Pottinger NOVACAT V 10000 User manual

3880.en-US.80X.0
Original operating instructions
Mower combination
NOVACAT V 10000
3880
Machine no.: +..00001

Technical changes
Since we are constantly working on the further development of our products, there may be
deviations between the product and this publication. Therefore, no claims can be derived
from the information, figures and descriptions. For binding information on the specific charac-
teristics of your machine, please contact your service dealer.
Legal information
Please note that only the German operating instructions are the original operating instruc-
tions within the meaning of Directive 2006/42/EC. Operating instructions that are available in
languages other than German are translations of the original German operating instructions.
Please understand that changes to the scope of delivery in terms of form, equipment and
technology are possible at any time.
Reprinting, translation and reproduction in any form, including excerpts, require the written
consent of PÖTTINGER Landtechnik GmbH.
All rights under copyright law are expressly reserved by PÖTTINGER Landtechnik GmbH.
© PÖTTINGER Landtechnik GmbH
MyPÖTTINGER – Easy. Anytime. Everywhere.
• Scan the QR code from the type plate with a smartphone / tablet or enter www.mypoet-
tinger.com on the Internet.
• Spare parts lists are available exclusively via MyPÖTTINGER.
• Individual information, such as operating instructions and maintenance information for
your machines, is available on MyPÖTTINGER in “My Machines” at any time after regis-
tration.
2 | Original operating instructions NOVACAT V 10000 3880.en-US.80X.0

Dear customer,
Quality is value that pays for itself. Therefore, we apply the highest quality standards to our
products, which are continuously monitored by our in-house quality management and by our
management. Because safety, flawless function, the highest quality and absolute reliability of
our machines in operation are our core competencies for which we stand.
These operating instructions are intended to facilitate getting to know your machine, and pro-
vide you with clear information on safe and proper handling, care and maintenance. There-
fore, please take some time to read the instructions.
These operating instructions are part of the machine. They must be kept in a suitable loca-
tion during the entire service life of the machine and must be accessible to personnel at all
times. Instructions on the basis of existing national regulations on accident prevention, traffic
regulations and environmental protection must be added.
All personnel charged with the operation, maintenance or transport of the machine must
have read and understood these instructions, in particular the safety instructions, before
starting work. Failure to follow these instructions will void the warranty.
If you have any questions regarding the contents of these operating instructions or any other
questions about this machine, please contact your PÖTTINGER service partner.
Timely and conscientious care and maintenance according the established maintenance in-
tervals will ensure operational and traffic safety as well as the reliability of your machine.
Only use original spare parts or spare parts and accessories approved by PÖTTINGER
Landtechnik GmbH. Only the original spare parts approved by us have been tested by us
and thus fulfill the suitable prerequisites for use in your machine. If unapproved parts are
used, the guarantee or warranty claim will be lost. Even after the warranty period has ex-
pired, we recommend using original spare parts to ensure the continuous performance of the
machine.
The product liability law obligates the manufacturer as well as the dealer to hand over in-
structions when selling machines and to train the customer on the machine by referring to the
safety, operating and maintenance instructions. A confirmation in the form of a delivery dec-
laration is required to prove that the machine and the instructions have been handed over
properly. The delivery declaration was enclosed with the machine at the time of delivery.
According to product liability law, every self-employed person and farmer is an entrepreneur.
Entrepreneurial property damage is therefore excluded from liability by PÖTTINGER accord-
ing to product liability law. Property damage within the meaning of product liability law is
damage caused by a machine, but not to it.
The operating instructions are part of the machine, therefore hand them over to the new own-
er when passing on the machine. Train the new owner, and refer the owner to the aforemen-
tioned instructions.
Your PÖTTINGER service team wishes you much success.
3880.en-US.80X.0 Original operating instructions NOVACAT V 10000 | 3

