Plura PRM-3G Series User manual

®
PRM-3G Series
User
Manual
PRM-224-3G-O Integrated OLED Monitor
PRM-224-3G-O

PRM-224-3G-O USER MANUAL
2
PREACUTION--------------------------------------------------------------------------------------------------6
1. OVERVIEW------------------------------------------------------------------------------------------------8
2. GENERAL FEATURES -------------------------------------------------------------------------------------8
3. FUNCTIONAL EXPLANATION OF EACH PART ------------------------------------------------------ 10
1) FRONT PANEL------------------------------------------------------------------------------------------- 10
PRM-224-3G-O ------------------------------------------------------------------------------------ 10
Front Keys Arrangements ------------------------------------------------------------------------- 10
Front Keys Operations----------------------------------------------------------------------------- 11
Front panel LED Operations----------------------------------------------------------------------- 11
Speaker Out---------------------------------------------------------------------------------------- 11
2) REAR PANEL -------------------------------------------------------------------------------------------- 12
Connection Details -------------------------------------------------------------------------------- 12
Power IN ------------------------------------------------------------------------------------------- 12
RJ-45 ----------------------------------------------------------------------------------------------- 12
Interface description------------------------------------------------------------------------------- 13
4. MENU OVERVIEW ------------------------------------------------------------------------------------- 14
1. TO SHOW AND REMOVE THE MENU ---------------------------------------------------------------------- 14
2. TO GO TO THE NEXT LEVEL ------------------------------------------------------------------------------- 14
3. TO GO BACK TO THE PREVIOUS LEVEL --------------------------------------------------------------------- 14
4. TYPICAL MENU OPERATION------------------------------------------------------------------------------ 14
5. BASIC OPERATION ------------------------------------------------------------------------------------ 14
1. TURNING ON THE MONITOR----------------------------------------------------------------------------- 14
2. VOLUME ADJUSTMENT ---------------------------------------------------------------------------------- 15
3. ONSCREEN MENU LANGUAGE SELECTION---------------------------------------------------------------- 15
6. ON SCREEN MENUS SELECTION AND ADJUSTMENT --------------------------------------------- 15
1. HOW TO ADJUST THE OSD SCREEN ---------------------------------------------------------------------- 15
7. SELECT VIDEO INPUT --------------------------------------------------------------------------------- 16
1. HOW TO SELECT VIDEO SOURCE BY OSD----------------------------------------------------------------- 16
8. PICTURE MENU OPTIONS ---------------------------------------------------------------------------- 17
1) VIDEO MENU OF DIFFERENT INPUT MODES---------------------------------------------------------------- 17

PRM-224-3G-O USER MANUAL
3
2) ADJUST------------------------------------------------------------------------------------------------- 17
3) COLOR TEMPERATURE CONTROL ------------------------------------------------------------------------- 17
4) SCAN ------------------------------------------------------------------------------------------------- 18
5) ASPECT RATIO ------------------------------------------------------------------------------------------ 18
6) ZOOM-------------------------------------------------------------------------------------------------- 18
7) MONO/BLUE ONLY ------------------------------------------------------------------------------------- 19
8) PEAKING FILTER ----------------------------------------------------------------------------------------- 19
9) FALSE COLOR ------------------------------------------------------------------------------------------- 19
10) HDR MODE - OPTIONAL --------------------------------------------------------------------------- 20
11) NR (NOISE REDUCTION) ------------------------------------------------------------------------------ 20
12) OUTPUT RANGE -------------------------------------------------------------------------------------- 20
13) PC MENU (PC MODE ONLY) --------------------------------------------------------------------------- 20
14) NTSC SETUP (VIDEO MODE ONLY) -------------------------------------------------------------------- 21
9. AUDIO MENU OPTIONS ------------------------------------------------------------------------------ 21
1) MAIN / SUB AUDIO OUT ------------------------------------------------------------------------------- 21
2) SDI 1 / SDI 2 AUDIO OUTPUT CHANNEL ---------------------------------------------------------------- 21
3) SDI 1 / SDI 2 AUDIO GROUP --------------------------------------------------------------------------- 21
4) LEVEL METER ------------------------------------------------------------------------------------------- 22
5) LKFS - AUDIO LOUDNESS REAL-TIME MONITORING & LOGGING ------------------------------------------ 23
6) VOLUME------------------------------------------------------------------------------------------------ 24
10. MARKER MENU OPTIONS-------------------------------------------------------------------------- 25
1) MARKER & USER MARKER------------------------------------------------------------------------------- 25
2) SAFETY AREA ------------------------------------------------------------------------------------------- 25
3) CENTER MAKER ----------------------------------------------------------------------------------------- 25
4) MARKER WIDTH ---------------------------------------------------------------------------------------- 26
5) MARKER COLOR ---------------------------------------------------------------------------------------- 26
6) PRESET1 & PRESET2 ------------------------------------------------------------------------------------ 26
11. GPI MENU OPTIONS -------------------------------------------------------------------------------- 26
1) GPI CONTROL & GPI# --------------------------------------------------------------------------------- 26
12. SETUP MENU OPTIONS ---------------------------------------------------------------------------- 27
1) SETUP LOAD & SETUP SAVE ----------------------------------------------------------------------------- 27
2) FUNCTION 1 ~6 ---------------------------------------------------------------------------------------- 28

