Prevue Hendryx 41730 User manual

CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL customerservice @ prevuepet.com
41730 — 10/21— A4 Ma e in China for Prevue Pet Pro ucts, Inc., 224 N Maplewoo Ave, Chicago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
Instructions online at www.prevuepet.com
1PIECES
2PIECES
41730 Beijing Keet/Tiel Cage
ASSEMBLY
MODEL #
Prepare the base by placing the
grille down into the base and
sliding the tray in from the front.
SIDES: Insert the extended wire loops
at the bottom of the cage bo y into the
slots on the base.
F ONT/BACK: Along the back and
front rims of the base, position the
bottom wires between the outer base
wall and the inner raised tab.
Insert the mi level roof down
over the central portion of the
cage body.
Hook the top inner horizontal
wire under the loop on the
cage body to hold the midlevel
roof in place. (Two in front,
two in back.)

41730 — 10/21— A4 For more won erful cages, toys, an accessories for cats, bir s, chickens, rabbits, ferrets, ogs an small animals, visit www.prevuepet.com
3PIECES
Assembly completed. {
*CLEANING INST UCTIONS
To prolong the life of your
new Prevue Pet Products
cage, we recommend:
→When cleaning the cage
and parts, use a soft cloth
or non-abrasive scrub
pad (such as Prevue’s #109
Cage Saver).
→Wash all parts with warm
water and a mild, pet-safe,
environmentally friendly
soap.
→inse thoroughly.
→Hand dry all parts
completely with a soft dry
cotton cloth before
reassembling the cage.
→Do not leave plastic parts
in the sun to dry as they
may warp.
1
Center the peak roof on the
cage and, starting from the
side, hook the horizontal
wire at the roof bend under
the loops on the cage body.
2
Pull the roof across the peak
and catch the other side onto
the remaining loops.
1
• The shorter perch fits front-to-back.
• The longer perch fits side-to-side.
Insert the perches on vertical wires,
and settled down onto a horizontal wire
for stability.
For each two-piece cup,
push the hood of the cup
down onto its base.
Slide the cup doors up and
insert the cups.
[2
4PIECES