Presentation conventions
This section contains explanations for a better understanding of the figures, safety instruc-
tions, warnings and textual descriptions used in these operating instructions.
Safety instructions / warnings
Safety instructions of a general nature are always at the beginning of a section. They warn of
dangers that may arise during operation of the machine or during preparations for work on
the machine. Warnings warn of dangers that may arise immediately during a procedure or
work step on the machine. Warnings are listed together with the respective procedures /
work steps in the instructional text.
Safety instructions and warnings are presented as follows:
DANGER
If the instructions in a text section marked in this way are not followed, there is a risk
of fatal or life-threatening injury.
► Make sure to follow all instructions in such text sections!
WARNING
If the instructions in a text section marked in this way are not followed, there is a risk
of serious injury.
► Make sure to follow all instructions in such text sections!
CAUTION
If the instructions in a text section marked in this way are not followed, there is a risk
of injury.
► Make sure to follow all instructions in such text sections!
NOTICE
If the instructions in a text section marked in this way are not followed, there is a risk
of property damage.
► Make sure to follow all instructions in such text sections!
TIP
Text sections marked in this way contain recommendations and tips for handling the ma-
chine.
ENVIRONMENT
Text sections marked in this way contain information on the topic of environmental protec-
tion.
Directional information
Directional information (such as left, right, front, rear) is given based on the normal “working
direction of travel” of the machine.
4 | Original operating instructions NOVACAT V 10000 3880.en-US.80X.0

Orientation information for a figure of a machine detail, refers to this figure itself and is only
understood as relative to the direction of travel occasionally. The meaning of the orientation
information (if required), is clear from the accompanying text itself.
Designations
In these operating instructions, the existing interchangeable equipment for agricultural vehi-
cles (according to European Directive 2006/42/EC) is referred to as the machine.
Vehicles intended for driving the existing machine are referred to as tractors.
Equipment designated as optional is only offered on certain machine versions or only in cer-
tain countries.
Cross-references
Cross-references to another place in the operating instructions or another document are in
the text, with specification of the chapter and subchapter or section. The name of the sub-
chapter or section is in quotation marks. (Example: Check all screws on the machine for
tightness. See “Tightening torques” on page xxx.) The subchapter or section can also be
found in the document via an entry in the table of contents.
Action steps
An arrow or sequential numbering indicates action steps that should be performed.
A black-bordered indented arrow or sequential indented numbering indicates intermedi-
ate results or intermediate steps that should be performed.
Figures
Figures may differ in detail from your machine and are to be understood as a schematic dia-
gram/symbolic illustration.
Use of colors
Figures in this printed document are shown exclusively in grayscale or black and white.
Figures in electronically distributable documents (PDF) are also displayed in color and can
be printed in color if required.
Use of symbols
Figures may contain additional inserted symbols, arrows and other lines that are used to im-
prove the comprehensibility of the image content, or are intended to draw attention to a spe-
cific area of the image.
3880.en-US.80X.0 Original operating instructions NOVACAT V 10000 | 5

Product delivery instructions
Please check the points listed according to the product liability obligation.
Please mark with a cross where applicable.
Machine checked according to delivery note. All enclosed parts removed; all safety
equipment, cardan shaft and operating equipment present.
Operation, commissioning and maintenance of the machine or device discussed
and clarified with the customer based on the operating instructions.
Tires checked for correct air pressure.
Wheel nuts checked for tight fit.
Correct PTO shaft speed and direction of rotation pointed out.
Adjustment to the tractor performed; three-point adjustment, drawbar height, hand-
brake lever attachment in the tractor cab, forced steering linkage adjusted, compati-
bility of all required electrical, hydraulic and pneumatic plug connections to the trac-
tor checked and established.
Cardan shaft correctly cut to length.
Test run of all machine functions as well as parking brake and service brake per-
formed and no defects found.
Function explanation during test run.
Swinging into transport and working position explained.
Information about desired or additional equipment given.
Information on required reading of the operating instructions given.
A confirmation is required to prove that the machine and the operating instructions have
been handed over properly. For this purpose, you have received a confirmation email from
PÖTTINGER. If you have not received this email, please contact your local dealer. Your
dealer can fill out the delivery declaration online.
Austria
PÖTTINGER Landtechnik GmbH
Industriegelände 1
4710 Grieskirchen
Phone[phone]
Fax[phone]
[email protected]
6 | Original operating instructions NOVACAT V 10000 3880.en-US.80X.0

