Plura SFP-H Series User manual

Re-imagine Beyond Technology [e-mail]
Operating Instructions
SFP-H & SFP-H-7
"HYBRID" Series
SFP-317-H / SFP-317-H-7
SFP-321-H / SFP-321-H-7
SFP-324-H / SFP-324-H-7
SFP-332-H / SFP-332-H-7
SFP-347-H / SFP-347-H-7
SFP-355-H / SFP-355-H-7
SFP-365-H / SFP-365-H-7
SFP-384-H / SFP-384-H-7
SFP-324-H-7
SFP-Modules

Re-imagine Beyond Technology [e-mail]
PRECAUTION--------------------------------------------------------------------------------------------------6
1. OVERVIEW------------------------------------------------------------------------------------------------9
2. GENERAL FEATURES-------------------------------------------------------------------------------------9
3. FUNCTIONS AND I/O DESCRIPTIONS --------------------------------------------------------------- 10
1) FRONT ----------------------------------------------------------------------------------------------- 10
SFP-317-H------------------------------------------------------------------------------------------ 10
Front Keypad--------------------------------------------------------------------------------------- 10
Front Keypad Operations ------------------------------------------------------------------------- 11
SFP Modules Information ------------------------------------------------------------------------- 11
Front panel LED Operations----------------------------------------------------------------------- 12
Speaker Out---------------------------------------------------------------------------------------- 12
2) REAR ------------------------------------------------------------------------------------------------- 12
I/O Details ----------------------------------------------------------------------------------------- 12
Power IN – AC & DC ------------------------------------------------------------------------------ 12
PIPM-R-7 OPTION --------------------------------------------------------------------------------- 13
PIPM-R-7 Connectivity ---------------------------------------------------------------------------- 13
PIPM-R-7 configuration page--------------------------------------------------------------------- 14
RJ-45 Connections--------------------------------------------------------------------------------- 16
I/O Description ------------------------------------------------------------------------------------ 16
4. MENU OVERVIEW ------------------------------------------------------------------------------------ 17
To display / hide the Menu ----------------------------------------------------------------------- 17
To go to the next level ---------------------------------------------------------------------------- 17
To go back to the previous level ----------------------------------------------------------------- 17
Typical Menu Operation--------------------------------------------------------------------------- 17
5. BASIC OPERATION ------------------------------------------------------------------------------------18
Turning ON & OFF the Monitor ------------------------------------------------------------------ 18
Volume Adjustment ------------------------------------------------------------------------------- 18
On Screen Menu Language Selection ------------------------------------------------------------ 18
6. ON SCREEN MENU SELECTION AND ADJUSTMENT ---------------------------------------------- 19
How to adjust the OSD screen ---------------------------------------------------------------------- 19
7. SELECT VIDEO INPUT --------------------------------------------------------------------------------- 19
Operating Instructions
SFP-H / SFP-H-7
2

Re-imagine Beyond Technology [e-mail]
How to Select Video Source by OSD----------------------------------------------------------- 19
8. MENU OPTIONS FOR DIFFERENT I/P SOURCES ---------------------------------------------------- 20
Menu of different Input source ------------------------------------------------------------------- 20
Adjust ---------------------------------------------------------------------------------------------- 21
Color Temperature Control------------------------------------------------------------------------ 21
SCAN ----------------------------------------------------------------------------------------------- 21
Aspect Ratio --------------------------------------------------------------------------------------- 22
Zoom ----------------------------------------------------------------------------------------------- 22
Mono/Blue Only ----------------------------------------------------------------------------------- 23
PC Menu (pc mode only) ------------------------------------------------------------------------- 23
Flip ------------------------------------------------------------------------------------------------- 23
NR (Noise Reduction) ----------------------------------------------------------------------------- 24
SFP Setting----------------------------------------------------------------------------------------- 24
9. AUDIO MENU OPTIONS ------------------------------------------------------------------------------ 25
MAIN / SUB Audio out---------------------------------------------------------------------------- 25
SDI Main/ SDI Sub Audio Output Channel ------------------------------------------------------ 25
SDI Main/ SDI Sub Audio Group ----------------------------------------------------------------- 25
Level Meter ---------------------------------------------------------------------------------------- 25
Level Meter Type ---------------------------------------------------------------------------------- 26
Level Meter Position------------------------------------------------------------------------------- 26
Level Meter Scale ---------------------------------------------------------------------------------- 26
Audio Loudness (LKFS) ---------------------------------------------------------------------------- 26
Volume --------------------------------------------------------------------------------------------- 27
Lip Sync Delay ------------------------------------------------------------------------------------- 27
10. MARKER MENU OPTIONS---------------------------------------------------------------------------- 28
Marker & User Marker ---------------------------------------------------------------------------- 28
Safety Area----------------------------------------------------------------------------------------- 28
Center Maker -------------------------------------------------------------------------------------- 29
Marker Width -------------------------------------------------------------------------------------- 29
Marker Color--------------------------------------------------------------------------------------- 29
Preset1 & Preset2 --------------------------------------------------------------------------------- 29
11. GPI MENU OPTIONS ---------------------------------------------------------------------------------- 30
Operating Instructions
SFP-H / SFP-H-7
3