PRM-224-3G-O USER MANUAL
4
3) ONSCREEN DISPLAY ------------------------------------------------------------------------------------ 29
OSD Option ---------------------------------------------------------------------------------------- 29
Time code------------------------------------------------------------------------------------------ 29
Under Monitor Display (color: Tally R/G mode action ) ----------------------------------------- 29
Input ID -------------------------------------------------------------------------------------------- 29
SDI Signal state ------------------------------------------------------------------------------------ 30
4) ADVANCED --------------------------------------------------------------------------------------------- 30
Information ---------------------------------------------------------------------------------------- 30
Control --------------------------------------------------------------------------------------------- 30
Screen Control ------------------------------------------------------------------------------------- 30
Fan Control ---------------------------------------------------------------------------------------- 31
Network Config ------------------------------------------------------------------------------------ 31
X768 Mode ---------------------------------------------------------------------------------------- 31
5) CAPTION ----------------------------------------------------------------------------------------------- 31
6) WAVEFORM FORMAT (FOR SDI INPUT ONLY) ------------------------------------------------------------ 32
Y-Pb-Pr Waveform--------------------------------------------------------------------------------- 32
Y-Waveform + Vector Scope---------------------------------------------------------------------- 32
Double --------------------------------------------------------------------------------------------- 33
Y-Waveform + Vector Scope Trans --------------------------------------------------------------- 33
Vector Color --------------------------------------------------------------------------------------- 33
Line Select ----------------------------------------------------------------------------------------- 33
Line # ---------------------------------------------------------------------------------------------- 34
Line Display ---------------------------------------------------------------------------------------- 34
7) VIDEO RANGE ------------------------------------------------------------------------------------------ 34
8) DUAL LINK MODE (SDI ONLY) --------------------------------------------------------------------------- 34
9) SET ID & ACTIVE SET ID -------------------------------------------------------------------------------- 34
13. PIP (PICTURE IN PICTURE) ------------------------------------------------------------------------- 35
1) PIP ON/OFF------------------------------------------------------------------------------------------- 35
2) INPUT SOURCE------------------------------------------------------------------------------------------ 35
3) ASPECT RATIO ------------------------------------------------------------------------------------------ 35
4) POSITION----------------------------------------------------------------------------------------------- 36
5) PIP BLEND --------------------------------------------------------------------------------------------- 36
6) PIP SWAP ---------------------------------------------------------------------------------------------- 36
7) AUDIO SELECT ------------------------------------------------------------------------------------------ 36

PRM-224-3G-O USER MANUAL
5
14. OSD TREE -------------------------------------------------------------------------------------------- 37
1) VIDEO -------------------------------------------------------------------------------------------------- 38
2) AUDIO ------------------------------------------------------------------------------------------------- 39
3) MARKER------------------------------------------------------------------------------------------------ 40
4) GPI ---------------------------------------------------------------------------------------------------- 41
5) SETUP -------------------------------------------------------------------------------------------------- 42
6) PIP ---------------------------------------------------------------------------------------------------- 43
15. MECHANICAL DIMENSION------------------------------------------------------------------------- 44
1) PRM-224-3G-O--------------------------------------------------------------------------------------- 44

