module trouble Not Used Not Used
039 Module Trouble Restore 000
Combus Fault 000 000
Module Tamper 001 001
ROM/RAM error 002 002
TLM Trouble 003 003
Fail to Communicate 004 004
Printer Fault 005 005
AC Failure 006 006
Battery Failure 007 007
Auxiliary Failure 008 008
255 Any module trouble restore event Not Used Not Used
Event Group Event Feature Group Feature Start # End #

Digiplex & DigiplexNE - 9- Modules Programming Guide
040 Fail to Communicate on telephone
Number 000 Telephone Number 001 to 004 001 to 004
255 Any telephone number Not Used Not Used
041 Low Battery on Zone
000
255 = any Zone # Zone Numbers
001 to 096 001 to 096
042 Zone Supervision Trouble 001 to 096 001 to 096
043 Low Battery on Zone Restored 001 to 096 001 to 096
044 Zone Supervision Trouble Restored 001 to 096 001 to 096
045 Special Events 000
Power up after total power down 000 000
Software reset (Watchdog) 001 001
Test Report 002 002
Future Use 003 003
WinLoad In (connected) 004 004
WinLoad Out (disconnected) 005 005
Installer in programming 006 006
Installer out of programming 007 007
255 Any special event Not Used Not Used
046 Early to Arm by User
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
047 Late to Arm by User
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
048 Utility Key 000 Utility Key 001 to 064†* 001 to 064 001 to 064
255 Any Utility Key†* Not Used Not Used
049 Request for Exit
000
255 = any Door
Number Door Numbers
001 to 032 001 to 032
050 Access Denied 001 to 032 001 to 032
051 Door Left Open Alarm 001 to 032 001 to 032
052 Door Forced Alarm 001 to 032 001 to 032
053 Door Left Open Restore 001 to 032 001 to 032
054 Door Forced Open Restore 001 to 032 001 to 032
055 Intellizone Triggered 000 Zone Numbers 001 to 096 001 to 096
255 Any zone number Not Used Not Used
056 to 061 Future Use Future Use Future Use Future Use Future Use
062 Access Granted to User
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
063 Access Denied to User
000 User Codes 001 to 255 001 to 255 001 to 255
001 User Codes 256 to 511 000 to 255 000 to 255
002 User Codes 512 to 767 000 to 255 000 to 255
003 User Codes 768 to 999 000 to 231 000 to 231
255 Any User Code Not Used Not Used
†: see page 44
*: see page 44
Event Group Event Feature Group Feature Start # End #