Re-imagine Beyond Technology [e-mail]
GPI Control & GPI#-------------------------------------------------------------------------------- 30
12. SETUP MENU OPTIONS ---------------------------------------------------------------------------- 31
Setup Load & Setup Save------------------------------------------------------------------------- 31
Function 1 & Function 2 & Function 3----------------------------------------------------------- 31
On Screen Display --------------------------------------------------------------------------------- 32
OSD Option ---------------------------------------------------------------------------------------- 32
Time code------------------------------------------------------------------------------------------ 33
Under Monitor Display (color: Tally R/G mode action ) ----------------------------------------- 33
Input ID -------------------------------------------------------------------------------------------- 33
SDI Signal state ------------------------------------------------------------------------------------ 34
Advanced ------------------------------------------------------------------------------------------ 34
Information ---------------------------------------------------------------------------------------- 34
Control --------------------------------------------------------------------------------------------- 34
Screen Saver --------------------------------------------------------------------------------------- 35
Screen Control ------------------------------------------------------------------------------------- 35
Fan Control ---------------------------------------------------------------------------------------- 35
Network Configuration ---------------------------------------------------------------------------- 36
X768 Mode ---------------------------------------------------------------------------------------- 36
Caption--------------------------------------------------------------------------------------------- 36
Waveform Format (SDI ONLY) -------------------------------------------------------------------- 37
Y-Pb-Pr Waveform--------------------------------------------------------------------------------- 37
Y-Waveform + Vector Scope---------------------------------------------------------------------- 37
Double --------------------------------------------------------------------------------------------- 38
Y-Waveform + Vector Scope Trans --------------------------------------------------------------- 38
Vector Color --------------------------------------------------------------------------------------- 38
Line Select ----------------------------------------------------------------------------------------- 38
Line # ---------------------------------------------------------------------------------------------- 39
Line Display ---------------------------------------------------------------------------------------- 39
Dual Link Mode (SDI only) ------------------------------------------------------------------------ 39
Set ID & Active Set ID ---------------------------------------------------------------------------- 39
13. PIP (PICTURE IN PICTURE) ------------------------------------------------------------------------- 39
PIP ON/OFF ---------------------------------------------------------------------------------------- 39
Input Source --------------------------------------------------------------------------------------- 39
Operating Instructions
SFP-H / SFP-H-7
4

Re-imagine Beyond Technology [e-mail]
Aspect Ratio --------------------------------------------------------------------------------------- 40
Position--------------------------------------------------------------------------------------------- 40
PIP Blend ------------------------------------------------------------------------------------------- 41
PIP Swap ------------------------------------------------------------------------------------------- 41
Audio Select --------------------------------------------------------------------------------------- 41
Sub Window Function----------------------------------------------------------------------------- 41
14. OSD TREE ------------------------------------------------------------------------------------------- 43
1) VIDEO-------------------------------------------------------------------------------------------------- 44
2) AUDIO ------------------------------------------------------------------------------------------------- 45
3) MARKER------------------------------------------------------------------------------------------------ 46
4) GPI ---------------------------------------------------------------------------------------------------- 47
5) SETUP -------------------------------------------------------------------------------------------------- 48
6) PIP ---------------------------------------------------------------------------------------------------- 49
Operating Instructions
SFP-H / SFP-H-7
5

