Prevue Hendryx 4601 User manual

5...
6...
7. . . 8...
9...
10...
FRIEND ME!
4601— 10/17—USL.1 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800 243-3624 • customerservice @ prevuepet.com
For successful assembly of your MODEL #4601 Duplex Rabbit Hutch
Follow this bunny trail
LEVEL = GOOD!
NOT LEVEL = NOT GOOD
READTHESEI STRUCTIO S!
If you’ve never followed instructions before, this is a good time to start!
These tips have been compiled to lead you to a successful assembly. e know
you can do this!
If you still run into trouble, you can call our Prevue Customer Service line
at 1 [phone].
FI DALEVELSURFACE
Build your hutch on a flat surface and, with a friend, carry it to the location
where it will be used. Assembling the hutch on the flattest surface available
will help you greatly when squaring up panels and aligning the roof panels.
FI DAFRIE D (orGOIT ALO E—both are OK)
If you follow these steps, hutch assembly will be easy for one person. But you may
find a second person’s assistance useful in some steps.
If you have to move the assembled hutch to its final location, you will most certainly
need assistance to protect the integrity of the structure.
COU T CO TE TS OFHARDWARE PACKETS
After unpacking all components, count the contents of the screw packets.
Compare the counts against the Parts List on the next page. There should be
at least one spare for each packet. If any packets are short, please contact
Prevue or use your own appropriate-size replacements.
READ!
READ!
READ!
1
2
3
4EASY AS 1-2-3 !

CARE ADVISORIES
For successful assembly of your MODEL #4601 Duplex Rabbit Hutch
Follow this bunny trail
4601— 10/17—USL.2 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800 243-3624 • customerservice @ prevuepet.com
5
CUSTOMER SUPPORT
Please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [e-mail]
These instructions are online, under the item’s
detail listing at www.prevuepet.com.
For the comfort and health of your rabbit, this hutch size is
most appropriate for 1 small to medium size rabbit or 2
dwarf rabbits.
•
hen moving the hutch, remember the ramp is on a hinge
and will dangle down below the base when the hutch is
lifted off the ground.
To maintain the longevity of your purchase, we recommend that you
periodically treat it with a non-toxic sealant and protect it with a tarp
or other covering during extended periods of inclement weather.
For more wonderful cages, toys, and
accessories for dogs, cats, birds, chickens,
rabbits, ferrets and small animals, visit
www.prevuepet.com

CUSTOMER SUPPORT
Please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [e-mail]
MODEL #4601 Duplex Rabbit Hutch
PARTSLIST
4601— 10/17—USL.3 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800 243-3624 • customerservice @ prevuepet.com
]B
]D
]F
]E
]H
]A]C

CUSTOMER SUPPORT
Please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [e-mail]
MODEL #4601 Duplex Rabbit Hutch
PARTSLIST
HARDWARE
I CLUDED:
TOOLS
REQUIRED:
4601— 10/17—USL.4 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800 243-3624 • customerservice @ prevuepet.com
Screwdriver
or power drill
with
Phillips head
end/bit
P1
1⁄"L (40mm)
16 pcs +1
(use All in Step 1)
P2
1⅜"L (35mm)
10 pcs +1
(use All in Step 3)
P3
1"L (25mm)
28 pcs +1
(use All in Step 3)
P4
⁄"L (14mm)
4 pcs +1
(use All in Step 2)
]M1
]N2
]N1
]N3
]N4
]M2
]L2
]L1
]K1
]K2
]O
]G
]J
]I

Duplex Rabbit Hutch
Model: #4601 Instructions online at www.prevuepet.com
4601— 10/17—USL.5 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800 243-3624 • customerservice @ prevuepet.com
CUSTOMER SUPPORT
Please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [e-mail]
1Assemble the HUTCH BODY.
You will nee these pieces:
× 8
Begin wit t e sides and t e
lower back panel.
Attac t e side panels to t e
back panel wit [P1] screws,
using t e pre-drilled starter
oles as guides.
Next, attac t e upper back
panel in t e same manner.
PLEASE READ:
Work on a
level surface.
Keep corners
an e ges
square up.

× 4
4601— 10/17—USL.6 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800 243-3624 • customerservice @ prevuepet.com
1...contin ed
2Assemble the HUTCH
COMPONENTS. You will
nee these pieces:
× 8
T e front panels feature pre-installed wood dowels
to elp position t e panels correctly for t e utc
floor tray.
Align t e dowels wit t e pre-drilled companion oles
and insert, pressing t e panels toget er.
From t e frame exterior, attac t e side panels to
t e front panels wit [P1] screws, using t e pre-drilled
starter oles as guides.
RU WAY RAMP
Place t e runway ramp
in position and attac it
to t e side panel wit
[P4] screws.
Cutaway view

4601— 10/17—USL.7 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800 243-3624 • customerservice @ prevuepet.com
2...contin ed
SUPPORTBAR
Insert t e support bar
into t e olders. T is
will provide support for
t e floor tray.
Cutaway view
ROOMDIVIDER
HUTCHFLOOR
TRAY
Slide t e room divider panel
down into place.
Insert t e floor tray.
When the floor tray is in place, the
trap door can be closed to separate
the upper and lower levels.

4601— 10/17—USL.8 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800 243-3624 • customerservice @ prevuepet.com
3Assemble the ROOF. You will
nee these pieces first:
Center t e front and back roof panels over
t e utc . Catc t e blocks (on t e underside
of t e roof) onto t e top of t e utc frame.
Tip t e panels toget er and align t em wit
your ands so t ey are flus at t e peak and
also side-to-side.
Tip t e left side and rig t side roof
panels into place.

4601— 10/17—USL.9 For more wonderful cages, toys, and accessories for dogs, cats, birds, chickens, rabbits, ferrets and small animals, visit www.prevuepet.com
3...continue
For the ROOF TRIM, you will
nee these pieces:
★
Your utc is now
fully assembled and
ready for use.
× 28
× 4
× 6
Lay t e roof trim pieces in position.
Using t e pre-drilled oles as guides,
attac t e trim wit [P3] screws.
Using t e pre-drilled oles,
attac t e entire roof unit to t e
utc frame wit [P2] screws.
Lay t e roof cap in position over t e
peak and attac wit [P2] screws.