Prevue Hendryx FERRET DELIGHT 431 User manual

CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [e-mail]
431— 04/19— USL Ma e in China for Prevue Pet Pro ucts, Inc., 224 N Maplewoo Ave, Chicago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
TOOLS : Allen wrench (included) • For est results, follow Assem ly Steps in the order presented.
× 4 (long)
× 4 (long)
× 4 (long)
× 4
KEY:
F = Front parts
B = Back parts
LS = Left side parts
RS = Right side parts
RAIL = Stand rails
S = Storage shelf
FG = Floor grilles
R = Roof
T = Tray
1PIECES
]Ls1]Rs1
]S
Ra}i}lLS
Ra}i}lRS
Ra}i}lF
Ra}i}lB
]Fg1
]B1
]F1
Slide the lower side
panels into place.
Note: Orient the tracks
at the top and facing
in. Secure the panels
with one long screw
in each ottom corner.
Attach the shelf to the leg rails
with long screws. Note: Position
the wind ell lock to face out.
Fully insert rolling casters
into each frame leg.
Slide the floor grille down into
place. Note: Fg1does not have
any inset doors.
Insert posts on the lower front and ack panels
into the leg frames. Note: The lower panels
have openings at the top corners.
Attach the grille/tray rails with the long
screws. Note: Orient the rail with the open
end facing the front.
3PIECES
2PIECES
Ferret Delight
431
Instructions online at www.prevuepet.com
MODEL #

7PIECES
431— 04/19 —USL For more won erful cages, toys, an accessories for ogs, cats, bir s, chickens, rabbits, ferrets an small animals, visit www.prevuepet.com
Assem ly completed. {
First, insert the upper
panels into place.
Next, secure them together
with a long screw in each
corner.
Note: Each corner screw
secures the intersection of
the three panels.
Slide the floor grille (with
the remova le hatch door)
into place.
6.1 Remove the door cover. 6.3 Clip the platform/
ramp units onto the
cage in the lower
and upper levels.
6.4 Hook the remaining
ramp onto the loops
at the mid-level floor
opening.
6.2 Snap the ramps onto the
underside of the platforms.
Secure the grille with a
short screw on each side.
Set the roof panel
(with inset sliding door)
into place.
Secure the roof in place
with short screws.
Rotate the wind ell
lock up and slide the
tray into place.
Add the hammock.
First, slide the upper side
panels into place. Next,
secure the panel intersections
with long screws at all corners.
× 4 (long)
× 2 (short)
× 2
× 3
× 2 (short)
× 8 (long)
]R
]T
4PIECES
5PIECES
6PIECES
]B2
]F2
]Ls2]Rs2
]Fg2