Prevue Hendryx 31991 User manual

CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL cus omerservice @ prevuepe .com
31991—04/20—A4 Ma e in China for Prevue Pet Pro ucts, Inc., 224 N Maplewoo Ave, Chicago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
Instructions online at www.prevuepet.com
1PIECES
2PIECES
1
2
3
4
5
Add the back panel to the tri-panel mesh. Start at the bottom
and weave the alternating hooks together up the seam.
Done correctly, the seam
will look like this →
Weave the other seam together using the same method.
31991
Bird Home
ASSEMBLY
MODEL #
DETAIL OF INSIDE BACK, RIGHT CORNER
Place the removable grille into
the base and slide the removable
tray into the opening.
Set the assembled mesh into the base.
Hook the side panels up under the
extended plastic tabs along the rim of
the base.

31991 — 04/20— A4 For more won erful cages, toys, an accessories for cats, bir s, chickens, rabbits, ferrets, ogs an small animals, visit www.prevuepet.com
3PIECES
4PIECES
Assembly completed. {
SNAP THE TWO-PIECE
CUPS TOGETHER
Assemble the two-
piece cups. Hold
the hinged cup door
up and insert a cup
into place.
Be cautious when
closing the door—
keep it from snap-
ping down onto
the cup.
Install perches on
a vertical wire, and
set the bottom to
rest on a horizontal
wire for stability.
hen, catch the roof on the tabs along the front
and back panels. Finish with catching the rooftop
on the tabs at the opposite end.
Starting on one end, catch the roof on the
tabs along the side.
Hook the swing onto the roof before
adding the roof panel to the cage.
*CLEANING INS RUC IONS
o prolong the life of your
new Prevue Pet Products
cage, we recommend:
→When cleaning the cage
and parts, use a soft cloth
or non-abrasive scrub
pad (such as Prevue’s
Cage Saver (#109)).
→Wash all parts with warm
water and a mild, pet-safe,
environmentally friendly
soap.
→Rinse thoroughly.
→Hand dry all parts
completely with a soft dry
cotton cloth before
reassembling the cage.
→Do not leave plastic parts
in the sun to dry as they
may warp.