Phocos CXup Series Installation guide

Phocos Americas Inc.
Page 1
FAQ: CXup Load Settings
Contents
1.0 Buttons...........................................................................................................................................................................................1
2.0 Enter Settings Menu ..............................................................................................................................................................2
3.0 Dusk to Dawn (D2D)..............................................................................................................................................................3
4.0 Load on for 30 Minutes After Dusk...............................................................................................................................4
1.1 Buttons
1. ESC
2. DOWN
3. UP
4. SET

Phocos Americas Inc.
Page 2
FAQ: CXup Load Settings
1.2 Enter Settings Menu
Press ESC to enter the main menu. Use the UP or DOWN arrow key to navigate between
datalogging (LOG) and settings (Set) menus.
When the LCD shows Set, select the settings menu by pressing the SET button.
Use the UP or DOWN arrow key to navigate the settings submenus.

Phocos Americas Inc.
Page 3
FAQ: CXup Load Settings
1.3 Dusk to Dawn (D2D)
After entering the settings menu, use the UP or DOWN arrow key until the LCD shows the
nightlight submenu (NL). Press SET to enter the nightlight submenu.
Use the UP or DOWN arrow key to navigate the nightlight submenu. The previously selected
setting will flash.
When the LCD shows the D2D setting, press SET to save the setting. The D2D setting will flash
briefly to confirm the selection.
The LCD should automatically display NL again.
Press ESC exit the settings menu. Press ESC again to return to the status display.

Phocos Americas Inc.
Page 4
FAQ: CXup Load Settings
1.4 Load on for 30 Minutes After Dusk
After entering the settings menu, use the UP or DOWN arrow key until the LCD shows the
nightlight submenu (NL). Press SET to enter the nightlight submenu.
Use the UP or DOWN arrow key to navigate the nightlight submenu. The previously selected
setting will flash.
When the LCD shows the DD setting, press SET to save the setting. The DD setting will flash briefly
to confirm the selection.
The LCD should automatically display NL again.

Phocos Americas Inc.
Page 5
FAQ: CXup Load Settings
Use the UP or DOWN arrow key until the LCD shows the evening submenu (Eve). Press SET to
enter the evening submenu.
Use the UP or DOWN arrow key until the LCD shows 0.5.
When the LCD shows the 0.5 setting, press SET to save the setting. The 0.5 setting will flash briefly
to confirm the selection.
The LCD should automatically display Eve again.
Use the UP or DOWN arrow key until the LCD shows the morning submenu (Mor). Press SET to
enter the morning submenu.

Phocos Americas Inc.
Page 6
FAQ: CXup Load Settings
Use the UP or DOWN arrow key until the LCD shows 0.0.
When the LCD shows the 0.0 setting, press SET to save the setting. The 0.0 setting will flash briefly
to confirm the selection.
The LCD should automatically display Mor again.
Press ESC exit the settings menu. Press ESC again to return to the status display.

Phocos Americas Inc.
Page 7
FAQ: CXup Load Settings
Document Version
Date
Revision
Description
Author
2018-01-18
1.0
Initial version with D2D, 0.5 hr after dusk
Megan Cornman