Change index
Date Index Reason for change Changed chapter
90902021 No time stamp available in Nox-
um
Prototype becoming VS 302
305
305
303
266
3880.en-US.80X.0 Original operating instructions NOVACAT V 10000 | 7

Screw tightening torques factory standard
Screw tightening torques................................................................................................... 16
Design and function
Functional elements.......................................................................................................... 17
Included accessories......................................................................................................... 18
Retrofit program................................................................................................................ 18
At a glance
Labeling............................................................................................................................. 19
Type plate with CE mark............................................................................................. 19
Description
EU - Declaration of Conformity......................................................................................... 20
Intended use..................................................................................................................... 21
Improper use..................................................................................................................... 21
Technical data
Dimensions....................................................................................................................... 22
Weights............................................................................................................................. 22
Basic settings.................................................................................................................... 22
Mower discs and mower blades........................................................................................ 23
Power requirement............................................................................................................ 25
Hydraulic system............................................................................................................... 25
Select Control.............................................................................................................. 26
Power Control / ISOBUS............................................................................................. 26
Electrical system............................................................................................................... 27
SELECT CONTROL terminal...................................................................................... 27
POWER CONTROL terminal....................................................................................... 27
EXPERT 75 terminal................................................................................................... 28
Terminal CCI 1200...................................................................................................... 29
Noise emission.................................................................................................................. 29
Safety and environment
Safety instructions............................................................................................................. 30
Qualification of the personnel............................................................................................ 30
Content
8 | Original operating instructions NOVACAT V 10000 3880.en-US.80X.0

Performing maintenance work.......................................................................................... 30
Organizational measures.................................................................................................. 30
Ensuring operational safety............................................................................................... 31
Special dangers................................................................................................................ 32
Warning signs................................................................................................................... 33
Traffic safety equipment.................................................................................................... 36
Handling hazardous substances....................................................................................... 39
Fuel efficiency and soil protection..................................................................................... 39
Disposal of the machine.................................................................................................... 39
Select Control terminal
SELECT CONTROL terminal overview............................................................................. 41
Input keypad................................................................................................................ 41
SELECT CONTROL operation
Input masks....................................................................................................................... 43
Selection masks................................................................................................................ 45
Structure of the control system......................................................................................... 46
START screen................................................................................................................... 48
Pop-up messages............................................................................................................. 50
Calling up the “WORK” menu............................................................................................ 53
2 SET menu...................................................................................................................... 58
1.1 Front mower - overview......................................................................................... 58
2.1 Display of the lifting height..................................................................................... 59
2.2 Lifting..................................................................................................................... 60
2.3 Cross conveyor belt............................................................................................... 61
Service menu.................................................................................................................... 62
DATA menu....................................................................................................................... 64
Data menu - complete display..................................................................................... 64
Data menu - order display........................................................................................... 65
3 Test menu...................................................................................................................... 67
Test menu 1.1 - job computer...................................................................................... 67
Test menu 1.2 - CAN IO module................................................................................. 68
Test menu 2 - sensors................................................................................................. 69
Test menu 3 - lifting..................................................................................................... 70
Test menu 4 - lateral displacement............................................................................. 72
Test menu 4 - collector................................................................................................ 73
Content
3880.en-US.80X.0 Original operating instructions NOVACAT V 10000 | 9

