Planet WS-1032P User manual

Wireless AP Managed Switch
with 10/100/1000Mbps 802.3at PoE+
WS-1032P/WS-2864PVR
Quick Installation Guide

Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Starting Web Management .......................................................................... 5
3.1 Logging to the Web UI......................................................................... 5
3.2 Function Icons..................................................................................... 7
4. Starting AP Management ............................................................................. 8
5. Terminal Setup ..........................................................................................10
5.1 Logging on to the Console...................................................................11
 5.2 ConguringIPAddress........................................................................12
6. RecoveringBacktoDefaultConguration.....................................................15
7. Customer Support .....................................................................................16

3
1. Package Contents
Thank you for purchasing PLANET Wireless AP Managed Switch with
10/100/1000Mbps 802.3at PoE+.
ModelNo. PoE 10G SFP+ LCD
WS-1032P 8 ports 2 ports No
WS-2864PVR 24 ports 4 ports Yes
The Wireless AP Managed Switch includes an AP Controller feature. The AP
Controller mentioned in this Quick Installation Guide refers to the Wireless AP
ManagedSwitch.
Open the box of the AP Managed Switch and carefully unpack it. The box should
containthefollowingitems:
zTheAPManagedSwitch
zQuickInstallationGuide
zRJ45 to RS232 Cable
zRubber Feet
zTwoRack-mountingBracketswithAttachmentScrews
zPowerCord
zSFP Dust-proof Caps
If any item is found missing or damaged, please contact your local reseller for
replacement.

4
2. Requirements
zWorkstations running Windows 10/XP/2003/Vista/7/8/2008, MAC OS X or later,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
zSerialPortConnection(Terminal)
 The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
 The above Workstations have been installed with terminal emulator, such as
TeraTerm,PuTTYorHyperTerminalincludedinWindowsXP/2003.
 Serial cable -- one end is attached to the RS232 serial port, while the other
endtotheconsoleportoftheAPManagedSwitch.
zEthernet Port Connection
 Networkcables--Usestandardnetwork(UTP)cableswithRJ45connectors.
 The above PC is installed with Web browser and JAVA runtime environment
plug-in.

5
3. Starting Web Management
The following shows how to start up the Web Management of the AP Managed
Switch.Notethe APManaged Switchiscongured throughan Ethernetconnection.
Please make sure the manager PC must be set to the same IP subnet address.
For example, the default IP address of the AP Managed Switch is 192.168.1.100,
then the manager PC should be set to 192.168.1.X (where Xis a number
between1and254,except100),andthedefaultsubnetmaskis255.255.255.0.
PC / Workstation
with Web Browser
192.168.1.x
AP Managed Switch
RJ45/UTP Cable
IP Address: 192.168.1.100
Figure 3-1 IP Management Diagram
3.1 Logging to the Web UI
1.Use Chrome (recommended) or other Web browser to enter IP address
https://192.168.1.100 (the factory default IP address or the one that you
havejustchangedviatheconsole)toaccesstheWebinterface.
2.When the following dialog box appears, please enter the default user name and
password “admin” (or the password you have changed via the console). The
login screen in Figure 3-2 appears.
DefaultIPAddress:192.168.1.100
DefaultUsername:admin
DefaultPassword:admin
Figure 3-2 Login Screen

6
Note
It is recommended to use Google Chrome to access the AP
Managed Switch. If the Web interface of the AP Managed Switch
is not accessible, please turn off the anti-virus software or firewall
andthentryitagain.
3.Afterenteringthepassword,themainscreenappearsasFigure3-3shows.
Figure 3-3 Web Main Screen
The main menu on the top of the web page lets you access all the commands
and statistics the AP Managed Switch provides. The menu contains one or more
buttons, such as “AP Control”, “System”, “Switching”, “QoS”, “Security”,
“Maintenance”,“PoE”and“Ring”.
Figure 3-4 Main menu

7
The sub-menu on the left of the web page lets you access all the commands and
statisticstheAPManagedSwitchprovides.
Figure 3-5 Sub-menu of AP Control
Now,youcanuse the WebmanagementinterfacetocontinuetheAPmanagement.
Pleaserefertotheuser’smanualformoredetails.
3.2 Function Icons
The function icons on the upper-right corner of the web page lets you quickly
execute major system commands that include “Refresh”, “Save Conguration”,
“Help”and“Logout”.
Figure 3-6 Function Icons
Item Description
Refresh Click “Refresh”toupdatethecurrentpagecontent
Save
Conguration
Click “Save Conguration”tosaveallappliedchangesandset
thecurrentcongurationasastartupconguration
Help Click “Help”toshowthecontentdescriptionofthecurrentpage
Logout Click “Logout” to log out the system

8
4. Starting AP Management
There are dierent models including indoor and outdoor AP series that can be
managedbyAPManagedSwitch.
Note
Please regularly check PLANET website for the latest managed AP
compatibility list.
For the AP models that do not support DHCP IP, please congure them to use a
dierentstaticIPbeforeconnectingthemtothesamemanagednetwork.
If you prefer to use DHCP IP for the AP models that support DHCP IP, please
ensuretheDHCPserverexistsinthemanagednetwork.
Step 1. In the AP Managed Switch, go to “System-> DHCP Server-> Mode”
page to enable DHCP server and then go to “Maintenance-> Switch
Maintenance-> Save Startup Cong” to click “Save Conguration”.
Figure 4-1 DHCP Server
Figure 4-2 Save Conguration
Note
If you have configured the AP to static IP or the DHCP server is
already existed in the managed network, ignore this step and
continuetheAPmanagementaccordingtothefollowingsteps.

