Philips GoSure ADR730 User manual

User Manual
Automotive Driving Recorder
GoSure
ADR730

contents
1. Product overview.........................................................1
2. Quick start....................................................................2
3. GoSure ADR730 user interface....................................4
4. GoSure ADR730 system settings.................................5
4.1 Set date and time....................................5
4.2 Function setting.......................................6
5. Device operating instructions.......................................8
5.1 Device button icons.................................8
5.2 Recording video.......................................8
6. Additional functions.......................................................9
6.1 Driver fatigue alert....................................9
7. Technical specification................................................10

1. Suction cup holder
2. Micro USB port
3. Lens
4. Microphone
5. Speaker
6. Micro SD card slot
7. Emergency/Return button
8. Up button
9. Enter button(OK)
10. Down button
11. Status indicator
Product Overview / Device display1
Bracket with suction cup
mount x 1
6
7
8
9
10
11
1
2
3
4
5
Charger x 1
1

Insert SD Memory Card
Insert the memory card with the golden contacts side of the card
facing the front of the camera.
About the Micro SD card
1. Please use a Micro SD card with a capacity of at least 16GB,
Class 10 (maximum 64GB).
2. Format your Micro SD card before first use by selecting
“format SD card” in the system settings of your GoSure device.
3. The relationship between card capacity and recording time is given
below.
Quick Start2
Micro SD card
Capacity
16GB
1080P/30fps
160 minutes
320 minutes
640 minutes
260 minutes
520 minutes
1040 minutes
720P/30fps
32GB
64GB
2

3
1. Install the suction cup
bracket onto the device.
2. Find a suitable position on
your windshield and lock
the suction cup.
3. Adjust the position of the
device within the mount to
ensure you’re recording
a clear view of the road.
4. Connect the USB cable to
the Micro USB socket of
the device.
5. Plug the other end of this
car charger into the socket
of your vehicle's cigarette
lighter.(running the wire
under the glove box and
around the edge of the
windshield).
6. Now your Philips GoSure will
automatically turn on when you
start your engine and will stop
recording when you turn it off
again.
Note:
1. Please use our dedicated car
charger to avoid any device
incompatibility issues.
3. To avoid damaging the video,
please unplug your car charger
before inserting or removing
your SD memory card.
4. To remove the SD card, simply
press down on the card and it
will eject from the card slot
automatically.
2. If the car power supply does not
turn off automatically, it is
recommended that you
disconnect the device’s charger
manually, to avoid draining your
car’s battery.

4
GoSure ADR730 User interface3
02:03:01
ISO 200 2018/04/03 16:03:01
50
123 4 5
7
8
9
10
11
No. description
1 Recording/Stop indicator
2 Resolution indicator
6
3 WDR(Wide dynamic range) indicator
4 Voice recording ON/OFF indicator
5 Headlamp-on reminder indicator
6 Emergency recording indicator
7 Recording time
8 Time stamp
9 Date
10 ISO values
11 Fatigue index

GoSure ADR730 system settings4
Press the OK button to open the menu list, allowing you
to adjust various device settings.
4.1 Set the Date and Time
1. Press
2. Press ▲/▼ to select clock icon and then press
OK to enter date and time setting page.
3. To adjust date and time field, press ▲/▼ to select
the field.
4. Press ▲/▼ to select the value.
5. Repeat steps 3-4 to adjust other fields.
6. Press to save your changes.
OK to open the on-screen display menu.
5

4.2 Function settings
No. Function Menu
Icon Description
1
2
video
Resolution
operate normal and emergency video files, users can play,
pause, delete, lock and unlock the video files
Set the video resolution to Full HD 1080P(FHD),
HD Premium(HD+).
3video time
WDR (Wide
Dynamic
Range)
Set video clip time to 1 minutes, 3 minutes, 5 minutes.
4
Switch on/off WDR function.
Collision
Detection
5Select the sensitivity level of collision detection to high /
middle /low /off.
Date/
Time
6Set date and time for the device
LCD Auto
Off
7Set the time before the LCD is turned off automatically, or
set the LCD always on/off.
Format8 Format your Micro SD Card.
Language9 Chinese, English are available for selection.
Voice
Recording
10 Switch on/off voice recording function.
EV Value
11 Manually adjust the exposure value.
Date
stamp
12 Switch on/off the date and time marking on the video.
Headlamp
-on reminder
13 Switch on/off the headlamp-on reminder function.
Motion
Detection
14 Select "ON" to trigger motion detection function. It will
detect moving object in the camera's field of view.When any
movement is detected, the 20 seconds recording starts
immediately.
Driver
Fatigue
Alert
15 Switch on/off driver fatigue alert function.
6

No. Function Menu
Icon Description
16
17
Default
About
Reset all device settings to factory default ones.
Firmware version, and other related product information.
18 Return Return to the video interface
7

Operating instructions5
5.1 Device button icons：
·button：Emergency button/Return button
·▲ button：Up button
·OK button：Enter button
·▼ button：Down button/Voice recording on/off button
5.2 Record video：
5.2.1 Normal video recording
With a MicroSD memory card inserted, every time you turn
on the device, it will automatically start recording. When
you switch your vehicle engine off, the camera will stop
recording automatically. A normal video recording file is
saved in the “NORMAL”folder. The file name is the
system time (hour, minute, second) as a prefix.
5.2.2 Emergency video recording
An emergency file will be automatically generated when you
either press the emergency button or the device
detects a collision above a certain force threshold. This file
will be stored in the “EMGREC” folder.
8