Test menu 6 - speed signal......................................................................................... 74
Error list....................................................................................................................... 75
Configuration menu........................................................................................................... 77
Configuration menu 1.1 - general................................................................................ 78
Configuration menu 1.3 - serial number...................................................................... 79
Configuration menu 2.1 - factory settings.................................................................... 80
Configuration menu 3.1 - developer mode.................................................................. 81
Configuration menu 4.1 - emergency operation.......................................................... 81
Configuration menu 5 - manual operation................................................................... 82
Configuration menu 5.1 manual operation - side guard folding........................................ 83
Configuration menu 5.2 - manual operation - mower........................................................ 84
Configuration menu 5.3 - manual operation - lateral displacement................................... 86
Configuration menu 5.4 - manual operation - collector..................................................... 88
Configuration menu 6.1 - calibrate lateral displacement............................................. 90
Configuration menu 6.2 - calibrate lifting / lowering..................................................... 91
POWER CONTROL terminal operation
POWER CONTROL terminal overview............................................................................. 94
Input keypad................................................................................................................ 94
EXPERT 75 ISOBUS terminal
EXPERT 75 terminal overview.......................................................................................... 96
Input keypad................................................................................................................ 96
CCI ISOBUS terminal
CCI 1200 terminal overview.............................................................................................. 98
ISOBUS operation
Input masks....................................................................................................................... 99
Selection masks................................................................................................................ 101
Structure of the control system......................................................................................... 102
START screen................................................................................................................... 105
Calling up the “WORK” menu............................................................................................ 107
2 SET menu...................................................................................................................... 113
1.1 Front mower - overview......................................................................................... 113
1.2 Settings for lifting and lowering.............................................................................. 114
2.1 Side guard folding.................................................................................................. 116
Content
10 | Original operating instructions NOVACAT V 10000 3880.en-US.80X.0

2.2 Display of the lifting height..................................................................................... 117
2.3 Lateral displacement............................................................................................. 118
2.4 Adaptive hydraulic relief........................................................................................ 119
2.5 Cross conveyor belt............................................................................................... 121
2.6 Automatic grease lubrication................................................................................. 123
3 Emergency operation............................................................................................... 124
4 GPS.......................................................................................................................... 125
5 Speed signals........................................................................................................... 126
Service menu.................................................................................................................... 128
DATA menu....................................................................................................................... 129
Data menu - complete display..................................................................................... 129
Data menu - order display........................................................................................... 130
Data menu - year display............................................................................................. 133
3 Test menu...................................................................................................................... 134
Test menu 1.1 - sensors.............................................................................................. 134
Test menu 1.2 - mower................................................................................................ 136
Test menu 1.3 - lateral displacement.......................................................................... 137
Test menu 1.4 - collector............................................................................................. 139
Test menu 1.5 - relief................................................................................................... 140
Test menu 1.5 - relief................................................................................................... 142
Error list....................................................................................................................... 143
Configuration menu........................................................................................................... 145
Configuration menu 1.1 - general................................................................................ 146
Configuration menu 1.2 - emergency operation.......................................................... 147
Configuration menu 1.3 - chargeable.......................................................................... 148
Configuration menu 2.1 - calibrate lifting / lowering..................................................... 149
Configuration menu 2.2 - calibrate lateral displacement............................................. 150
Configuration menu 3 - terminal-based manual operation.......................................... 152
Configuration menu 3.1 terminal-based manual operation - side guard folding................ 153
Configuration menu 3.2 terminal-based manual operation - mower................................. 154
Configuration menu 3.3 - manual operation - lateral displacement................................... 156
Configuration menu 3.4 - manual operation - relief........................................................... 158
Configuration menu 3.5 - manual operation - collector..................................................... 159
Configuration menu 4 - serial number......................................................................... 161
Configuration menu 5 - factory setting......................................................................... 162
Flaps / cover / auxiliary equipment
Auxiliary equipment........................................................................................................... 164
Content
3880.en-US.80X.0 Original operating instructions NOVACAT V 10000 | 11

