Prevue Hendryx Southbeach Collection/FlatTop User manual

CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL customerservice @ prevuepet.com
21006 (FLATTOP) — 03 /20 — A4 Made in China for Prevue Pet Produ ts, In ., 224 N Maplewood Ave, Chi ago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet. om • ustomerservi e @ prevuepet. om
Instructions online at www.prevuepet.com
1PIECES
2PIECES
21006 Southbeach Collection/FlatTop
ASSEMBLY
MODEL #
Place the removable grille into
the base and slide the removable
tray into the opening.
Along the front and back edges, set the
mesh between the raised tabs and the rim.
Set the mesh into
the base and insert
the extended loops
along the sides of
the mesh into the
open slots on the
base.
Unfold the mesh to
form 90° corners.

21006 (FLATTOP) — 03 /20— A4 For more wonderful ages, toys, and a essories for ats, birds, hi kens, rabbits, ferrets, dogs and small animals, visit www.prevuepet. om
*CLEANING INS RUC IONS
o prolong the life of your new Prevue Pet Products cage, we
recommend:
→When cleaning the cage and parts, use a soft cloth or
non-abrasive scrub pad (such as Prevue’s Cage Saver (#109)).
→Wash all parts with warm water and a mild environmentally
friendly, pet-safe soap.
→Rinse thoroughly.
→Hand dry all parts completely with a soft dry cotton cloth before
reassembling the cage.
→Do not leave plastic parts in the sun to dry as they may warp.
3PIECES
4PIECES
Assembly completed. {
SNAP THE TWO-PIECE
CUPS TOGETHER
Assemble the two-piece
cups. Hold the hinged cup
door up and insert a cup
into place. Be cautious when
closing the door—keep it from
snapping down onto the cup.
Install perches on
a vertical wire. Set
the bottom to rest
on a horizontal wire
for stability.
Starting on one end, catch the roof on the looped
hooks along the side. hen, catch the roof on the
hooks along the front and back panels
Finish with catching the rooftop on the hooks at
the opposite end.