9
Step 2. Go to the “AP Search” page and then click “Search” to discover the
managedAP.
Step 3. In the “Select Device”eld,checktheAPandthenclick“Apply”.
Figure 4-3 AP Search
Step 4. Then, you can go to the “AP Management” page to congure the
general setting and designate the pre-dened proles to the managed AP
withoutloggingontotheAP’swebpage.
Figure 4-4 AP Management
For information about further conguration of the Managed AP by using AP
ManagedSwitch,refertotheusermanualoftheAPManagedSwitchmodels.
Step 5. The WS AP controller series must be assigned a gateway in the same
segmentnetwork.(default:192.168.1.254)
Figure 4-5 IP Conguration setting

10
5. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebookcomputerandtotheRJ45typeoftheconsoleportoftheAPController.
AP Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 5-1 AP Controller Console Connectivity
A terminal program is required to make the software connection to the AP
Controller.
1. Run terminal program “Tera Term” on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
zBaud:115200
zDatabits:8
zParity:None
zStopbits:1
zFlowcontrol:None
Figure 5-2 COM Port Conguration

11
5.1 Logging on to the Console
Once the terminal is connected to the device, power on the AP Managed Switch
and the terminal will display “running testing procedures”. Then, the following
message asks to log in user name and password. The factory default user name
andpasswordareshownasfollows,andtheloginscreeninFigure5-3appears.
Username:admin
Password:admin
Figure 5-3 Console Login Screen
The user can now enter commands to manage the AP Managed Switch. For a
detaileddescriptionofthecommands,pleaserefertothefollowingchapters.
Note
1. For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.

12
5.2 ConguringIPAddress
TheAPManagedSwitchisshippedwithdefaultIPaddressshownbelow.
IPAddress:192.168.1.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the AP Managed
Switch,pleaseusetheprocedureasfollows:
Showing the current IP Address
1. At the “#”prompt,enter“show ip interface brief”.
2.ThescreendisplaysthecurrentIPaddressasshowninFigure5-4.
Figure 5-4 IP Information Screen

13
 Conguring IP Address
3.At the “#” prompt, enter the following command and press <Enter> as shown
in Figure 5-5.
WS-1032P#congure terminal
WS-1032P(cong)#interface vlan 1
WS-1032P(cong-if-vlan)#ip address 192.168.1.101 255.255.255.0
The previous command would apply the following settings for the AP Managed
Switch.
IP Address: 192.168.1.101
Subnet Mask: 255.255.255.0
Figure 5-5 IP Address Screen
4.RepeatStep1tocheckiftheIPaddressischanged.

14
 Storing current conguration
5. At the “#”prompt,enterthefollowingcommandandpress<Enter>.
#copyrunning-congstartup-cong
Figure 5-6 Saving Current Conguration
If the IP is successfully congured, the AP Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of the AP Managed
SwitchthroughthenewIPaddress.
Note
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.

15
6.RecoveringBacktoDefaultConguration
IP Address has been changed or admin password has been
forgotten –
To reset the IP address to the default IP Address “192.168.1.100” or reset the
login password to default value, press the hardware-based reset button on the
front panel for about 10 seconds. After the device is rebooted, youcan log inthe
managementWebinterfacewithinthesamesubnetof192.168.1.xx.
4 6 82
1 3 5 7 9
10G SFP+
10
9
Reset
Console
115200,N,8,1
LNK/ACT1G/2.5G
LNK/ACT10G
10
Reset Button
Figure 6-1 Reset button of WS-1032P
115200, N, 8, 1
Console
2
1
4
3
SYS
AC
DC
Ring
Reset
ACT1000 LNK
ACT10/100 LNK
bt PoE
af/at PoE
Smart LCD
WS-2864PVR
Reset Button
Figure 6-2 Reset button of WS-2864PVR

16
7. Customer Support
Thank you for purchasing PLANET products. You can browse our online FAQ
resourceandUser’sManualonPLANETWebsiterst tocheckifit could solveyour
issue.Ifyouneedmoresupportinformation,pleasecontactPLANETsupportteam.
PLANETonlineFAQs:
https://www.planet.com.tw/en/support/faq
Supportteammailaddress
[email protected]
WS-1032P/WS-2864PVRUser’sManual:
https://www.planet.com.tw/en/support/downloads?&method=keyword&keyword=W
S&view=3#list
WS-1032P/WS-2864PVRQRCode:
Copyright © PLANET Technology Corp. 2021.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.