Crossflow tailgate manual operation........................................................................... 164
Protective apron carrier operation............................................................................... 168
Parking supports operation.......................................................................................... 172
Operation
Commissioning.................................................................................................................. 178
Coupling............................................................................................................................ 178
Attachment to the tractor............................................................................................. 179
Connecting the tractor terminal................................................................................... 181
Assembling the SELECT CONTROL terminal............................................................. 181
Assembling the POWER CONTROL terminal............................................................. 182
Assembling the EXPERT 75 ISOBUS terminal........................................................... 183
Assembling the EXPERT 100 (CCI-100) terminal....................................................... 184
Assembling the CCI 1200 terminal.............................................................................. 185
Tractor ballasting............................................................................................................... 186
Determining the tractor ballasting through the weighing method................................ 187
Determining the tractor ballasting through calculation................................................. 189
Setting / conversion........................................................................................................... 190
Lower linkage setting................................................................................................... 190
Prerequisites for commissioning a cardan shaft.......................................................... 194
Disassembling / remounting the conveying cone........................................................ 196
Hydraulic collision protection release force setting...................................................... 198
Rear power lift height position..................................................................................... 199
Hydraulic relief setting, Select Control variant............................................................. 201
Cutter bar position setting............................................................................................ 205
Connecting / disconnecting the connecting lines from the front mower...................... 207
Conditioner (option)..................................................................................................... 207
Roller conditioner settings................................................................................................. 207
Tine conditioner settings................................................................................................... 212
Mowing without conditioner............................................................................................... 217
Assembling the conditioner / swath former....................................................................... 222
Collector (option)......................................................................................................... 224
Cross Flow (option)..................................................................................................... 235
Swath former (option).................................................................................................. 240
Swath comb (option).................................................................................................... 243
Starting work..................................................................................................................... 244
Turning maneuvers on a slope.................................................................................... 245
Reversing.......................................................................................................................... 245
Content
12 | Original operating instructions NOVACAT V 10000 3880.en-US.80X.0

Establishing the working position................................................................................ 246
Mowing........................................................................................................................ 247
Collision protection triggering / resetting..................................................................... 248
Establishing the road transport position...................................................................... 250
Disconnection.................................................................................................................... 252
Disconnecting the cardan shaft................................................................................... 252
Uncoupling the machine from the tractor..................................................................... 253
Removing the CCI 1200 terminal................................................................................ 254
Removing the EXPERT 100 terminal.......................................................................... 255
Removing the EXPERT 75 terminal............................................................................ 256
Removing the POWER CONTROL terminal............................................................... 257
Removing the SELECT CONTROL terminal............................................................... 257
Disconnecting the tractor terminal............................................................................... 258
Decommissioning the machine at the end of the season.................................................. 258
Maintenance
Maintaining operational readiness.................................................................................... 259
General notes.................................................................................................................... 259
Cardan shaft...................................................................................................................... 260
Equipment table................................................................................................................ 261
Condition-based maintenance
Disassembling / remounting the reversible mower blades................................................ 263
Replacing the roller conditioner toothed belt..................................................................... 266
Replacing the roller conditioner belts................................................................................ 266
Replacing the tine conditioner drive V-belt........................................................................ 268
Tine conditioner tines and tine fasteners assembly work.................................................. 270
Tine conditioner rotor tines installation positions.............................................................. 276
Replacing the Crossflow drive V-belt................................................................................ 277
Filling the central lubrication lubricant container............................................................... 279
Setting the cross conveyor belt sensors........................................................................... 280
Predetermined maintenance
Before each season.......................................................................................................... 282
Checking the friction clutch.......................................................................................... 282
Checking the cardan shaft cam clutch......................................................................... 282
Making input gearbox overrunning clutches “run smoothly”........................................ 283
Content
3880.en-US.80X.0 Original operating instructions NOVACAT V 10000 | 13