Re-imagine Beyond Technology [e-mail]
Precaution
B efore operating the set, please read this m anual carefully.
W A R N IN G :
T o re duc e the ris k of a ny e le c tr ic s hock, do not r e move back cove r as the re are no us e r s e rv
ic e a b le pa r ts ins ide . Ple a s e re fe r to P lura or a qualifie d s e r vic e pe r s onne l/a ge nt. T o pr e ve nt
fir e or s hock hazar d, do not e xpos e the r e a r s ide of the unit to rain or mois tur e . Do not r ub or cle a n
the Active Mat r ix LCD with a ny ha r s h s ur face a s this may s cr a tch, ma r k, or damage the Active
Matr ix LCD pe r mane ntly.
C A U T IO N :
Una uthorize d tampe ring with the ins ide of the monitor voids the wa r r anty.
T he ma nufac tur e r s hall not wa r r a nt for any damage caus e d by impr ope r mainte nance and/or re pair
by a ny thir d pa r ty.
Impor ta nt s a fe gua r ds for you and your ne w pr oduc t:
Ple a s e re ad and ob s e r ve the fo llowing s afe ty point s whe n in s talling a nd us ing your ne w de vi
ce and s ave the m for future r e fe r e nce .
1. R ead Instructions
2. F ollow Instructions
A ll operating and use instructions should be follow ed.
3. R etain Instructions
T he safety and operating instructions should be retained for future reference.
4. O bserve W arnings
A ll w arnings on the product and in the operating instructions should be adhered to.
5. C leaning
D isconnect the unit from the m ains before cleaning. D o not use abrasive cleaners. U se a
dam p cloth for cleaning.
Operating Instructions
SFP-H / SFP-H-7
6

Re-imagine Beyond Technology [e-mail]
6. W ater and M oisture
D o not use this unit near w ater.
7. T ransportation
A product should be transported w ith care. E xcessive force and uneven surfaces m ay
cause the dam age to product.
8. A ttachm ents
D o not use attachm ents not recom m ended by P lura as they m ay cause hazards.
9. V entilation
D o not block any of the ventilation openings.
Install in accordance w ith the m anufacturer
’ s instructions.
10. P ow er S ources
T his product should be operated only from the type of pow er source indicated on the
m arking label. If you are not sure of the type of pow er supply, consult your pow er com pany.
11. P ow er L ead P olarization
T his product is equipped w ith a three- w ire grounding- type cord. T his is a safety feature.
D o not use an alternative pow er cord.
12. P ow er C ord P rotection
P ow er- supply cords should be protected so that they are not likely to be w alked on or
pinched by item s placed upon or against them , paying particular attention to cords at plugs,
convenience receptacles and the point w here they exit from the product.
13. O utdoor C able G rounding
If an outdoor cable is connected to the product, be sure the cable is grounded to provide
som e protection against voltage surges and built- up static charges. A
“ face plate ” also
needs to be installed w ith an isolating capacitor to prevent any dam age from static.
14. L ightning
F or added protection for this product during a lightning storm , or w hen it is left unattended
and unused for long periods of tim e, unplug it from the w all outlet. T his w ill prevent
possible dam age to the product due to lightning and pow er- line surges.
15. E arthing the product
T his product m ust be earthed properly to com ply w ith the safety regulations in the country
of use. If you are unsure of these regulations, please consult a qualified electrician.
16 . S ervicing
D o not attem pt to service this product yourself as opening or rem oving covers m ay ex pose
you to dangerous voltages or other hazards. R efer all servicing to qualified service
personnel. If the device does not operate properly, sw itch it off and call your dealer.
Operating Instructions
SFP-H / SFP-H-7
7

Re-imagine Beyond Technology [e-mail]
17 . S ervice
T urn this product off, unplug from the m ains supply and refer servicing to qualified service
personnel under the follow ing conditions:
A . If the pow er- supply cord or plug is dam aged.
B . If the L C D has been dam aged.
C . If w ater or m oisture penetrated the glass and/or the L C D screen.
D . If the product does not operate norm ally by follow ing the operating instructions.
A djust only those controls that are covered by the operating instructions as an
im proper adjustm ent of other controls m ay result in dam age and w ill often require
ex tensive w ork by a qualified technician to restore the product to its norm al
operation.
E . If the product has been dropped or the fram e has been dam aged.
F . If the product exhibits a distinct change in perform ance.
18. S afety C heck
U pon com pletion of any service or repairs to this product, ask the service technician to p
erform safety checks to determ ine that the product is in proper operating condition and t
he front seal is intact
.
19. M ounting
T he product should be m ounted on a w all only as recom m ended in the instructions.
20. P ow er
T his device operates on an A C supply; the voltage is as indicated on the label on the
M anual. T his device m ust be earthed at all tim es through the chassis as w ell as through
the pow er lead.
Operating Instructions
SFP-H / SFP-H-7
8

