Planet SIP IP PHONE VIP-154PT User manual

SIP IP Phone
VIP-154T/VIP-154PT/VIP-154NT
User’s manual
Version 2.2
1

Copyright
Copyright (C) 2008 PLANET Technology Corp. All rights reserved.
The products and programs described in this User’s Manual are licensed products of PLANET Technology, This
User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all
accompanying hardware, software, and documentation are copyrighted.
No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic
medium or machine-readable form by any means by electronic or mechanical. Including photocopying, recording,
or information storage and retrieval systems, for any purpose other than the purchaser's personal use, and without
the prior express written permission of PLANET Technology.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments and applications,
and makes no warranty and representation, either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any
inaccuracies or omissions that may have occurred.
Information in this User’s Manual is subject to change without notice and does not represent a commitment on the
part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s
Manual. PLANET makes no commitment to update or keep current the information in this User’s Manual, and
reserves the right to make improvements to this User’s Manual and/or to the products described in this User’s
Manual, at any time without notice.
If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your
comments and suggestions.
CE mark Warning
The is a class B device, In a domestic environment, this product may cause radio interference, in which case the
user may be required to take adequate measures.
WEEE Warning
To avoid the potential effects on the environment and human health as a result of the presence of
hazardous substances in electrical and electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of
WEEE as unsorted municipal waste and have to collect such WEEE separately.
Trademarks
The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware
and software products by their trade names. In most, if not all cases, their respective companies claim these
designations as trademarks or registered trademarks.
2

3
Revision
User’s Manual for PLANET SIP IP Phone:
Model: VIP-154T/VIP-154PT/VIP-154NT
Rev: 2.2 (2008, February)
Part No. EM-VIP154V2.2

4
TABLE OF CONTENTS
Chapter 1................................................................................................ 6
Introduction............................................................................................ 6
Overview............................................................................................................................6
Package Content...............................................................................................................8
Physical Details.................................................................................................................8
Rear View ...................................................................................................................8
Front View and Keypad function..............................................................................10
Chapter 2 Preparations & Installation................................................ 12
Physical Installation Requirement................................................................................12
LAN IP address configuration via web configuration interface...............................13
Chapter 3 Network Service Configurations....................................... 15
Configuring and monitoring your IPPhone from web browser................................15
Overview on the web interface of IP Phone.............................................................15
Manipulation of IP Phone via web browser .............................................................15
Chapter 4 VoIP Telephone Adapter Configurations.......................... 17
Phone Book settings .................................................................................................17
Speed Dial settings...................................................................................................19
Call Forward.............................................................................................................20
SNTP settings ...........................................................................................................21
Volume Setting .........................................................................................................22
Ringer Setting...........................................................................................................23
Block Setting ............................................................................................................23
Auto Answer settings (For VIP-154NT) ..................................................................24
Dial Plan Settings.....................................................................................................24
Flash Time Setting (For VIP-154NT).......................................................................27
Call waiting Settings.................................................................................................27
Voice Mail Settings...................................................................................................28
Hot line Settings.......................................................................................................28
Alarm Settings..........................................................................................................29
LAN Settings............................................................................................................29
PC Settings ...............................................................................................................30
DDNS Settings .........................................................................................................31
VLAN Settings.........................................................................................................32
DMZ Settings ...........................................................................................................32
Virtual Server............................................................................................................33
PPTP Settings ...........................................................................................................34
Service Domain Settings ..........................................................................................35

5
Port Settings..............................................................................................................36
Codec Settings..........................................................................................................36
Codec ID Setting ......................................................................................................37
DTMF Settings.........................................................................................................38
RPort Settings...........................................................................................................38
Other Settings...........................................................................................................38
STUN settings ..........................................................................................................39
Auto Configuration...................................................................................................40
PTT Settings (For VIP-154NT)................................................................................40
Cancel without to tag................................................................................................40
MAC CIone Setting..................................................................................................41
Tone Settings ............................................................................................................42
Advanced Settings....................................................................................................43
System Authority......................................................................................................44
Save & Reboot..........................................................................................................44
Firmware Upgrade....................................................................................................45
Auto Upgrade ...........................................................................................................45
Reset to Default........................................................................................................47
Reboot without saving..............................................................................................47
Appendix A Voice communications...............................................................................49
Case 1: Voice communication via IP PBX system _ IPX-2000 (Auto-config) ........49
Case 2: VIP-154T to VIP-154T connection via IP address......................................52
Case 3: Voice communication via SIP proxy server _SIP-50...................................53
Case 4: Call Forward Feature_Example 1................................................................54
Case 5: Call Forward Feature_Example 2................................................................56
Case 6: Call Forward Feature_Example 3................................................................57
Case 7: Call Forward Feature_Example 4................................................................59
Case 8: Auto Answer Feature_IP to PSTN...............................................................60
Case 9: Auto Answer Feature_PSTN to IP...............................................................62
Appendix B The method of operation guide................................................................64
Call Transfer.............................................................................................................64
3-Way Conference....................................................................................................64
Call Waiting..............................................................................................................64
Switch the Realm (Registration Proxy Server) ........................................................64
Appendix C VIP-154T / VIP-154PT / VIP-154NT Specifications..............................66

