Philips CID3693/00 User manual

www.philips.com/welcome
Register your product and get support at CID3693
EN Quick Start Guide

1
REVERSE
PARKING
CAMERA CVBS
0DLQXQLW
*36DQWHQQD
3,1
WRRULJLQDO
GLVSOD\VFUHHQ
3,1
WRRULJLQDO&'
SOD\HU
3,1
WRRULJLQDO&'
SOD\HU
3,1
WRRULJLQDOLQFDU
V\VWHP
3,1
WRRULJLQDOLQFDU
V\VWHP
WR&$1ER[
<HOORZ
<HOORZ
ޮ෿൮௘ൿԟ
$9V\VWHP
%ODFN
ޮ෿Ԭଇ௤
<HOORZ
:KLWH
5HG
$8;
ޮ෿൮௘ൿԟ
ޮ෿Ⴛၿ௘ൿԟ
ޮ෿ቔၿ௘ൿԟ
5HDUVFUHHQ
:LUHOHVVKHDGSKRQH
<HOORZ
5HG
:KLWH
ڧᇽ൮௘ൿೊ
ڧᇽႻၿ௘ൿೊ
ڧᇽቔၿ௘ൿೊ

f
2 3
4 5

6
7
8

English
Connect wires 1
1Check the car’s wirings carefully, then
connect them to the unit.
Mount in the dashboard
1If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
2Ensure that the horizontal slant of the car
dashboard opening is between 0 and 20
degrees. The unit cannot be used if the
dashboard opening’s slant angle is above 20
degrees.
3Fix the plastic clips and base support
(removed from the original in-car system)
to the main unit. 2
4Fix the mounting brackets (removed from
the original in-car system) to the left and
right side panels of the main unit. 3
5Fix the exhaust outlets of the original air-
conditioner to the two openings. 4
6Fix the hazard warning switch (removed
from the original in-car system) to the main
unit. 5
7 Slidetheunitintothedashboardandxit
to the car.
8Reconnect the negative terminal of the car
battery.
Turn on
1Press and hold /MUTE/VOL to turn on
the unit.
The available OSD (On-Screen Display)»
languages are displayed.
2Tap a language to select.
To turn off the unit, press and hold• /
MUTE/VOL.
Set date and time
1Tap to display home menu.
2Tap [Settings].
3Tap [Time].
The date/time setup menu is displayed.»
Set date
1Tap [Date].
2Tap on the displayed date information.
3Tap or to set year, month and day.
Set clock mode
1Tap [Clock mode].
2Tap on [12Hr] or [24Hr] to select clock
mode.
Set time
1Tap [Time].

2Tap on the displayed time.
3Tap or to set hour and minute.
Use map
Note
You may need to upgrade the map (sold•
separately) before using it.
1In the main menu, tap [Navigation].
The navigation menu is displayed in a»
few seconds.
2See the map manual to operate the
navigation tool.
Listen to Radio
1Tap to display the home menu.
2Tap [Radio].
Band and frequency information is»
displayed.
3Tap on FM or AM to select band:
4 Brieytap or to tune to a radio station
by step.
Play disc 6
You can play video, audio or images stored on the
following discs:
DVD video, DVD-R, DVD-RW•
VCD•
Audio CD, CD-R, CD-RW•
1Insert a disc into the disc slot with the label
side facing up.
Play starts automatically.»
Connect USB device 7
1Open the USB/SDHC socket cover.
2Insert the USB storage device to the USB
socket.
Play starts automatically.»
Insert SD/MMC card 8
1Open the USB/SDHC socket cover.
2Insert the SD/MMC card into the card slot.
Play starts automatically.»
Make a call
1Pair the phone with the unit.
2Tap to display the home menu.
3Tap [Bluetooth].
The Bluetooth menu is displayed.»
4Tap or to select the paired phone, then
tap .
5Tap or to search for phone number
from the following list:
• [Missed calls]
• [Received calls]
• [Dialed calls]
• [Phone book]
• [Sim phone book]
• [Local phone book]
Or tap to dial number directly, then tap to
dial.

Answer a call
By default, the in-car system answers all incoming
calls automatically.
1If there is incoming call, [Incoming call...]
ashesonthescreen.Speakintothe
Bluetooth microphone.
2When conversation ends, tap (red) to
terminate the call.

© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
CID3693_00_QSG_V1.0