Re-imagine Beyond Technology [e-mail]
SFP-H & SFP-H-7 are the NEW FUTURE PROOF Hybrid Monitor Series, supporting Coax, Fiber & IP
connectivity.
These series will be available in multiple sizes starting from 17” all the way to 84”.
The SFP-H is integrated with powerful H/W & S/W platforms to support Coaxial 3Gb/s BNC I/O connectivity,
Coaxial SFP I/O connectivity, IP SFP+ over Fiber decoding "ST-2110 & ST-2022" with Third-Party H/W
decoder and the NEW PIPM-R-7 "Plura FPGA based module supports 3G SMPTE ST 2110 signals across dual
10 GigE and it features 2x 10 GbE SFP+ cages complying with SMPTE ST 2022-7, providing redundancy
protection for critical distribution and monitoring applications “hitless switching”. The PIPM-R-7 is standard
with SFP-H-7 and can be integrated into any size SFP-H monitor.
The New FUTURE PROOF SFP-H, Hybrid Monitor Series, supporting Coax, Fiber & IP connectivity
Decode ST-2110, ST-2022 and ASPEN IP streams with "PIPM" Plura Software Stack IP Platform
module
Supports Coaxial 3Gb/s BNC I/O connectivity
Supports Coaxial SFP I/O connectivity
Supports IP SFP+ over fiber decoding "ST-2110 & ST-2022" with any Third-Party H/W decoder
2 x SFP+ cages supporting 10G/3G/1.5G SDI
1 x 3G/1.5G Input port
2 x 3G/1.5G output ports
LKFS Audio Loudness logging & measurement
*“PIPM-R-7” Plura Software Stack IP Platform - OPTIONAL
Built-IN 4 x 4 Crosspoint Solution
1 x HDMI, 1 x DVI & other legacy I/O
178 degree Viewing Angle Display
Gamma Selectable ( 0.8 - 3.0)
Color Temperature - User, VAR, Adjustable (11000K TO 3200K)
(ICAC) - Plura Intelligent Connection for Alignment & Calibration
Display Advanced Waveform & Vector Scope simultaneously with line select
Various and User defined Markers Display & Safe Area
Programmable 3 User Front Pushbutton Controls & GPI
Closed Caption (608/708) - North American Market
Cutting edge De-interlacing and scaling Technology
Fast Response Time for high motion video
Internal Monitor Display (IMD)
Ethernet & RS232 Remote Control
Underscan / Overscan / Normal / Zoom
Pixel to Pixel Mode, Tally, DC operation only “SFP-317-H & SFP-321-H”
False Color and Peaking Filter / Focus Assist
Video Range test with adjustable Y & C values
Display LTC & DIVTC time code with line select
Embedded Audio input, Digital Audio Decoding
Internal Pattern Generator and Wall Control System
Auto Calibration: Spyder Elite / CA-210 & CA-310(Minolta) / K-10(Klein) / Jetti
2. GENERAL FEATURES
1. OVERVIEW
Operating Instructions
SFP-H / SFP-H-7
9

Re-imagine Beyond Technology [e-mail]
•FFront Keypad
Headphone
LED Front Key
Speaker
USB-PIPM
3. Functions and I/O descriptions
1) Front
SFP-317-H
Operating Instructions
SFP-H / SFP-H-7
10

