Prevue Hendryx F030 User manual

Aviary Cage
Model: #F030
Instructions online at www.prevuepet.com
F030— 02/17—USL.1 M de in Chin for Prevue Pet Products, Inc., 224 N M plewood Ave, Chic go IL 60612 USA • www.prevuepet.com • 1 [312] 243-3624 • customerservice @ prevuepet.com
1To assemble the BASE, you
will need these pieces:
2To add the ROLLING CASTERS,
you will need these pieces:
continued...
Note: The tray/gr ll tracks at the
BACK stop before the back leg.
Al gn the extended center w re
on the back panel w th the hole
on the s de panel frame leg.
Attach panels together w th
a long hex screw at the bottom.
Leave the top screw out unt l
later n the assembly.
Complete the base assembly
n the same manner, attach ng the
panels only at the bottom.
The rolling casters
can be added at any po nt
n the cage assembly.
Carefully t p the cage
on ts s de.
Fully nsert the post
of the casters nto
the holes n the base
of all four frame legs.
• TOOLS: An allen wrench is
included; You will need a pair
of sturdy pliers.
• A small bottle of touch-up
paint & brush are included
For assistance or replacement, please
contact Prevue:
TOLL-FREE 800.243.3624
ONLINE www.prevuepet.com
EMAIL [e-mail]
× 4
read first REVIEW BEFORE ASSEMBLY
× 4 ( lon screws )

F030— 02/17—USL.2 For more wonderful c ges, toys, nd ccessories for dogs, c ts, birds, chickens, r bbits, ferrets nd sm ll nim ls, visit www.prevuepet.com
3To assemble the UPPER CAGE,
you will need these pieces:
To finish, you will need
these pieces:
Sl de the side panels
onto the frame posts.
Attach the back
panel w th long
hex screws at the
top and bottom
corners of the
panel.
Al gn the extended
w res on the back
panel w th the
holes on the s de
panel frame ra ls.
× 4 ( lon screws )
× 4 ( lon screws )
Before add ng the top front panel,
t’s a good t me to add the perches.
Al gn the extended w res on the front panel
w th the holes on the s de panel frames, and
attach w th long hex screws n the top and
bottom corners.
At th s po nt, check and t ghten ALL
screws over the ent re cage to ensure
a safe and stable home.
⁕
continued...

F030— 02/17—USL.3 For more wonderful c ges, toys, nd ccessories for dogs, c ts, birds, chickens, r bbits, ferrets nd sm ll nim ls, visit www.prevuepet.com
4
5To install the ROOF, you will
need these pieces:
To install the COMPONENTS,
you will need these pieces:
Food/water cups:
Hook the cups onto the hor zontal w re
under the doors on the s de panels.
Grille and tray:
Sl de the grille nto the top channel and
the tray nto the bottom channel.
× 4
× 4 ( lon screws )
Lay the V-shaped roof beam, centered, across
the peak. Lay the roof mesh, centered, on top.
Hook the roof onto the loops along the top edge
of the front and back panels. (See f g.5.2)
Secure the roof w th short screw + washer
pa rs n e ght places along the roof frame.
f g.5.3
f g.5.2
f g.5.1
× 8 pair