Petsafe PBC-1000 Setup guide

Indoor Bark Control
operating and training guide
PLEASE READ THIS ENTIRE GUIDE BEFORE BEGINNING
Model Number
PBC-1000

2 Customer Care Center 1-800-732-2677
Important Safety Information
Explanation of Attention Words and Symbols used in
this guide
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
WARNING indicates a hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
CAUTION, used without the safety alert symbol,
indicates a hazardous situation which, if not
avoided, could result in harm to your pet.
Risk of explosion. Do not short circuit, mix old
and new batteries, dispose of in fire, or expose
to water. When batteries are stored or disposed, they must be
protected from shorting. Dispose of used batteries properly.
Not for use with aggressive dogs. Do not use
this Product if your dog is aggressive, or if your
dog is prone to aggressive behavior. Aggressive dogs can cause
severe injury and even death to their owner and others. If you are
unsure whether this product is appropriate for your dog, please
consult your veterinarian or certified trainer.
Humans cannot hear the ultrasonic sound,
however, precautions should be taken when
preparing the Indoor Bark Control for use.
:Keep at arms length away from the human ear to avoid hearing
damage if a dog begins barking during setting up or when the
Indoor Bark Control is operational.

www.petsafe.net 3
:This device is intended for use only with dogs. Never attempt to
use it for any purpose not described in this manual.
:All pets within hearing range will be affected by the ultrasonic tone.
:For best results, use indoors only. Please visit our website or
contact the Customer Care Center for information on PetSafe®
outdoor bark control products.
:The Indoor Bark Control is not a toy. Keep it out of the reach of
children. Use it only for its bark control purpose.

4 Customer Care Center 1-800-732-2677
Thank you for choosing the PetSafe®brand. You and your pet deserve
a companionship that includes memorable moments and a shared
understanding together. Our products and training tools promote a
lifestyle of protection, teaching, and love—essentials that influence
memories for a lifetime. If you have any questions about our products
or training your pet, please visit our website at www.petsafe.net or
contact our Customer Care Center at 1-800-732-2677.
To get the most protection out of your warranty, please register
your product within 30 days at www.petsafe.net. By registering and
keeping your receipt, you will enjoy the product’s full warranty and
should you ever need to call the Customer Care Center, we will be
able to help you faster. Most importantly, PetSafe®will never give
or sell your valuable information to anyone. Complete warranty
information is available online at www.petsafe.net.
Table of Contents
Components......................................................................................5
Features ............................................................................................5
How It Works .....................................................................................5
Key Definitions ..................................................................................6
To Insert and Remove the Battery.....................................................6
Setup .................................................................................................7
What to Expect During Use of the Indoor Bark Control ...................7
Eliminating Unwanted Behavior ........................................................8
Tips and Maintenance ......................................................................8
Frequently Asked Questions .......................................................9
Terms of Use and Limitation of Liability ..........................................10
Customer Care International ...........................................................11
Battery Disposal ..............................................................................11
FCC .................................................................................................11

www.petsafe.net 5
Components
PetSafe®Indoor
Bark Control Unit
Operating Guide
Features
:Automatically corrects excessive barking
:Activated automatically or manually
:No receiver collar needed
:Detects barks up to 25 feet away
How It Works
When the Indoor Bark Control unit is within range of a barking dog, an
internal microphone picks up the sound. The unit automatically emits an
ultrasonic tone that can be heard by dogs but is silent to most humans.
Startled by the high-pitched tone, the dog should stop barking. In time
it will associate its bark with this unpleasant noise. When the dog stops
barking, the ultrasonic tone also stops. It is effective up to 25 feet.
You may also use the Indoor Bark Control unit as a remote trainer.
When your pet exhibits inappropriate behavior, press the manual
control button on top of the unit to emit an ultrasonic tone. The dog
should be startled by the high-pitched tone and stop his poor behavior.
Note: If the dog is deaf or hearing impaired, he may not react to the
Indoor Bark Control.

6 Customer Care Center 1-800-732-2677
Key Definitions
Microphone: Detects barking up to 25 feet away.
Two Color LED: Shows good or low battery. Also lights when activated.
Speaker: Produces the ultrasonic sound.
Button: Manual control activates an ultrasonic tone on demand.
Battery Door: Used to enclose the 9v battery.
Keyholes: Provision for wall mounting.
Battery
Door
Keyholes
Button
Microphone
Two Color
LED
Speaker
To Insert and Remove the Battery
1. The Indoor Bark Control requires a 9-volt battery (not included).
2. Pull the battery door open and install the 9-volt battery with the
positive side oriented as shown.
3. Replace the battery door by positioning the left edge, and snap the
battery door into place.
`
Battery Life
Average battery life is 2 months, depending on how often the dog
barks. To conserve battery life, remove the battery when the Indoor
Bark Control is not in use.
Do not attempt to cut into or pry open the battery.
Be sure to discard the used battery properly.