Re-imagine Beyond Technology [e-mail]
•Front Kepad Operationserations
Key Name Operation
STANDBY ►Power ON/OFF Button. This button is operated after being pressed about 3 seconds.
INPUT
SFP1/SFP2/SDI/PIPM
►SFP Modules Input CH selected.
►Channels in the input signal, the key led light.
OUTPUT
SFP1/SFP2/SDI/AUX/
MAIN/SUB
►SFP Modules Output CH selected.
ALL ►SFP Modules ALL Output CH selected.
FUNCTION
F1/F2/F3
►Executes functions of user selected.
UNDEF, Aspect, Mono/Blue only, Audio Channel, Safety area marker, Time code,
Analog Caption, Audio mute, Still image, Zoom, Flip, Gamma select, PIP func & Input,
Sub win full, Sub win part
SEL/INPUT
►Activates OSD menu of input source selecting.
►Changes input source by selecting.
►Executes functions (by OSD help commands) in main OSD menu.
►Activates child menu.
MENU
►Activates main OSD menu.
►Navigates higher menu in main OSD menu.
►Exits OSD menu.
Adjust
►Adjust Picture Menu(Brightness -> Contrast -> Color -> Sharpness->Phase & Tint)
►Turn Right (with „UP' button is same)
►Turn Left (with „DOWN' button is same)
•SFP Modules Information
SFP1/SFP2: SFP Module information will
be displayed when available.
The selected output channel will be in
Yellow.
SFP1/SFP2/SDI/PIPM: Available input channels.
SFP1/SFP2/SDI/Aux/SDI Main/SDI Sub:
can be selected as output port.
Operating Instructions
SFP-H / SFP-H-7
11

Re-imagine Beyond Technology [e-mail]
•Front panel LED Operations
Interface Description
Speaker R/L out 8 ohm±15%, Max 3W + 3W
Green LED ON when Function Key and Power On
RED LED ON in standby mode
•Speaker Outt
2)
Rear
•I/O Details
•Power IN – AC & DC
PIN NO Description
1 , 2 GND
3 , 4 + 12V
1
23
4
Operating Instructions
SFP-H / SFP-H-7
12

Re-imagine Beyond Technology [e-mail]
•PIPM-R-7 OPTION
•PIPM-R-7 Connectivity
PIPM-R-7 In OPS 8p Connector
Operating Instructions
SFP-H / SFP-H-7
13

Re-imagine Beyond Technology [e-mail]
•PIPM-R-7 configuration page
Please enter the static IP address listed on the back of the monitor. You will see the below
webpage.
Select Video Level
Set PTP
Operating Instructions
SFP-H / SFP-H-7
14

Re-imagine Beyond Technology [e-mail]
Select input setting
Select SDP, Manual or NMOS/Ember.
SDP - The SDP method greatly simplifies the configuration process for the Input Stream Selection fields.
Selecting SDP causes the following four fields to display:
oSDP URL Video - Enter the SDP URL Video string.
oSDP URL Audio - Enter the SDP URL Audio string.
oSDP URL Video 2 - Enter the SDP URL Video string.
oSDP URL Audio 2 - Enter the SDP URL Audio string.
The strings entered into the SDP URL Video and SDP URL Audio fields point to SDP files that are created
by the source that is transmitting the video signal.
The SDP files contain all required configuration parameters for the following Input Stream Selection fields:
• Video Input Format
• Video Destination Address
• Video Source Address
• Video 2 Destination Address
• Video 2 Source Address
• Audio Channels
• Audio Packet Interval
• Audio Destination Address
• Audio Source Address
• Audio 2 Destination Address
• Audio 2 Source Address
Operating Instructions
SFP-H / SFP-H-7
15

Re-imagine Beyond Technology [e-mail]
•RJ-45 Connections
- Firmware Upgrade/ System Controller (Ethernet) & GPI
Remote PIN Assignment
8 PIN COMMON(GND) 4 PIN GPI 4 PORT
7 PIN GPI 7 PORT
(STAND BY/POWER ON/OFF) 3 PIN GPI 3 PORT
6 PIN GPI 6 PORT 2 PIN GPI 2 PORT
5 PIN GPI 5 PORT 1 PIN GPI 1 PORT
GPI ETHERNET/UPDATE RJ 45 Jack Face
I/O Description
Interface Description
SFP Module
2 Slot Input CH 1 Output CH 1
Input CH 2 Output CH 2
SDI Input Output
AUX Output
RS-232 IN Update/Multi Control/Auto color calibration
HDMI High Definition Multimedia Input
DVI-I DVI-I Type Digital / Analog PC-RGB Video Input
High Definition Multimedia Input Compatible
Control Terminal: 1 ~ 7 Pin
GND Terminal: 8 Pin of RJ-45 Contact Point Switch
It is possible to attach
pin one by one.
Operating Instructions
SFP-H / SFP-H-7
16

