Prevue Hendryx Deluxe User manual

7501—11/19 — A4.1 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
COMPONENTS:
KEY:
RT = Roof Top panel
F = Front panel
R = Right Side panel
L = Left Side panel
B = Back panel
BT = Base tray
7501 (3 Level) Deluxe C t Home
PARTS LIST
MODEL #
Instructions online at www.prevuepet.com
]Bt
]Rt
]L2
]L1
]B2
]B1
]F2
]F1
]R2
]R1
“T” Clips
4 pcs
“+” Clips
4 pcs
B se Clips
8 pcs
C sters
4 pcs
Connector
R ils
8 pcs
CUSTOMER SUPPORT
Please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL c stomerservice@prev epet.com
These panels are
interchangeable:
]R2 = ]L2
]R1 = ]L1
⁕

7501 (3 Level) Delux C t Home
ASSEMBLY
MODEL #
Instructions online at www.prevuepet.com
7501—11/19 — A4.2 For more wonderful cages, toys, and accessories for dogs, cats, irds, chickens, ra its, ferrets and small animals, visit www.prevuepet.com
NO TOOLS REQUIRED • For best results, follow the Assembly Steps in the order presented.
CUSTOMER SUPPORT
Please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL c stomerservice@prev epet.com
INTERIOR
EXTERIOR
4
Turn the base over
and insert the rolling
casters.
4 (connector rails)
Stand the side panel and
back panel in place.
Slide a connector rail down
over the two-panel seam
until the tops are flush.
[See Fig. 2.1 and Fig. 2.2]
Note: The flat surface of
the connector rail faces
the exterior. The rounded
surface faces the interior.
The four bottom panels have
short horizontal bars near
the lower edge. Panels L1
and R1 are interchangeable.
[ FIG. 2.2 ]
Showing Fig. 2.1 as
viewed from above
[ FIG. 2.1]
KEY:
RT = Roof top
F = Front
R = Right
L = Left
B = Back
BT = Base Tray
1PIECES
2PIECES
]Bt
]L1
]R1
]F1
]B1
interchangeable
Thin vertical wires face the interior.
Thick horizontal wires face the exterior.
⁕
It may be helpful to have
an assistant for assembly.
⁕
Continue around the cage,
adding the side and front
panels and linking panels
together with connector
rails.

7501—11/19 — A4.3 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
3PIECES
4PIECES
4 (connector rails)
CLICK
Starting from the right side, align
the R2 panel directly over the lower
panel, using the tabs as guides.
Link the panels together by
pressing down at the middle (apex)
of the wire clips.
Align the B2 panel directly over the
lower panel, using the guide tabs.
Slide a connector rail down over the
two-panel seam, to link R2 and B2
panels together.
Continue around the cage, adding
the side and front panels and
linking panels together with the
connector rails.
Lay the roof panel over the top.
Weave the loops over – under –
over all along the rim.
For example: From the side, the center
loop will hook UNDER the horizontal
wire. The loops to the left and right will
hook O ER the top horizontal wire.
]L2]R2
]F2
]B2
interchangeable
Second tier panels feature guide
tabs along the bottom edges.
⁕
]Rt

Assembly completed. {
7501—11/19 — A4.4 For more wonderful cages, toys, and accessories for dogs, cats, irds, chickens, ra its, ferrets and small animals, visit www.prevuepet.com
5PIECES
CLICK
“T” clips connect
the intersections
along the front &
back top edge.
“+” clips connect
the intersection
of panels on the
front and back.
Base clips connect
cage to base. Hook
the “claw” end onto
the short horizontal
wire. Press yo r
th mb into the
dimple and press
down ntil it clicks
into the slot on the
cage base.
Place the platforms at the positions illustrated
here for best results. For secure attachment
and a stable platform, press the tabs down onto
the cage wires until they click. Hammocks may
be placed anywhere.
“T” clips DO NOT connect to
the roof p nel. There is a safe
gap between the roof and the
cage panels. The “T” clip is not
designed to bridge this gap.
⁕
4 (“T” clips)
4 (“+” clips)
2
1
8 (base clips)
6PIECES
Add a connector clip at each panel intersection,
pressing each down until they click and all
surfaces are flush.