Polycom SoundStation IP 5000 User manual

Quick Start Guide: Polycom 5000® SoundStation®
IP Phone
Contact Directory
Contacts can be added from Call Lists. Refer to the Call History section for more information.
Add a Contact
1. Press .
2. Select Features > Contact Directory.
3. Press the Add soft key.
4. Enter the contact information. Use the Next and Prev soft keys to scroll between fields.
5. Enter the contact’s first/last name (optional).
6. Enter the contact’s phone number (required).
7. Change the Speed Dial Index (optional). The contact is automatically assigned the next available
number.
8. Set the Ring Type (optional).
9. Press the Save soft key.
Search for a Contact
1. Press .
2. Select Features > Contact Directory.
3. Press the Search soft key.
4. Enter the first few characters of the contact’s first or last name.
5. Press the Search soft key again.

Quick Start Guide: Polycom 5000 SoundStation IP Phone
2
Edit a Contact
1. Press .
2. Select Features > Contact Directory.
3. Scroll to the contact you want to update.
4. Press the Edit soft key and make the necessary changes.
5. Press the Save soft key.
Speed Dial
Place a call using a speed dial index number.
1. Press .
2. Enter the contact’s speed dial index number. If you do not know the index number, scroll to the
contact and press the Dial soft key.
Call History
1. Press .
2. Select Features > Call Lists > Missed , Received Calls , or Placed Calls .
3. Select a call from the list.
4. Choose from the following options:
• Press the Dial soft key to place the call.
• Press the Edit soft key to update the contact number.
• Press the Clear soft key to remove the call from the history.
• Press the Save soft key to store the contact in the Contact Directory.
• Press the Info soft key to view call information.

Quick Start Guide: Polycom 5000 SoundStation IP Phone
3
Call Functions
Place Calls
1. Press .
2. Enter the phone number.
3. Press the Send soft key.
Redial
Press to call the most recently dialed number.
Answer Calls
• Press the Answer soft key.
• Press the Reject soft key to ignore an incoming call.
Note: Enable Do Not Disturb to prevent the phone from ringing.
End Calls
• Press .
• Press the End Call soft key.
Call Hold/Resume
1. Press the Hold soft key during a call. The LED console blinks red.
2. Press the Resume soft key to resume the call.

Quick Start Guide: Polycom 5000 SoundStation IP Phone
4
Transfer Calls
Consulted Transfer
1. Press the Trans soft key during a call. The active call is placed on hold.
2. Dial the party to whom you want to transfer the call.
3. After speaking with the second party, press the Trans soft key to complete the transfer.
Blind Transfer
1. Press the Trans soft key during a call.
2. Press the Blind soft key.
3. Enter the extension of the number to which you want to transfer.
Transfer to Voice Mail
1. Press the Trans soft key during a call.
2. Enter *55.
3. At the prompt, enter the extension of the party to which you want to transfer and press the # key.
Note: Press the Cancel soft key to cancel transfer and resume the call.
Forward Calls
You can configure this feature on the My Phone dashboard. Refer to the Call Forwarding User Guide for more
information. Call Forwarding is not available on shared lines.
Enable
1. Press the Forward soft key from the idle screen.
2. Select a forwarding type: Always, No Answer, or Busy.
3. For No Answer, select the number of rings before forwarding.
4. Enter the number to which calls should be forwarded.
5. Press the Enable soft key.
Disable
6. Press the Forward soft key from the idle screen.
7. Select the forwarding type to be disabled.
8. Press the Disable soft key.

Quick Start Guide: Polycom 5000 SoundStation IP Phone
5
Speaker/Ringer Volume
• Speaker volume – press or .
• Ringer volume – press or while the phone is in idle state.
Mute
1. Press during a call so other parties cannot hear you. The LED console turns red.
2. Press again to disable Mute. This applies to calls using the handset, headset, and speakerphone.
Conference Calls
You can create a conference call with up to two other parties.
• Call the first party.
• After the first party answers, press the Confrnc soft key. The active call is placed on hold.
• Enter the number to the second party.
• Press the Send soft key.
• When the second party answers, press the Confrnc soft key. All parties are now joined in the
conference.
• Choose from the following options:
• Press the Hold soft key to put the conference on hold.
• Press the End Call soft key to end the conference. The other parties remain connected.
• Press the Split soft key to end the conference and split the conference into two separate calls on
hold.
Note: If you have an active call and a call on hold, you can create a conference between all three parties
by pressing the Join soft key.

Quick Start Guide: Polycom 5000 SoundStation IP Phone
6
Voice Mail
An icon on the phone screen, LEDs flashing red, and a stutter dial tone indicate new voice mail messages.
1. Press .
2. Select Features > Messages > Message Center .
3. Press the Connect soft key.
4. Follow the voice and visual prompts on the screen.
Do Not Disturb
You can configure this feature on the My Phone dashboard. Refer to the Do Not Disturb User Guide for more
information.
1. Press .
2. Select Features > Do Not Disturb.
3. Press to toggle it on/off.
Ring Type
You can select different rings to match your preferences and distinguish between calls on lines.
Change Incoming Ring
1. Press .
2. Select Settings > Basic > Ring Type .
3. Scroll to highlight the ring type you want.
4. Press the Play soft key to hear it.
5. Press to select the ring type you want.
Set the Ring Tone for a Specific Contact
1. Press .
2. Select Features > Contact Directory.
3. Press the Edit soft key.
4. Press the Next soft key to scroll through the ring types.
5. Enter a number that corresponds to one of the available ring types.
6. Press the Save soft key.
Note : To exit the screen and find the number associated with the ring type, press twice and select
Settings > Basic > Ring Type .

Quick Start Guide: Polycom 5000 SoundStation IP Phone
Additional Help and Resources
Getting Started with Your Service
To learn how to manage your user account settings and site service features, go to:
https://webexcallingvztraining.verizon.com/
Returning Equipment
Should you require replacement equipment, please refer to the Return Merchandise Authorization (RMA)
quick reference guide located at https://webexcallingvztraining.verizon.com/
Contact Us
Support: 800–287–6235
For questions on other Verizon products: 800–230–9800
© 2016 Verizon. All Rights Reserved. The Verizon name and logo and all other names, logos,
and slogans identifying Verizon’s products and services are trademarks and service marks or
registered trademarks and service marks of Verizon Trademark Services LLC or its affiliates in
the United States and/or other countries. All other trademarks and service marks are the property
of their respective owners.
Version 1.16 July 2016