www.petsafe.net 7
Two Color LED Function and Response
LED Function Red LED Green LED
Normal Operation Off
1 Flash every 5 seconds
Low battery 3 Flashes every 5 seconds Off
Noisy Environment 1 Flash every ½ second Off
Correction On length of correction Off
Setup
The PetSafe®Indoor Bark Control should be placed facing the dog, within
a range not to exceed 25 feet. For best results, the area between the
Indoor Bark Control and the dog should be free of any large obstacles.
What to Expect During Use of the Indoor
Bark Control
Place the PetSafe®Indoor Bark Control within 25 feet or less of the
dog. When the microphone picks up the constant bark of the dog,
it will emit a 2-second high-pitched ultrasonic tone. While the tone
cannot be heard by most humans, it should startle the dog. Most
dogs will understand very quickly that the Indoor Bark Control is
disrupting their urge to bark and will relax and stop barking.
You should notice a reduction in the dog’s barking within the first 2
weeks that the Indoor Bark Control is in use. Please note this product
may not work on deaf or hearing impaired dogs.
Excessive barking can cause a real strain on your family’s
relationship with your pet. Please visit www.petsafe.net to view other
customized solutions to the problem of too much barking.

8 Customer Care Center 1-800-732-2677
Eliminating Unwanted Behavior
To eliminate unwanted behavior other than barking (i.e. jumping on
furniture), the manual activation function can be used.
As soon as your pet begins the earliest sign of misbehavior, press
the manual control button. For example, if you want to teach your
dog to stay off the couch, press the button as soon as he puts one
paw on the seat. Do not wait until he is completely on the couch.
1. Hold the manual button for up to 2 seconds, releasing the button
as soon as your pet stops the misbehavior.
2. If your pet has not stopped the misbehavior after 2 seconds of
correction, release the manual button; then press it again for up
to 2 seconds.
3. Continue this sequence until the misbehavior has stopped.
4. Once the misbehavior has stopped, reward your pet with praise.
Tips and Maintenance
:Before playing with your dog, remove the battery from the unit.
The activity may cause your dog to bark, which could lead to him
associating the play with the correction.
:Remove the battery while not in use.
:If your pet is injured or its mobility is otherwise impaired, contact
your veterinarian or professional trainer before use.
:Do not leave your device unattended where your dog could
accidentally damage it through chewing.
:Do not attempt to repair the device yourself. This will invalidate
the warranty and make repairs more difficult.
:Remove the battery before cleaning.
:Clean the PetSafe®Indoor Bark Control with a damp cloth.
:Do not use any kind of spray chemicals or solvent to clean.
:Do not immerse in water or any other liquid.
Note: The Indoor Bark Control is weather-resistant, not waterproof.
However, if water enters into the microphone it may disrupt the unit’s
operation. After the microphone dries, it will resume working properly.

www.petsafe.net 9
Frequently Asked Questions
What is the range for
the PetSafe®Indoor
Bark Control?
:The PetSafe Indoor Bark Control detects
barking and sends the ultrasonic tone up
to 25 feet.
Is the Indoor Bark
Control effective
on all dogs?
:The product may not work on deaf or
hearing impaired dogs.
Will the Indoor
Bark Control work
for multiple dogs?
:Yes, it is effective on all dogs within the
25 foot range.
Can I use the
Indoor Bark
Control outdoors?
:No, we do not recommend keeping the
product outdoors. PetSafe’s Outdoor
Bark Control products are waterproof
and can work up to 50 feet from a
barking dog. Please visit our website at
www.petsafe.net or contact our Customer
Care Center for more information.
Can a dog become
desensitized to the
ultrasonic sound?
:There are some situations where dogs
become desensitized. To avoid this,
only use the Indoor Bark Control during
periods of unwanted barking (i.e., remove
the battery when you are away).

10 Customer Care Center 1-800-732-2677
Terms of Use and Limitation of Liability
1. Terms of Use
This Product is offered to you conditioned upon your acceptance
without modification of the terms, conditions and notices contained
herein. Usage of this Product implies acceptance of all such terms,
conditions, and notices.
2. Proper Use
This Product is designed for use with pets where training is desired.
The specific temperament of your pet may not work with this Product.
If you are unsure whether this is appropriate for your pet please
consult your veterinarian or certified trainer.
Proper use includes reviewing the entire Guide provided with your
Product and any specific Caution statements.
3. No Unlawful or Prohibited Use
This Product is designed for use with pets only. This pet training
device is not intended to harm, injure or provoke. Using this Product
in a way that is not intended could result in violation of Federal, State
or local laws.
4. Limitation of Liability
In no event shall Radio Systems®Corporation be liable for any direct,
indirect, punitive, incidental, special or consequential damages, or
any damages whatsoever arising out of or connected with the use or
misuse of this Product. Buyer assumes all risks and liability from the
use of this Product.
5. Modification of Terms and Conditions
Radio Systems®Corporation reserves the right to change the terms,
conditions and notices under which this Product is offered.