PRM-224-3G-O USER MANUAL
6
PREACUTION
Before operating this unit, please read this manual carefully.
WARNING:
To reduce the risk of any electric shock, please do not remove the back cover. No user serviceable pa
rts inside. Refer any service matters to qualified service personnel. To prevent fire or shock hazard, do
not expose the rear of the set to rain or moisture. Do not rub, clean or hit the Active Matrix LCD with object
that may scratch, mark, or damage the Active Matrix LCD permanently.
CAUTION:
Unauthorized tampering with the inside of the monitor invalidates the warranty.
The manufacturer shall not warrant for any damage caused by improper maintenance and/or repair or work
by third parties.
Important safeguards for you and your new product:
Your product has been manufactured and tested with your safety in mind. However, improper use can
result in potential electrical shock or fire hazards. Please read and observe the following safety points
when installing and using your new product and save them for future reference.
1. Read Instructions
2. Follow Instructions
All operating and use instructions should be followed.
3. Retain Instructions
The safety and operating instructions should be retained for future reference.
4. Notice Warnings
All warnings on the product and in the operating instructions should be adhered to.
5. Cleaning
Disconnect the unit from the mains before cleaning the unit. Do not use abrasive
cleaners. Use a damp cloth ONLY for cleaning.
6. Water and Moisture
Do not use this product near water.
7. Transporting Product
This product should be moved with care. Quick stops, excessive force and uneven
surfaces may cause the product damages.
8. Accessories
Do not use accessories not recommended by PLURA Inc. as they may cause hazards.
9. Ventilation
Do not block any of the ventilation openings.

PRM-224-3G-O USER MANUAL
7
Install in accordance with the manufacturer ’ s instructions.
10. Power Sources
This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply, consult your power supply
company.
11. Power Lead Polarization
This product is equipped with a three-wire grounding-type cord. This is a safety feature.
Do not use any other type power cord.
12. Power Cord Protection
Power-supply cords should be dressed so that they are not likely to be pulled or pinched
by items placed upon or against them.
13. Lightning
For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet. This will
prevent possible damage to the product due to lightning and power-line surges.
14. Grounding the product
This product must be grounded properly to comply with the safety regulations in the
country of use. If you are unsure of these regulations, please consult a qualified
electrician.
15. Servicing
Do not attempt to service this product by yourself as opening or removing covers may
expose you to dangerous voltages or other hazards. Refer all servicing to qualified
service personnel.
16. Damage Service Required
Isolate this product from the mains and refer to qualified service personnel under the
following conditions:
A. If the power-supply cord or plug is damaged.
B. If the front LCD front has been damaged.
C. If the product does not operate correctly by following the operating instructions. Use
only the user control buttons any improper adjustment of other controls may result
in damage and will often require extensive work by a qualified technician to restore
the product to its normal operation.
D. If the product has been dropped.
E. If the product exhibits a distinct change in performance.
17. Safety Check
Upon completion of any service or repairs to this product, ask the service technician to p
erform safety checks to determine that the product is in proper operating condition and t
he warranty seal is provided .
18. Mounting
The product should be mounted on a wall as recommended in the instructions.
19. Power
This set operates on an AC supply; the voltage is as indicated on the label on the Manual.
This appliance must be earthed at all times through the chassis as well as through the
power lead.

PRM-224-3G-O USER MANUAL
8
1. OVERVIEW
New PRM-3G series including PRM-224-3G offers an elegant slim design integrated with Grade A -
10 BIT OLED 24.5" panel and delivers outstanding BLACK performance, very fast response time for
smooth video with virtually NO motion blur, High contrast of 5000:1, wide viewing angle, accurate color
reproduction and quality picture consistency that meets all your HD & SD Monitoring application. PRM-
3G series also includes PRM-217-3G, Plura 17" FULL HD 1920x1080 Precision Broadcast LCD Series is
built with Grade A - 10 BIT LED 17".
PRM Plura Precision Broadcast LCD Series supports 3 Gbps – 1080P/60P input capability as well as all
other types of digital video formats HD & SD-SDI and analog video formats like RGB, Component and
Composite signals.
2. GENERAL FEATURES
The new PBM-4K has the following advanced features:-
2 x 3G, 1.5G
10 bit panel color depth
Supports up to 2048 x 1080 resolutions
HDR (High Dynamic Range) capabilities – OPTIONAL
PQ ( SMPTE ST 2084 ) & HLG ( Hybrid Log Gamma ) – OPTIONAL
Side by side HDR / SDR mode – OPTIONAL
RGB 12 Bit Digital Signal Processing
178° Viewing Angle Display
Gamma Selectable (0.8 – 3.0)
Color Temperature – User, VAR, Adjustable (11000K TO 3200K)
(ICAC) - Plura Intelligent Connection for Alignment & Calibration
3D LUT ( ITU-R BT 2020, Native, BT.709, SMPTE-C, EBU, NTSC, D-Cinema, 709)
Display Advanced Waveform & Vector Scope simultaneously with line select.
Various and User defined Markers Display, Safe Area