6
Chapter 1
1
Introduction
Overview
Meeting the next-generation Internet telephony service demands, PLANET Technology provides
feature-rich, toll-quality Internet telephony service solutions. The built-in PSTN interface provides user
more convenience between IP Phone and PSTN call selections. －VIP-154NT. With 802.3af Power
over Ethernet (PoE) IP Phone－VIP-154PT. And the VIP-154T is the cost-effective SIP IP Phone; the
VIP-154 series are SIP 2.0 (RFC3261) compliant with SIP digest authentication supports.
The VIP-154T / VIP-154PT / VIP-154NT ("IP Phone" in the following term) features high-quality
speakerphone technology, and includes an easy-to-use speaker on/off button and call hold/transfer
buttons for various voice services.
The IP Phone has additional features such as built-in PPPoE/DHCP clients, password-protected
machine management, LCD menu display, speed-dial 3-way conference keys, hands-free
speakerphone, last number redial, incoming message indicator, and user-intuitive web administration
system.
The IP Phone is self-contained, service-integrated, intelligent phone features offering, and powerful
voice processing power. The IP Phone can effortlessly deliver toll voice quality equivalent to the regular
PSTN connections utilizing cutting-edge Quality of Service, echo cancellation, comfort noise generation
(CNG) and voice compensation technology. Meanwhile, the dual Ethernet interfaces on the IP Phone
allow users to install in an existing network location without interfering with desktop PC network
connections. When installing the VIP-154T / VIP-154PT / VIP-154NT, SIP IP Phone with IPX-2000
(PLANET IP PBX system), the VIP-154 series IP phones can be easily integrated in your office; via the
auto-config support for IPX-2000. No expertise required building up the VoIP network deployment.
Besides, the IP Phones are ideal solution for office / home use as well as installation for Internet
Telephony Service Provider (ITSP) from leading vendors. It's the delivery platform for IP voice services
that makes benefit from the VoIP technologies in your daily life.
There are models for VIP-154T/VIP-154PT/VIP-154NT and there are:
VIP-154T: SIP IP Phone
VIP-154PT: 802.3af PoE SIP IP Phone
VIP-154NT: 1 FXO SIP IP Phone
Product Features
•Built-in PSTN (VIP-154NT)
The built-in PSTN interface provides user more convenience between IP Phone and PSTN call
selections easily
•Simple Installation and administration

7
Configuration of the IP Phone can be performed in minutes via the LCD menu keypad, telnet, or
web interfaces. Using the built-in LCD display, the IP Phone offers user-friendly configuration
guidelines, machine operation status, call status displays, and incoming call identification.
•IP PBX system integration
Via auto-config support for IPX-2000, no expertise required to establish your office voice network.
VIP-154 series can help you to complete VoIP network deployment in minutes.
•Feature-rich keypad IP Phone
The IP Phone integrates a high-quality speakerphone with the Call Hold, Forward, Transfer and
Waiting functions and also provides advanced telephone features, such as 4 speed-dial keys,
3-way conference key, last number redial, incoming call history indicator in a much more
convenient and functional manner than traditional telephone sets.
•Dynamic IP address assignment, and voice communication
The IP Phone can act as a PPPoE/DHCP client, automatically obtaining an IP address for Internet
access.
•Various field applications compliant
The IP Phone is capable of handling peer-to-peer and SIP proxy / IP PBX registration,
authentication to interact with major IP PBX/SIP gateway/IP Phone in the market. The IP Phone
offers the most flexibility and interoperability with PLANET and 3rd party VoIP vendors, allowing the
deployment of both simple and complex VoIP networks such as ITSP, PC-to-Phone/Phone-to-PC
or enterprise VoIP environments.
•Standards compliant
The VIP-154T / VIP-154PT / VIP-154NT complies with SIP 2.0 (RFC3261), interoperates with 3rd
party SIP voice gateways/terminal/software as well as other PLANET VoIP products. Supported
Voice codecs and VoIP technologies are: G.723, G.729ab, G.711u-law/a-law; Voice Activity
Detection (VAD), and the Confort Noise Generation (CNG).
VoIP Features
•SIP 2.0 (RFC3261) compliant
•Peer-to-Peer / SIP proxy calls
•Voice codec support: G.711, G.723.1, G.726, G.729A, G.729B
•Voice processing: Voice Active Detection, DTMF detection/ generation, G.168 echo cancellation
(16mSec.), Comfort noise generation
•In band and out-of-band DTMF support

