Polaris 2882271 User manual

APPLICATION
Verify accessory fitment at Polaris.com.
BEFORE YOU BEGIN
Read these instructions and check to be sure all parts and tools are accounted for.
Please retain these installation instructions for future reference and parts ordering
information.
KIT CONTENTS
This Kit includes:
REF QTY PART DESCRIPTION PART NUMBER
1 1 Fender Bag -
2 1 Screw 7517756
3 2 Washer 7556034
4 1 Nut 7541925
1 Instructions 9927506
TOOLS REQUIRED
• Metric Socket and Ratchet Set
Instr 9927506 Rev 01 2016-06 Page 1 of 2
P/N 2882271
FENDER BAG KIT

Instr 9927506 Rev 01 2016-06 Page 2 of 2
IMPORTANT
Your FENDER BAG KIT is exclusively designed for your vehicle. Please read the installation instructions
thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to
ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
ASSEMBLY TIME
Approximately 5 minutes
INSTALLATION INSTRUCTIONS
1. Place vehicle in “PARK”. Turn key to “OFF”
position and remove from vehicle.
2. Open the fender bag and insert screw wthrough
washer eand install into fender bag base hole q
as shown.
3. Install fender bag qinto cup holder by inserting
screw wthrough the hole in cup holder base.
Install washer eand nut rfrom vehicle
underneath. Tighten until snug.