Pitney Bowes SendPro Network SendKit User manual

Right, let’s get your SendKit up
and running quickly…
Let’s rst get together the things you will need:
• The box containing your SendPro®Network SendKit.
• A Welcome Email from Pitney Bowes containing your SendPro®
Log in details.
• A Mac on which you have full admin rights to allow downloading
and installing software.
• 1 available USB ports on your Mac.
If you have not received the email from Pitney Bowes, do not go
any further with this installation. Please visit pitneybowes.com for
contact details for your market.
Continue reading below
SendPro®Network SendKit
Read Now BEFORE you unpack your equipment
MAC Installation Instruction
Network Printer Connection

1. Opening the box and unpacking.
3. Downloading the scale utility.
2. Signing into SendPro®.
Scale Printer
USB
(not used
for network
installation)
Power Cord
Network Cable
sendpro.pitneybowes.com
Here’s a diagram and explanation of the items you should
nd in your box.
If you have any problems during this installation, refer to
‘Troubleshooting’.
Sign into SendPro® using the link in the welcome email.
Now you are signed into SendPro® Click on the Help icon.
Select Download SendPro® Scale Utility for macOS. This
can also be downloaded from the App store by searching for
SendPro.
Follow the prompts on screen to install.

4. Connecting your scale.
5. Connecting the printer.
Connecto your Network cable to your printer and Network
socket.
Connect the power cord and adapter to your printer
(as shown) and switch on.
Note: If you do not wish to use a USB to connect your scale
refer to the online help for information on battery installation.
6. Printer ready.
7. Aligning the label roll.
Place your scale on a rm and at surface near to your
computer.
Connect your scale to your computer using the USB cable
supplied. Then press the Zero button.
Hold Mode Zero
Wait for approximately 45 seconds until the green
light remains constant and the printer is ready.
Press the button and check that the label feeds out correctly.
Note: If the label does not feed correctly please refer to label
alignment instructions inside the printer top cover.
Tear o the correctly dispensed label.
Network Cable Power Cable

9. Downloading the printer driver.
1. Ensure you are signed into SendPro® and click on the
Help icon.
2. Select the Datamax Printer Driver.
3. Select to download the correct printer driver for your
operating system.
4. Double click on the Gutenprint 5.2.12-pre4.dmg le.
5. Open gutenprint-5.2.12.pkg.
6. Select Continue.
7. Select Install.
8. The installer will prompt you for your Mac administrative
login. Enter your administrator username and password
and select Install Software.
9. When complete, it will say The installation was
successful. Select Close.
10. Select System Preferences from the Apple menu.
11. Open Printers & Scanners.
12. Select the plus sign + to add a printer.
13. At the top of the window, select IP.
14. In the Address eld, enter the IP address of the w1110
printer you identied earlier.
15. From the Protocol menu, select HP Jetdirect – Socket.
16. Leave the Queue eld blank.
17. (Optional) To rename the printer, enter the desired name in
the Name eld.
18. From the Use menu, choose Select Software.
19. In the search eld, enter w1110.
20. Select Datamax-ONeil w1110 - CUPS+Gutenprint
v5.2.12 and select OK.
21. Select Add.
8. Printing a system report.
Print the System Report to obtain the IP address assigned to
the label printer.
1. To print the system report simultaneously press the button
on the front of the label printer and the recessed button
on the back of the printer with a suitable object such as a
pencil or similar.
2. Keep the printed report that will be needed later in the
installation process.
System Report
...
Ethernet IP
Ethernet MAC
Ethernet DHCP
Hostname
When printing shipping labels on the w1110 printer:
• In the Safari printer dialog box, you must select the Chose
paper source by PDF page size box before printing.
• In the Adobe PDF printer dialog box, you must select 4x6
in label from the Paper Size menu.

*AW32619reva*
3001 Summer St.
Stamford, CT 06926
www.pitneybowes.com
AW32619 Rev. A 04/18
©2018 Pitney Bowes Inc.
All Rights Reserved
If you’re still having trouble, then visit
www.pitneybowes.com
and select Support.
Now let’s get shipping!
You can access in-depth Online Help that covers all operator and
feature aspects of your SendPro® software and SendKit in detail.
To access this information, press the Help ( ) icon from your App.
and select See More Help Topics. But for your convenience, we’ve
included links to most commonly needed support to get you started.
Creating a label
How to print a shipping label in
SendPro
Managing Sendpro users
How to view your history in
SendPro
Click Here
Click Here
Click Here
Click Here
Click Here
Carrier Services and Packaging
For information about size and weight restrictions, visit the carrier’s
website:
USPS
UPS
FedEx
Note: Available carriers dependent on Sendpro subscription.
How to change your username,
password, and account name for
SendPro