Prevue Hendryx Charming Aviary Flight Cage XL User manual

CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [e-mail]
F037—11/23— A4.1 M de in Chin for Prevue Pet Products, Inc., 224 N M plewood Ave, Chic go IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
Instructions online at www.prevuepet.com
F037
MODEL #
]R6
]R5
]R1
]R2
]R3
]R4
]T
]G
Hex crew
12 pcs + 1
Hex key
(included)
Phillips-head screwdriver
(not included)
optional Adjustable wrench
(not included)
mall slotted screwdriver
(not included)
Long screw + nut
3 sets
hort screw + nut
8 sets + 1
Tray Handle
+ two screws
HARDWARE
INCLUDED:
TOOL :
KEY:
= OOF piece
G=G ILLE
T=T AY
B=BACK panel
F=F ONT panel
S=SIDE panel
SF = SIDE F AME rail
These parts are
interchangeable:
R1 = R2
R3 = R4
Spanels are all
the same
Sf 1 = Sf 2
Sf 3 = Sf 4
Sf 5 = Sf 6
⁕
FOOD / WATER CUP
PERCHE
TOY HOOK BAR
Charming Aviary Flight Cage XL
PART

F037—11/23— A4.2 For more wonderful c ges, toys, nd ccessories for c ts, birds, chickens, r bbits, ferrets, dogs nd sm ll nim ls, visit www.prevuepet.com
CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [e-mail]
Instructions online at www.prevuepet.com
F037
MODEL #
]B
]F
]S4
]S3
]S2
]S1
]Sf 1]Sf 2
]Sf 3
]Sf 4
]Sf 5]Sf 6
CA TER
Charming Aviary Flight Cage XL
PART

CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [e-mail]
F037—11/23— A4.3 M de in Chin for Prevue Pet Products, Inc., 224 N M plewood Ave, Chic go IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
Instructions online at www.prevuepet.com
1PIECES
Charming Aviary Flight Cage XL
A EMBLY
MODEL #
F037
Follow the Assembly Steps in the order presented for best results.
2PIECES
interchangeable
face tray channels into cage interior
]Sf 1
]B
]T
]F
]Sf 2
x 4

F037—11/23— A4.4 For more wonderful c ges, toys, nd ccessories for c ts, birds, chickens, r bbits, ferrets, dogs nd sm ll nim ls, visit www.prevuepet.com
3PIECES
Slide the side p nels
down through the
channels along the
frame legs.
Orient the side p nels
so the door is on the
exterior.
Gently lay the assembled
unit on its side. Insert the
c sters fully into the holes
in the leg frames.
Insert the
extended wires
down into the
holes along the
frame rail.
Add the middle side fr me r ils
to the top of the panels; insert
the extended wires into the rail
holes, and; attach the rails with
hex screws.
4PIECES
the middle Sf rails have holes
on top and bottom of the rail
orient the
rails so the
holes are on
the exterior-side
of center
]S1
]S2
interchangeable
interchangeable
]Sf 3
]Sf 4
x 4
CA TER (4)
TIP: Use a Phillips-head
screw driver and mallet to tap
the casters into position.

F037—11/23— A4.5 M de in Chin for Prevue Pet Products, Inc., 224 N M plewood Ave, Chic go IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
5PIECES
6PIECES
]S3
]G
]T
]S4
interchangeable
interchangeable
]Sf 5
]Sf 6
x 4
FOOD / WATER CUP (4)
PERCHE (3)
TOY HOOK BAR (1)
Slide the side p nels
down through the
channels along the
frame legs.
Add the top
side fr me r ils
to the top of the
panels; insert the
extended wires into
the rail holes, and;
attach the rails
with hex screws.
Slide the grille on the top
of the tray channels, with
the heavy front-to-back
wires facing down.
Slide the tr y into the
tray channels.
Insert perches
on vertical rails,
and resting on
horizontal rails
for stability.
Hang cups
centered under the
cup doors, with
hooks over the
horizontal wires.
Hook the toy hook b r ends
onto horizontal rails, front-
to-back.

F037—11/23— A4.6 For more wonderful c ges, toys, nd ccessories for c ts, birds, chickens, r bbits, ferrets, dogs nd sm ll nim ls, visit www.prevuepet.com
7PIECES
TO ASSEMBLE:
1
Slide the sleeved strip of the
side roof p nel over the single
strip on the b ck roof p nel,
and align the holes.
2
Attach the roof panels together
with short screw-and-nut pairs.
Use a wrench or pliers on the nut
to fix the screws tightly in place.
3
Assemble all roof panels
together. After all panels have
been assembled, retighten
the screws/bolts over all.
This Blow-Up diagram
shows the arrangement
of roof panels and parts.
]1
]R1
]R2
interchangeable
]R3
]R4
interchangeable
x 8 sets
]2
]3

F037—11/23— A4.7 M de in Chin for Prevue Pet Products, Inc., 224 N M plewood Ave, Chic go IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
7...continued
]R5
]R6
x 3 sets
The tapered roof c ps finish off the roof;
one on top and one on the interior.
Flip the top c p upside-down on the floor
and insert long screws up from the bottom.
Ask for help from a friend or assistant, if needed.
C refully turn the assembled roof upside-down,
center it on the roof cap, and set it down.
Slip the interior cap over the exposed long
screws and tighten the nuts down to secure
the cap in position.
top cap is longer, and
tapered on all edges
inside cap is shorter, and tapered
only on the long edges
end view

7...continued
F037—11/23— A4.8 For more wonderful c ges, toys, nd ccessories for c ts, birds, chickens, r bbits, ferrets, dogs nd sm ll nim ls, visit www.prevuepet.com
With your friend, carefully turn the assembled
roof upright and set it on the cage.
C refully reach under the roof line and catch
the tabs on the roof 1in the brackets along the
frame rails and 2under the rail.
side view
see-through view
Assembly completed. {
]1
]2