PRM-224-3G-O USER MANUAL
9
Programmable 6 User Front Pushbutton Controls & GPI
LKFS AUDIO Measurement - Digital Loudness Audio Metering with selected channel
measurement in LFKS scale
LKFS AUDIO Logging using the optional PSC/500 controller S/W
Closed Caption (608/708) – North American Market
Cutting edge De-interlacing and Scaling Technology
Fast Response Time for high motion video
Internal Monitor Display (IMD)
Ethernet & RS232 Remote Control
Underscan / Overscan / Normal / Zoom
Pixel to Pixel Mode, Tally, DC Operation
False Color and Peaking Filter / Focus Assist
Video Range test with adjustable Y & C values
Display LTC & DVITC time code with line select
Embedded Audio Input, Digital Audio Decoding
Internal Pattern Generator and Wall Control System
Built In Stereo Speaker, 16 CH Audio Metering Display
Rack-Mount OPTIONAL
Battery Mount OPTIONAL

PRM-224-3G-O USER MANUAL
10
3. Functional explanation of each part
1) Front Panel
PRM-224-3G-O
Front Keys Arrangements
Speaker
Front Key
LED
Tally LED
Headphone
IR

PRM-224-3G-O USER MANUAL
11
Front Keys Operations
Key Name
Operation
STANDBY
►Power ON/OFF Button.
SDI 1
►Select SDI 1 source
SDI 2
►Select SDI 2 source
HDMI/DVI
►Select HDMI & DVI source
ANALOG
►Select ANALOG source
( ‘Composite1’ ->‘Composite2’ ->‘Composite3’ -> ‘S-video’ -> ’.B.R’ -> ‘Y.Pb.Pr’ -> ’PC’ )
MARKER
►Display Marker on Screen ( Off -> 16:9 -> 4:3 … -> 2.35:1 )
SCAN
►Executes Scan function ( Over-Scan -> Zero-Scan -> Under Scan-> Pixel to Pixel)
FUNCTION
►When pushed it will display a list of the 6 function keys and what they are currently set
to.
►F1 ~ F6 Programmable KEYS.
F1 ~ 6
►Executes functions of user selected
UNDEF, Marker Size, Audio LV Meter, Wf/Vector, H/V delay. Aspect, Audio
Loudness(LKFS), Mono/Blue only, Audio Channel, Safety marker size, Time code, Caption,
Audio mute, Still image, Zoom, Flip, Gamma select, Vector Color, Fan Control, I/P Mode,
Marker Preset1, Marker Preset2, WFM Line Select, PIP func & Input, Sub win full, Sub win
part
MENU
►Activates main OSD menu.
►Navigates higher menu in main OSD menu.
►Exits OSD menu.
UP
►Increases Audio volume of speaker.
►Increases values of user menu in main OSD menu.
►Executes function (by OSD help commands) in main OSD menu.
DOWN
►Decreases Audio volume of speaker.
►Decreases values of user menu in main OSD menu.
►Executes function (by OSD help commands) in main OSD menu.
SEL/INPUT
►Activates OSD menu of input source selecting.
►Changes input source by selecting.
►Executes functions (by OSD help commands) in main OSD menu.
Adjust
►Adjust Picture Menu(Volume -> Brightness -> Contrast -> Color -> Sharpness-> & Tint)
►Turn Right (with ‘UP' button is same)
►Turn Left (with ‘DOWN' button is same)
Front panel LED Operations
- Power ON mode is LED Green
- Stan-by mode is LED Red
Speaker Out
Interface
Description
Speaker R/L out
8 ohm±15%, Max 4W + 4W