Package Content
The contents of your product should contain the following items:
VoIP IP Phone
Power adapter
Quick Installation Guide
User’s Manual CD
RJ-11 cable x 1
Physical Details
The following figure illustrates the front/rear panel of IP Phone.
Rear View
Rear Panel of VIP-154T
Rear Panel of VIP-154PT
8

Rear Panel of VIP-154NT
1 RESET
Reset to the factory default setting
2 PC RJ-45 connector, to maintain the existing network structure,
connected directly to the PC through straight CAT-5 cable
3 LAN
RJ-45 connector, for Internet access, connected directly to
Switch/Hub through straight CAT-5 cable.
The LAN interface also can be connected with 802.3af PoE
switch or converter for power supply (VIP-154PT)
4 12V DC 12V DC Power input outlet
5 LINE
FXO interface, for connect with PSTN line. Press 0* to switch
to PSTN mode. (VIP-154NT only)
1. IP Phone default IP is http://192.168.0.1. Press RESET
button on rear panel over 5 seconds will reset the VoIP
IP Phone to factory default value. (Except speed dial
and call forward settings)
2. For VIP-154PT, either PoE or AC adapter can be deployed
at one time
LNote
9

Front View and Keypad function
Keypad Description
1 LCD Display
Menu and all status shall be displayed for users.
2 Speed Dial
M1~M4
To make a speed dial call by pressing the speed dial key M1 ~
M4.
3 MENU
To bring out the menu selection while IP Phone is in idle state.
4 Vol +/↑ To increase the volume of voice when at off-hooked state.
To page up menu when at configuration mode.
5 Vol - /↓To decrease the volume of voice when at off-hooked state.
To page down menu when at configuration mode.
6 OK
To be used as confirm configuration or enter sub-menu.
7 Phone Book
Enter the phone book selection.
8 MESSAGE
Press this button can enter the voicemail service.
10

11
9 TRANSFER
To transfer an active call (incoming call answered or outgoing
call accepted) to another devices.
10 CONF
Press this button can make conference function.
11 FWD
To carry out forward function.
12 DEL/MUTE
Press to delete digits when at configuration mode or input
phone numbers.
Press to mute sounds when at talk mode.
13 Redial
Press to dial the last dialed number when the IP Phone is
off-hooked.
14 Handfree
To switch between the usage of the handset and the speaker
devices.
15 Hold
To hold the conversation.
16 Call Log
Show the calls history.

2
Chapter 2
Preparations & Installation
Physical Installation Requirement
This chapter illustrates basic installation of IP Phone
•Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
•TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem
Administration Interface
PLANET IP Phone provides GUI (Web based, Graphical User Interface) for machine management and
administration.
Web configuration access
To start IP Phone web configuration, you must have one of these web browsers installed on computer
for management
•Microsoft Internet Explorer 4.01 or higher with Java support
Default IP address of IP Phone is 192.168.0.1. You may now open your web browser, and insert
http://192.168.0.1 in the address bar of your web browser to logon IP Phone web configuration page.
IP Phone will prompt for logon username/password, please enter: root / null (no password) to continue
machine administration.
12

LNote In order to connect machine for administration, please
locate your PC in the same network segment (192.168.0.x)
of IP Phone. If you’re not familiar with TCP/IP, please refer
to related chapter on user’s manual CD or consult your
network administrator for proper network configurations.
LAN IP address configuration via web configuration interface
Execute your web browser, and insert the IP address (default: 192.168.0.1) of VIP in the adddress bar.
After logging on machine with username/password (default: root / no passwrd), browse to “Network”
--> “LAN Settings” configuration menu:
Parameter Description
IP address LAN IP address of IP Phone
Default: 192.168.0.1
Subnet Mask LAN mask of IP Phone
Default: 255.255.255.0
Default Gateway Gateway of
IP Phone
Default: 192.168.0.254
13