Daily maintenance............................................................................................................. 283
Checking the hydraulic system.................................................................................... 284
Checking / replacing lighting bulbs.............................................................................. 285
Checking / replacing warning signs, warning triangles, warning foils.......................... 286
Once after 1 hour.............................................................................................................. 287
Checking the seat of the taper bushings..................................................................... 287
Tightening the blade screws........................................................................................ 289
After 5 hours, after 10 hours, then every 20 hours............................................................ 290
Correcting the cross conveyor belt run........................................................................ 290
Once after 8 hours............................................................................................................ 292
Checking / correcting the conditioner drive tension pulley run.................................... 292
Every 20 hours.................................................................................................................. 294
Checking / correcting the Cross Flow belt tension...................................................... 294
Crossflow cleaning...................................................................................................... 295
Every 50 hours.................................................................................................................. 295
Conditioner primary drive cleaning.............................................................................. 295
Roller conditioner toothed belt drive (variant) cleaning............................................... 296
Roller conditioner toothed belt tension........................................................................ 297
Lubricating the roller conditioner roller bearings.......................................................... 298
Mower blade holder wear check.................................................................................. 299
Lubricating the Crossflow............................................................................................ 302
Lubricating the roller conditioner................................................................................. 302
First after 50 hours, then every 100 hours........................................................................ 303
Checking / correcting the roller conditioner V-belt tension.......................................... 303
Every 100 hours................................................................................................................ 305
Roller conditioner cleaning.......................................................................................... 305
Changing the roller conditioner gear oil....................................................................... 305
Every 150 hours................................................................................................................ 307
Lubricating the cutter bar drive shafts......................................................................... 307
Every 300 hours................................................................................................................ 308
Cutter bar oil change................................................................................................... 308
Changing the roller conditioner gear oil....................................................................... 309
Changing the Crossflow input gearbox oil................................................................... 311
Changing the mower input gearbox oil........................................................................ 313
Changing the cutter bar input gearbox oil.................................................................... 316
1x annually........................................................................................................................ 319
Checking / filling up the cutter bar oil level.................................................................. 319
Checking / filling up the Crossflow input gearbox oil level........................................... 322
Content
14 | Original operating instructions NOVACAT V 10000 3880.en-US.80X.0

Checking / correcting the mower input gearbox oil level............................................. 323
Checking / filling up the cutter bar input gearbox oil level........................................... 325
After each season (winter storage)................................................................................... 327
Cleaning / preserving the machine.............................................................................. 327
Every 4 years.................................................................................................................... 328
Checking / refilling the hydraulic pressure accumulator.............................................. 328
Every 6 years.................................................................................................................... 329
Replacing the hydraulic hoses..................................................................................... 329
Lubrication schedules....................................................................................................... 330
Operating fluids
Operating fluid specification.............................................................................................. 332
Operating fluids and fill quantities..................................................................................... 332
Advice and support
Cardan shaft cam clutch function...................................................................................... 334
What to do if ..................................................................................................................... 334
Lighting........................................................................................................................ 334
Conditioner blockages................................................................................................. 335
Removing Cross Flow blockage.................................................................................. 339
Select Control emergency operation........................................................................... 341
Power Control emergency operation........................................................................... 343
Vibrations during mowing operation with the tine conditioner..................................... 345
Schedules
Electrical system............................................................................................................... 347
Select Control.............................................................................................................. 347
Power Control.............................................................................................................. 349
Hydraulic system............................................................................................................... 354
Select Control.............................................................................................................. 354
Power Control.............................................................................................................. 357
Supplement to the USA / CANADA operating instructions
USA / CANADA English warning signs............................................................................. 359
Safely towing loads........................................................................................................... 365
Content
3880.en-US.80X.0 Original operating instructions NOVACAT V 10000 | 15