PRM-224-3G-O USER MANUAL
12
2) Rear Panel
Connection Details
Power IN
RJ-45
Remote PIN Assignment
GPI 7 PORT
(STAND BY/POWER ON/OFF)
IN NO
Description
1,2
GND
3,4
+ 24V
ETHERNET
GPI
DC 24V IN
1
2
3
4
8PIN COMMON(GND) 4PIN GPI 4 PORT
7PIN 3PIN GPI 3 PORT
6PIN GPI 6 PORT 2PIN GPI 2 PORT
5PIN GPI 5 PORT 1PIN GPI 1 PORT

PRM-224-3G-O USER MANUAL
13
Interface description
Interface
Description
SDI 1 IN
HD SDI / SD SDI Input
SDI 2 IN
SDI 1 OUT
SDI 1, SDI 2 Loop Out
SDI 2 OUT
RS-232 IN
Update/Multi Control/Auto color calibration
RS-232 OUT
Multi Control out
HDMI
High Definition Multimedia Input
DVI-I
DVI-I Type Digital / Analog PC-RGB Video Input
High Definition Multimedia Input Compatible
CVBS1/Pr/R In
GBR (SOG sync) Input
Y, Pb, Pr Component Video Input
CVBS / Composite/S-Video Input
CVBS2/Y/G/Y In
CVBS3/Pb/B/C In
CVBS1/Pr/R Out
Component/GBR/Composite1,2,3/ S-Video Loop Out
CVBS2/Y/G/Y Out
CVBS3/Pb/B/C Out
AUDIO R In
DVI-I/Component/GBR/Composite1,2,3/S-Video Sound Input
AUDIO L In
AUDIO R Out
AUDIO MONITOR OUT
AUDIO L Out
AC IN
AC90V ~ 240V, 50Hz/60Hz
DC IN
DC 24V
UPDATE
Firmware Upgrade
GPI
GPI 1 ~ 7 Control Port
Control Terminal: 1 ~ 7 Pin
Contact Point Switch
It is possible to attach
pin one by one.
GND Terminal: 8 Pin of RJ-45

PRM-224-3G-O USER MANUAL
14
4. MENU OVERVIEW
In this system menu, there are several ways to maneuver the menu settings.
Most menus consist of three levels to select the necessary option, but some settings require greater depth.
If you press the MENU button, the first and second level of the menu system will appear on the monitor
screen. The third level can be displayed by pressing SEL/INPUT. If a menu has more than three levels,
the pop-up dialogue box will be displayed as the fourth or fifth level.
1. To show and remove the Menu
Press the MENU button to display the menu. Press the MENU button again to hide the menu.
2. To go to the next level
Press SEL/INPUT button.
3. To go back to the previous level
Press MENU button
4. Typical Menu Operation
1. Press MENU button: The main menu will be displayed.
2. Use UP/DOWN button to select the desired menu option (icon).
3. While the desired menu option is selected, press SEL/INPUT to move to the second level.
4. Use UP/DOWN button to select the second menu option.
5. Press SEL/INPUT to move to the third level: Some menu options require additional steps.
6. Press MENU to return to the previous menu to return to monitor viewing.
5. BASIC OPERATION
1. Turning On the Monitor
1. Firstly, make sure you have connected the AC power cord or DC XLR connector. The monitor will switch
to standby or power on mode. If the monitor is in standby mode, press the ST-BY button to turn on the
monitor.
2. Select the source by using SEL/INPUT button on Keypad in front of monitor

PRM-224-3G-O USER MANUAL
15
2. Volume Adjustment
1. Press the ADJUST button on Keypad.
2. Press the MENU button on Keypad.
- OSD Audio menu -> Volume menu.
3. On Screen Menu Language Selection
- SETUP -> On Screen Display -> OSD Option -> Language
- The menu can be shown on the screen in the selected language.
- Supported Languages: English, Spanish, Portuguese, German, French,
Italian, Hindi
6. On Screen Menus Selection and Adjustment
1. How to adjust the OSD screen
1. Press the MENU button and then UP/DOWN button to select each menu.
2. Press the SEL/INPUT button and then use UP/DOWN (SEL/INPUT)/MENU button to display the
available menu.

