Planet FSD-804P User manual

Trademarks
Copyright  PLANET Technology Corp. 2005.
Contents subject to which revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trade-
marks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in
all environments and applications, and makes no warranty and representa-
tion, either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate;
PLANET disclaims liability for any inaccuracies or omissions that may have
occurred.
Information in this User’s Manual is subject to change without notice and does
not represent a commitment on the part of PLANET. PLANET assumes no re-
sponsibility for any inaccuracies that may be contained in this User’s Manual.
PLANET makes no commitment to update or keep current the information
in this User’s Manual, and reserves the right to make improvements to this
User’s Manual and/or to the products described in this User’s Manual, at any
time without notice.
If you find information in this manual that is incorrect, misleading, or incom-
plete, we would appreciate your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the Instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at whose own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.

WEEE Warning
To avoid the potential effects on the environment and human health
as a result of the presence of hazardous substances in electrical and
electronic equipment, end users of electrical and electronic equipment
should understand the meaning of the crossed-out wheeled bin symbol.
Do not dispose of WEEE as unsorted municipal waste and have to col-
lect such WEEE separately.
Revision
PLANET Fast Ethernet Switch with 802.3af injector built-in User’s Manual
FOR MODEL: FSD-804P
Rev: 1.0
Part No. 2010-A31110-000

Table of Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 How to Use This Manual 1
1.3 Product Features 2
1.4 Product Specifications 3
Chapter 2 Installation 5
2.1 Product Description 5
2.2 Installing a FSD-804P 6
Chapter 3 Switch Operation
3.1 Address Table 7
3.2 Learning 7
3.3 Forwarding & Filtering 7
3.4 Store-and-Forward 7
3.5 Auto-Negotiation 8
Chapter 4 Trouble Shooting 9
APPENDIX A 10
A.1 Switch‘s RJ-45 Pin Assignments 10
A.2 10/100Mbps, 10/100Base-TX 10

1
Chapter 1
INTRODUCTION
1.1 Package Contents
Open the box of the Switch and unpack it carefully. The box should contain the following
items:
● The Switch
● Power Cord x 1
● User s Manual x 1
If any item is found missing or damaged, please contact your local reseller for replacement.
Please retain the carton including the original packing material, and use them against to
repack the product in case there is a need to return it to us for repair.
1.2 How to Use This Manual
This Ethernet Switch User Manual is structured as follows:
Chapter 2 Installation
This chapter explains the functions and how to physically install the FSD-804P.
Chapter 3 Switch Operation
This chapter explains the switch operation of FSD-804P.
Chapter 4 Trouble Shooting
This chapter contains troubleshooting of FSD-804P
Appendices
This chapter contains cable information of FSD-804P.
1.3 Product Features
● 8-Port 10/100Mbps Fast Ethernet ports
● 4-Port support 48VDC PoE power to IEEE802.3af compliant Powered Device
● Hardware based 10/100Mbps auto-negotiation
● Flow control for full duplex operation and back pressure for half duplex opera-
tion
● Integrated address look-up engine, support 2K absolute MAC addresses

2
● Automatic address learning and address aging
● Supports Auto MDI/MDI-X function
● LED indicators for easy network diagnostic
● Comply with IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet, IEEE802.3x Flow
Control and IEEE802.3af Power over Ethernet
● EMI standards comply with FCC, CE class B

3
1.4 Product Specifications
Model FSD-804P
Hardware Specification
Network ports 8-Port RJ-45 for 10/100TX
4-Port with PoE injector function
LED Display One power, 1-4 port PoE in-use, LNK/ACT, 100
5-8 port LNK/ACT, 100
PoE RJ-45 Pin polarity 4/5: Positive; 7/8: Negative
Switch architecture Store and forward switch architecture. Back-plan up
to 1.6Gbps
MAC address 2K MAC address table with Auto learning function
Remote power feeding End-point insert type and compatible with
IEEE802.3af
Per port feeding power 15.4Watts (maximum)
Power Supply Embedded AC power supply: AC 100~240V, 50/60Hz,
45 watts power consumption
Operating Temperature 0~50˚C
Storage Temperature -40~70˚C
Humidity 10% to 90% (Non-condensing)
Dimension 217mm(W) x 135mm(D) x 43mm(H)
EMI FCC Class B, CE
Standard Compliance IEEE802.3 Ethernet,
IEEE802.3u Fast Ethernet,
IEEE802.3x Flow Control
IEEE802.3af Power over Ethernet.