Digiplex & DigiplexNE - 10 - Modules Programming Guide
NOTE 1: 000 = Occurs in all partitions enabled in the system (refer to the appropriate control panel Programming Guide).
001 = Partition 1 003 = Partition 3 005 = Partition 5 (DGP-NE96 only) 007 = Partition 7 (DGP-NE96 only)
002 = Partition 2 004 = Partition 4 006 = Partition 6 (DGP-NE96 only) 008 = Partition 8 (DGP-NE96 only)
255 = Occurs in at least one partition enabled in the system.
NOTE 2: This TLM trouble event can only be used with Digiplex NE control panels that have two dialers.
NOTE 3: This TLM trouble event can only be used with Digiplex control panels or Digiplex NE control panels that have one dialer.
NOTE 4: This event cannot be used for a module’s PGM programming.
*: If a Keyswitch Input is used, the input must be defined as “Generates a Utility Key Event on Open” or “Generates a Utility Key Event on Open
and Close”. If a remote control is used, the remote control button must be defined as a Utility Key button.
†:Actions that Activate a Utility Key Event:
064 Status 1 See Note 1
on page 44
Armed 000 000
Force Armed 001 001
Stay Armed 002 002
Instant Armed 003 003
Strobe Alarm 004 004
Silent Alarm 005 005
Audible Alarm 006 006
Fire Alarm 007 007
065 Status 2 See Note 1
on page 44
Ready 000 000
Exit Delay 001 001
Entry Delay 002 002
System in Trouble 003 003
Alarm in Memory 004 004
Zones Bypassed 005 005
Bypass, Master, Installer Programming 006 006
Keypad Lockout 007 007
066 Status 3 See Note 1
on page 44
Intellizone Delay Engaged (see Note 4
on page 44) 000 000
Fire Delay Engaged 001 001
Auto Arm 002 002
Arming with Voice Module (set until
Exit Delay finishes) 003 003
Tamper 004 004
Zone Low Battery 005 005
Fire Loop Trouble 006 006
Zone Supervision Trouble 007 007
067 Future Use Future Use Future Use Future Use Future Use
070 Clock N/A Hour Minutes
Utility Key Event Actions
Keypad Utility Keys Keyswitch Inputs
(definition = [3]) Keyswitch Inputs (definition = [4]) Remote Control
Utility Key Event 1 [1] & [2] KS** Input 1 opens KS** Input 1 opens Utility Key 1 RC button‡
Utility Key Event 2 [4] & [5] KS** Input 2 opens KS** Input 1 closes Utility Key 2 RC button‡
Utility Key Event 3 [7] & [8] KS** Input 3 opens KS** Input 2 opens Utility Key 3 RC button‡
Utility Key Event 4 [CLEAR] & [0] or [*] & [0] KS** Input 4 opens KS** Input 2 closes Utility Key 4 RC button‡
Utility Key Event 5 [2] & [3] KS** Input 5 opens KS** Input 3 opens Utility Key 5 RC button‡
Utility Key Event 6 [5] & [6] KS** Input 6 opens KS** Input 3 closes N/A
Utility Key Event 7 [8] & [9] KS** Input 7 opens KS** Input 4 opens N/A
Utility Key Event 8 [0] & [ENTER] or [0] & [#] KS** Input 8 opens KS** Input 4 closes N/A
Utility Key Event 9 N/A KS** Input 9 opens KS** Input 5 opens N/A
Utility Key Event 10 N/A KS** Input 10 opens KS** Input 5 closes N/A
Utility Key Event 11 N/A KS** Input 11 opens KS** Input 6 opens N/A
Utility Key Event 12 N/A KS** Input 12 opens KS** Input 6 closes N/A
Event Group Event Feature Group Feature Start # End #

Digiplex & DigiplexNE - 11 - Modules Programming Guide
** Keyswitch
‡ Refer to the Omnia™ Reference and Installation Manual for remote control button programming instructions.
©2002-2003
Digigard, Digiplex, DigiplexNE, Grafica, InTouch, NEware, Omnia, Paradoor and WinLoad are trademarks or registered trademarks of Paradox Security
Systems Ltd. or its affilitaes in Canada, the United States and/or other countries. All rights reserved.
PosiPIN and PosiProx are trademarks or registered trademarks of Position Technology Inc. or its affilitates in Canada, the United States and/or other
countries. All rights reserved.
Specifications may change without prior notice.
Utility Key Event Actions
Keypad Utility Keys Keyswitch Inputs
(definition = [3]) Keyswitch Inputs (definition = [4]) Remote Control
Utility Key Event 13 N/A KS** Input 13 opens KS** Input 7 opens N/A
Utility Key Event 14 N/A KS** Input 14 opens KS** Input 7 closes N/A
Utility Key Event 15 N/A KS** Input 15 opens KS** Input 8 opens N/A
Utility Key Event 16 N/A KS** Input 16 opens KS** Input 8 closes N/A
Utility Key Event 17 N/A KS** Input 17 opens KS** Input 9 opens N/A
Utility Key Event 18 N/A KS** Input 18 opens KS** Input 9 closes N/A
LN/A LL
N/A
Utility Key Event 31 N/A KS** Input 31 opens KS** Input 16 opens N/A
Utility Key Event 32 N/A KS** Input 32 opens KS** Input 16 closes N/A
Utility Key Event 33 N/A N/A KS** Input 17 opens N/A
Utility Key Event 34 N/A N/A KS** Input 17 closes N/A
LN/A N/A LN/A
Utility Key Event 63 N/A N/A KS** Input 32 opens N/A
Utility Key Event 64 N/A N/A KS** Input 32 closes N/A

PRINTED IN CANADA 12/2003 DGP2648_MODULES-EP08