PRM-224-3G-O USER MANUAL
16
• The monitor's OSD (On Screen Display) may differ slightly from what is shown in this manual.
7. SELECT VIDEO INPUT
1. How to Select Video Source by OSD
1. Press the SET/INPUT button and then UP/DOWN button to select the required video source.
2. Press the SET/INPUT button to select the desired video source.
3. If Input Name is enabled, The SET/INPUT button will show the input name previously programmed
instead of the source name.

PRM-224-3G-O USER MANUAL
17
8. PICTURE MENU OPTIONS
1) Video Menu of different Input modes
< Video (NTSC) Picture menu> < PC Picture menu> < SDI, HDMI Picture menu>
2) Adjust
- Adjust the values of Brightness, Contrast, Color, Tint and
Sharpness range from -50 to 50
Contrast, Brightness, Sharpness, Color (All Sources), Tint (except
PC, DVI, HDMI, Component), Phase (Component).
3) Color Temperature Control
- For Setting the Color temperature or adjusting RGB gain value
- User (User setting RGB gain value), VAR(3200K ~ 11000K), Often used value(11000K, 9300K, 6500K,
5400K,3200K) and 3D LUT Calibration value(D65 – 6504K/C-6774K/D-Cinema 6302K)
- Color Space: Native/BT.709/SMPTE-C/EBU/NTSC/D-Cinema

PRM-224-3G-O USER MANUAL
18
4) SCAN
1. Over Scan – 95% input size and fit the selected display size
2. Zero Scan – 100% Input size and fit the selected display size
3. Under Scan – 105% Input size and fit the selected display size
3. Pixel to Pixel – Display size is an input size. If input resolution
is bigger than panel size, fit the panel size
5) Aspect Ratio
- For setting the aspect ratio.
- Full Screen: The images are displayed with a panel size.
- Full Screen, 16:9, 4:3, 14:9, 13:9, 1.85:1, 2.35:1: The images are displayed with each aspect ratio.
- Funtion-key operate Rotation, Full Screen, 16:9, 4:3, 14:9, 13:9, 1.85:1, 2.35:1
- AFD function Added
- PC mode: Full Screen & 4:3 only
6) Zoom
- Can enlarge picture by (2X, 3X, 4X, 5X) ratios.
- If user selects the Zoom 2X, Yellow box will be displayed.
- Press Select or Enter button, the monitor will display a zoom in
portion of this specified location.
- Press Menu key to exit the zoom mode.
- Example (3X3)

PRM-224-3G-O USER MANUAL
19
Zoom X position: Coordinate of video image’s column position.
Zoom Y position: Coordinate of video image’s row position.
7) Mono/Blue Only
- Mono color: For selecting monochrome images.
- Blue Only: Blue Video channel is enabled
8) Peaking Filter
-Peaking Filter: Peaking Filter On/Off.
-Peaking Color: Red/Blue/White/Violet.
-Peaking Level: 0~100.
9) False Color
- False Color on/off
PRM-224-3G-O USER MANUAL
19
Zoom X position: Coordinate of video image’s column position.
Zoom Y position: Coordinate of video image’s row position.
7) Mono/Blue Only
- Mono color: For selecting monochrome images.
- Blue Only: Blue Video channel is enabled
8) Peaking Filter
-Peaking Filter: Peaking Filter On/Off.
-Peaking Color: Red/Blue/White/Violet.
-Peaking Level: 0~100.
9) False Color
- False Color on/off
PRM-224-3G-O USER MANUAL
19
Zoom X position: Coordinate of video image’s column position.
Zoom Y position: Coordinate of video image’s row position.
7) Mono/Blue Only
- Mono color: For selecting monochrome images.
- Blue Only: Blue Video channel is enabled
8) Peaking Filter
-Peaking Filter: Peaking Filter On/Off.
-Peaking Color: Red/Blue/White/Violet.
-Peaking Level: 0~100.
9) False Color
- False Color on/off

PRM-224-3G-O USER MANUAL
20
10) HDR Mode - OPTIONAL
- ST 2084-300 / ST 2084-1000 / ST 2084-10000 / HLG
- HDR Demo on/off
- HDR Demo split the screen vertically and shows the image
with and without HDR.
11) NR (Noise Reduction)
-Noise Reduction on/off. (NR is for (HD-SDI, Composite, S-Video and Y.Pb.Pr) Video signal.
12) Output Range
- Normal (16~235)/Full (0~255)
13) PC Menu (pc mode only)
- Operate Only in PC input mode