After confirming the modification you’ve done, Please click on the Submit button to apply settings and
browse to “Save & Reboot” menu to reboot the machine to make the settings effective.
Connection Type Data required.
Fixed IP In most circumstances, it is no need to configure the DHCP
settings.
DHCP clinet The ISP will assign IPAddress, and related information.
PPPoE The ISP will assign PPPoE username / password for Internet
access,
Please consult your ISP personnel to obtain proper PPPoE/IP
address related information, and input carefully.
If Internet connection cannot be established, please check
the physical connection or contact the ISP service staff
for support information.
LHint
Save Modification to Flash Memory
Most of the IP Phone parameters will take effective after you modify, but it is just temporary stored on
RAM only, it will disappear after your reboot or power off the IP PHone, to save the parameters into
Flash ROM and let it take effective forever, please remember to press the Save & Reboot button after
you modify the parameters.
14

3
Chapter 3
Network Service Configurations
Configuring and monitoring your IP Phone from web browser
The IP Phone integrates a web-based graphical user interface that can cover most configurations
and machine status monitoring. Via standard, web browser, you can configure and check machine
status from anywhere around the world.
Overview on the web interface of IP Phone
With web graphical user interface, you may have:
More comprehensive setting feels than traditional command line interface.
Provides user input data fields, check boxes, and for changing machine configuration settings
Displays machine running configuration
To start IP Phone web configuration, you must have one of these web browsers installed on computer
for management
Microsoft Internet Explorer 4.01 or higher with Java support
Manipulation of IP Phone via web browser
Log on IP Phone via web browser
After TCP/IP configurations on your PC, you may now open your web browser, and input
http://192.168.0.1 to logon IP Phone web configuration page.
IP Phone will prompt for logon username/password: root / null (not password)
IP Phone log in page
When users login the web page, users can see the IP Phone system information like firmware version,
company…etc in this main page.
15

IP Phone main page
16

Chapter 4
VoIP Telephone Adapter Configurations
17
Phone Book settings
IP Phone can set up 140 records of Phone Book. User can make calls via Phone Book feature of IP
Phone.
Field Description
Phone Book Page The default is Page 1. It can select Page1 ~ Page 14
to look round Phone Book records.
Phone The record number from 0 ~ 139, it can set up 140
records in total.
Name The name of Phone Book records, it only can input
numerals.
URL Fill in the outgoing number (Line Number) or IP
address.
Select To select this record.
4

If you need to add a phone number into the Phone Book list, you need to input the position, the name,
and the phone number (by URL type). When you finished a new phone list, just click the “Add Phone”
button.
If you want to delete a phone number, you can select the phone number you want to delete then click
“Delete Selected” button.
If you want to delete all phone numbers, you can click “Delete All” button.
For Example:
STEP 1:
IP Phone had added the above phone numbers. User press Phone Book button from keypad
then the LCD screen will show below:
Search: [ 3]
STEP 2:
Press OK button to enter the Phone Book menu. The LCD screen will show the Phone Book
records pervious made.
00 202
01 206
STEP 3:
Selecting the recorder you want to dial and press OK button. It sill show the detail information as
below:
18

202
192.168.1.2:5062
STEP 4:
Pick up the telephone handset or press Handfree button to dial to this telephone.
IP Dialing.. 1
192.168.1.2:5062
Speed Dial settings
In Speed Dial setting function you can add/delete Speed Dial number. You can input maximum 10
entries speed dial list. You can setup the Speed Dial number. If you want to use Speed Dial you just dial
the speed dial number (from 0~9) and follow the “#” key.
If you need to add a phone number into the Speed Dial list, you need to input the position, the name,
and the phone number (by URL type). When you finished a new phone list, just click the “Add Phone”
button.
If you want to delete a phone number, you can select the phone number you want to delete then click
“Delete Selected” button.
If you want to delete all phone numbers, you can click “Delete All” button.
19

Call Forward
This page defines Call Forward function. You can setup the phone number you want to forward in this
page. There are three type of Forward mode. You can choose All Forward, Busy Forward, and No
Answer Forward by click the icon.
All Forward: All incoming call will forward to the number you chosen. You can input the name and the
phone number in URLfield. If you select this function, then all the incoming call will direct forward to the
speed dial number you choose.
Busy Forward: If you are on the phone, the new incoming call will forward to the number you choosed.
You can input the name and the phone number in URL field.
No Answer Forward: If you can not answer the phone, the incoming call will forward to the number you
chosen. You can input the name and the phone number in URL field. Also you have to set the Time Out
time for system to start to forward the call to the number you choosed.
When you finished the setting, please click the Submit button.
20