4
Chapter 2
INSTALLATION
This chapter describes the functionalities of FSD-804P’s components and guides how to
install it on the desktop or shelf. Basic knowledge of networking is assumed. Please read
this chapter completely before continuing.
2.1 Product Description
For cost saving and flexible using of PoE power provision, half of the 10/100Mbps TP ports
of FSD-804P provide PoE power injector function which is able to drive 4 IEEE802.3af
compliant powered devices.
For SOHO or department network, the switches also provide a Simple and cost-effective,
highly reliable network connection. And is the ideal device for bridging Ethernet to Fast
Ethernet workgroups or networks. Therefore, the switch will be the fast being recognized
as one of the most important building blocks for today networking technology.
Solidly built in small size that is easy to position when space is at a premium. Ideal for
conference rooms, class rooms, study groups or small offices. Place it on any flat surface
or use the included wall mount kit to tuck it out of the way.
2.1.1 Product Application
Department/ Workgroup PoE Switch:
Providing up to 4 PoE, in-line power interface, the switch can easily build a power central-
controlled IP phone system, IP Camera system, AP group for the enterprise. For instance,
4 camera / AP can be easily installed around the corner in the company for surveillance
demands or build a wireless roaming environment in the office.
Without the power-socket limitation, the switch makes the installation of cameras or
WLAN AP more easily and efficiently.
2.1.2 FSD-804P Front Panel
Figure 2-1 shows the front panel of FSD-804P
Figure 2-1 The front panel of FSD-804P

5
2.1.3 LED Indicators
LED Color Function
PWR Green Light: Power on
PoE in use Green Light: The port is providing 48VDC power
LNK/ACT Green Light: The port is successfully established
Blink: The port is actively receiving or sending the
data
100 Green Light: The port is operating at 100Mbps speed
2.1.4 FSD-804P rear panel
The rear panel of the Switch indicates an AC inlet power socket, which accepts input
power from 100 to 240VAC, 50/60Hz.
Figure 2-2 Rear Panel of FSD-804P
Power Notice:
1. The device is a power-required device, it means, it will not work till it is pow-
ered. If your networks should active all the time, please consider using UPS
(Uninterrupted Power Supply) for your device. It will prevent you from network
data loss or network downtime.
2. In some area, installing a surge suppression device may also help to protect
your switch from being damaged by unregulated surge or current to the Switch
or the power adapter.
2.2 Installing a FSD-804P
This part describes how to install your FSD-804P Fast Ethernet Switch and make
connections to the switch. Please read the following topics and perform the procedures in
the order being presented.
PLANET FSD-804P Fast Ethernet Switch do not need software configuration. To install your
FSD-804P on a desktop or shelf, simply complete the following steps.
2.2.1 Desktop Installation
To install a FSD-804P on a desktop or shelf, simply complete the following steps:
Step1: Attach the rubber feet to the recessed areas on the bottom of the switch.
Step2: Place the FSD-804P on a desktop or shelf near an AC power source.

6
NOTE:
Optional rack-ear for 10-inch cabinet rack mounting (RKE-10A)
and 19-inch cabinet rack mounting (RKE-10B) is available upon
request.
Step3: Keep enough ventilation space between the switch and the surrounding objects
NOTE:
When choosing a location, please keep in mind the environ-
mental restrictions discussed in Chapter 1, Section 4, Product
Specification.
Step4: Connect your FSD-804P to network devices
A. Connect one end of a standard network cable to the 10/100 RJ-45 ports on the
front of the FSD-804P.
B. Connect the other end of the cable to the network devices such as printer serv-
ers, workstations or routers etc.
NOTE:
Connection to the Switch requires UTP Category 5 network
cabling with RJ-45 tips. Please see the Appendex A for more
information.
Step5: Supply power to the Switch.
A. Connect one end of the power cable to the FSD-804P
B. Connect the power plug of the power cable to a standard wall outlet.
When the FSD-804P receives power, the Power LED should remain solid Green.
2.3 Installing Powered Devices
The FSD-804P is able to support power to 4 IEEE802.3af compliant powered devices.
When the powered device is connected to the FSD-804P by an Ethernet cable at the first
4 ports, the FSD-804P automatically detect the device and check if it is compliant with
IEEE80.23af standard. Then run the power provision process to provide power.