Screw tightening torques
This factory standard applies to all metric screws for which no special tightening torque is
specified in the drawing/instructions. The respective strength class can be seen on the screw
head.
• The values specified are nominal values and apply to a head friction coefficient of
IJ=0.14 and a thread friction of IJ=0.125. Slight deviations of the clamping force due to
different friction coefficients may occur. The values listed must be observed with a toler-
ance of ± 10%.
• If the specified tightening torques are used and the friction coefficients used are present,
the screw material is stressed to 90% of the minimum yield strength according to DIN
ISO 898.
• If a special tightening torque is specified for a screw connection, all of these screw con-
nections must be tightened with a torque wrench and the specified tightening torque.
Metric thread Strength class 8.8 Strength class 10.9
Tightening torque Clamping force Tightening torque Clamping force
M 4 3,1 Nm 4000 N 4,4 Nm 5700 N
M 5 6,2 Nm 6600 N 8,7 Nm 9300 N
M 6 10,5 Nm 9300 N 15 Nm 13000 N
M 8 25 Nm 17000 N 36 Nm 24000 N
M 10 50 Nm 27000 N 70 Nm 38000 N
M 12 86 Nm 39500 N 121 Nm 56000 N
M 14 135 Nm 54000 N 195 Nm 76000 N
M 16 215 Nm 75000 N 300 Nm 105000 N
M 20 410 Nm 117000 N 580 Nm 164000 N
M 24 710 Nm 168000 N 1000 Nm 237000 N
M 30 1400 Nm 270000 N 2000 Nm 380000 N
M 8 x 1 27 Nm 18700 N 38 Nm 26500 N
M 10 x 1.25 53 Nm 29000 N 74 Nm 41000 N
M 12 x 1.25 95 Nm 44500 N 130 Nm 63000 N
M 14 x 1.5 150 Nm 60000 N 210 Nm 85000 N
M 16 x 1.5 230 Nm 81000 N 320 Nm 115000 N
M 20 x 1.5 460 Nm 134000 N 650 Nm 189000 N
M 24 x 2 780 Nm 188000 N 1090 Nm 265000 N
Screw tightening torques factory standard
16 | Original operating instructions NOVACAT V 10000 3880.en-US.80X.0

Functional elements
Name and function
Pos. Element Function
1 Mounting frame Attachment to the tractor / base for hydraulic system
and electrical system.
2 Parking supports -
front
Parking the machine without a tractor.
3 Inner guard Protection against foreign objects flying away.
4 Front guard
5 Outer guard
6 Tine conditioner / roll-
er conditioner / Cross-
flow / Collector
Options for conditioning the mowed material and swath
merging as required.
7 Hydraulic working
width adjustment
Manual and optional automatic curve and slope com-
pensation.
8 Boom Foldable carrier of the mower units with integrated re-
lief and collision protection.
8 Rear warning signs
with lighting
Lighting equipment for driving on public traffic areas,
depending on country of destination.
9 OI box Contains the operating instructions, spare parts list and
delivery declaration.
10 Parking supports -
rear
Parking the machine without a tractor.
11 Warning signs - rear -
with lighting
Lighting equipment, depending on the legal require-
ments in the country of destination
Without
figure
Swath former / addi-
tional swath former
Can be retrofitted for the formation of higher / narrower
swaths without conditioning.
Without
figure
High cut skids Can be retrofitted on the underside of the cutter bar for
more distance between the knives and the ground.
TIP
Elements with designations such as “left” and “right” are present on both sides of the ma-
chine.
Design and function
3880.en-US.80X.0 Original operating instructions NOVACAT V 10000 | 17

Included accessories
• 1 set of spare V-belts for each Crossflow unit. The V-belts are packed in the discharge
of the screw conveyor of both Crossflow units.
• Operating instructions, spare parts list and delivery declaration (1)
• Knife box (2)
Retrofit program
The retrofit program of PÖTTINGER Landtechnik GmbH offers a wide range of retrofit op-
tions. Your service dealer will be pleased to provide you with further information.
Design and function
18 | Original operating instructions NOVACAT V 10000 3880.en-US.80X.0

Labeling
Type plate with CE mark
T = Type plate position
Type plate
Before an inquiry about the machine or technical issues, read the model and type from the
type plate and have it ready. Chassis no. and/or serial no. are absolutely necessary for or-
dering spare parts.
CE mark
The CE mark on the type plate confirms the conformity of the machine with the provisions of
the machinery directive (version valid at the time the machine was placed on the market).
Data included
The following data can be read on the type plate, depending on the machine type and de-
sign.
Data Data
Chassis number Year of manufacture
Model Model year
Vehicle identification number Axle loads per axle
Type Drawbar load
Serial number Permissible total weight
Base weight
At a glance
3880.en-US.80X.0 Original operating instructions NOVACAT V 10000 | 19

EU - Declaration of Conformity
Description
20 | Original operating instructions NOVACAT V 10000 3880.en-US.80X.0