Prevue Hendryx 529BLUE User manual

KEY:
M = Mesh
B = Base
C = Clips
P = Platform
R1 = Ramp (long)
R2 = Ramp (short)
529 BLUE—06/22—A4 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
Set the mesh into the
base. Align the mesh
between the inner tab
and the outer rim.
Hook the clip onto the
cage mesh, between the
two vertical wires.
Swing the clip down and
clip it onto the base.
It is installed correctly
when it “clicks” into
place.
clickclick
OOLS NEEDED : Pliers for crimping • For best results, follow Assembly Steps in the order they are presented.
]M
]B
]C
Fold all panels down to form a rectangle.
Loop the hooked wire ends over the extended side-panel wires.
Crimp the hooks over the
wires in all the corners to
secure the mesh closure.
529BLUE Adult Ferret Home
/Tra el Carrier
Instructions online at www.prevuepet.com
CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [e-mail]
1PIECES
2PIECES
MODEL #

529 BLUE—06/22—A4 For more wonderful cages, toys, and accessories for cats, irds, chickens, ra its, ferrets, dogs and small animals, visit www.prevuepet.com
Assembly completed. {
]P1
]R1
]P2
]R2
Link the long ramp onto
the hooked posts on the
underside of the platform.
Link the short ramp onto the
remaining platform.
Install the second platform higher
than the first, bridging the platforms
with the ramp.
Hook the platform tabs
over the mesh wire, front
and back.
CLEANING:
o prolong the life of your
new Prevue Pet Products
cage, we recommend:
→When cleaning the cage
and parts, use a soft cloth
or non-abrasive scrub
pad (such as Prevue’s #109
Cage Saver).
→Wash all parts with warm
water and a mild, pet-safe,
environmentally friendly
soap.
→Rinse thoroughly.
→Hand dry all parts
completely with a soft dry
cotton cloth before
reassembling the cage.
→Do not leave plastic parts
in the sun to dry as they
may warp.
3PIECES