Paradox TM50 Touch User manual

TM70 (7”) / TM50 (5”) Touchscreen Keypads
Installation Manual
Installation
Figure 1
Tab
Location
Tab
Location
1. Separate the top
assembly from the back
plate. Insert a flathead
screwdriver into the tab
located, as shown in
Figure 1.
SD
Card
SD Card Cover
when needed
2. Mount the back plate
to the wall or to a gang
box using appropriate
screws. Ensure that
the UP arrow on the
back plate is in the up
position.
Note: We recom-
mend to feed the
TM70 with 18
gauge wire.
SD
Card
SD Card Cover
when needed
TM70
TM50
Gang Box
Gang Box
Gang Box
Figure 2
TM70 TM50

TM7050-EI00 | 02/2017 PARADOX.COM
3. Make sure the SD card is installed properly and locked with text
facing backward to wall/connections facing to the front, as shown
in Figure 2.
4. Secure the wire plug to the PCB socket the wires as per the color
code to match the Paradox keypad bus code. The blue wire is key-
pad zone input.
Note: We recommend to feed the TM70 with 18 gauge wire.
5. Attach the SD card cover if needed, then attach top to back top
hooks first then lock the bottom as per Figure 1. The SD card can
be removed if necessary with a flat screw from the top if the metal
cover is not attached or by opening the keypad for loading pic-
tures.
6. Power up the bus and verify that the voltage is higher than 11.5V
(displayed at the bottom right of the main screen as well as the
boot sequence screen).
Technical Specifications
TM70 TM50
Power Input 9 to 15 VDC
Consumption 250mA at max brightness
+ 80mA sounder
150mA at max brightness
+ 80mA sounder
Wire Connection 18 Gauge 18 Gauge recommended,
22 Gauge
Display 7” 800 x 480 5” 480 x 272
Dimensions 17.7 x 11.4 x 1.5 cm
(7 x 4.5 x 0.6 in.)
14.2 x 9.5 x 1.4 cm
(5.6 x 3.75 x 0.56 in.)
Humidity 5-90%
Indoor Temp. Yes
SD Card 4GB; 2GB free
Input Zone
Tamper Built-in, Cover and Wall
Compatibility Swan, EVO, Spectra
Remote Upgrade Swan only
Jpeg Download Swan via Bus, EVO/Spectra SD Card
Auto Dim Yes
Chime Yes
Warranty: For complete warranty information on this product, please
refer to www.paradox.com/terms. Specifications may change
without prior notice.