Re-imagine Beyond Technology [e-mail]
CVBS2/Y/G/Y In Y, Pb, Pr Component Video Input
CVBS / Composite/S-Video Input
CVBS3/Pb/B/C In
CVBS1/Pr/R Out Component/GBR/Composite1,2,3/ S-Video Loop OutCVBS2/Y/G/Y Out
CVBS3/Pb/B/C Out
AUDIO R In DVI-I/Component/GBR/Composite1,2,3/S-Video
Sound Input
AUDIO L In
AUDIO R Out AUDIO MONITOR OUT
AUDIO L Out
AC IN AC90V ~ 240V, 50Hz/60Hz
DC IN PBM-217: DC 11V ~ 17V ,PBM-224: DC 24V
ETHERNET UPDATE ETHERNET/Firmware Upgrade
GPI GPI 1 ~ 7 Control Port
4.
MENU OVERVIEW
In this menu system, there are several ways to customize the menu settings.
Most menus consist of three levels to select the correct option/s, but some require greater depth for
variety of settings. If you press the MENU button, only the first and second level of the menu system will
appear on the monitor screen. The third level can be displayed by pressing SEL/INPUT. If a menu has
more than three levels, the pop-up dialogue box will be displayed as the fourth or fifth level.
To display / hide the Menu
Press the MENU button to display the menu. To exit the menu, press the MENU button
second time.
To go to the next level
Press SEL/INPUT button.
To go back to the previous level
Press MENU button
Typical Menu Operation
1. Press MENU button: The main menu will be displayed.
2. Use Adjust / Take button Turn Right/ Left to select the desired menu option (icon).
Operating Instructions
SFP-H / SFP-H-7
17

Re-imagine Beyond Technology [e-mail]
3. While the desired menu option is selected, press SEL/INPUT to move to the second level.
4. Use Adjust / Take button Turn Right/ Left to select the second menu option.
5. Press SEL/INPUT to move to the third level: Some menu options require additional steps.
6. Press MENU to return to the previous menu to return to monitor viewing.
5. BBASIC OPERATION
Turning ON & OFF the Monitor
1. First and foremost connect the power cord correctly. The monitor will be in standby or power
ON mode. If the monitor is In standby mode, in order to turn monitor ON, press and hold the
Standby button for at least 3 seconds.
2. Select the input source by using SEL/INPUT button on Keypad in front of monitor.
3. To turn the monitor OFF, press and hold the Standby button for at least 3 seconds.
Volume Adjustment
1. Press the Adjust / Take button Turn Right/ Left button on Keypad.
2. If you want to turn the sound off, press the FUNCTION (Audio mute) button.
3. You can cancel this function by pressing the FUNCTION (Audio mute) or volume control
button.
On Screen Menu Language Selection
- SETUP -> On Screen Display -> OSD Option -> Language
- The menu can be shown on the screen in the selected
languages.
- Supported Languages: English, Spanish, Portuguese, German,
French and Italian
Operating Instructions
SFP-H / SFP-H-7
18

Re-imagine Beyond Technology [e-mail]
6. ON Screen Menu Selection and Adjustmentustment
How to adjust the OSD screen
1. Press the MENU button and then UP/DOWN button to select each menu.
2. Press the SEL/INPUT button and then use UP/DOWN (SEL/INPUT)/MENU button to
display the available menu.
*Some monitors OSD (On Screen Display) may differ slightly from what is shown in this manual.
7. SELECT VIDEO INPUT
How to Select Video Source by OSD
1. Press the SET/INPUT button and then UP/DOWN button to select the desired video
source.
2. Press the SET/INPUT button to go to desired video source.
3. If Input Name is enabled, The SET/INPUT button will display input name as entered in
edit mode.
Operating Instructions
SFP-H / SFP-H-7
19

Re-imagine Beyond Technology [e-mail]
8. MENU OPTIONS FOR DIFFERENT I/P SOURCES
Menu of different Input source
< Video (NTSC) menu> < PC menu> < SDI, HDMI menu>
< Video (NTSC) menu> < PC menu> < SDI, HDMI menu>
Operating Instructions
SFP-H / SFP-H-7
20