PROAIM CINEMA Series User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
3 x Ground Feets
3 x Telescopic Legs
Cyrus Pro Mitchell Hi-Hat (HT-CYRP-01)
Cyrus Pro Hi-Hat Mitchell
6 x Ratchet Knobs

2
 Loosen the knob of Cyrus Pro Mitchell Hi-Hat
and remove its low Hi-Hat legs.
NOTE: It is Set of 3" legs which directly mounts
to Mitchell's head for low hi-hat shots .
Cyrus Pro Mitchell Setup
 The low Hi-Hat legs of Cyrus Pro Mitchell
Hi-Hat are now removed, as shown in the
image.
 Join the telescopic legs to Cyrus pro-Mitchell
Hi-Hat with the help of the ratchet knob.
NOTE: It has 3 secons of extendibility to oer
variable height which are secured with
Aluminum knobs.
 Loosen the rst Aluminum knob to increase
the height of the telescopic legs, as shown in
the image.
 Tighten the ratchet knob properly, as shown in
the image.
NOTE: Proaim Hi-hat’s extendable legs oer
quick adjustments to level it on any uneven
Surface.
 Now, loosen the second knob to increase the
height and ght it properly.

3
 The height of the Cyrus Pro-Mitchell is now
increased, as shown in the image.
 Aer posioning the ground feet, secure
them with the help of the Ratchet knob by
ghtening the knob properly, as shown in the
image.
 Loosen the ratchet knob of Cyrus Pro Mitchell
Hi-Hat and stretch the Hi-Hat legs according
to your requirement.
 The Cyrus Pro Mitchell Hi-Hat legs are now
appropriately stretched, as shown in the
image.
 Use the ratchet knob to posion the ground
feet on the Cyrus Pro Mitchell hi-hat.
 Remove the foot from the telescopic legs by
loosening the ratchet knob.
Remove Foot from Telescopic Legs

4
 Mount the uid head on Cyrus Pro Mitchell Hi
-Hat and ghten it with the help of the castle
ring.
 The image shows that the uid head is now
properly mounted on the Cyrus Pro Mitchell
Hi-hat.
 To x the foot in the opposite direcon, insert
the foot screw.
NOTE: With the Cyrus Pro Mitchell Hi-Hat, you
can also place the foot on the opposite side.
NOTE: This fully adjustable design provided an
easy leveling on an uneven surface and it
rotates 360°.
Camera Setup
 Slide the plate and remove it by pressing the
buon on the uid head.
 Attach the foot to the Cyrus Pro Mitchell
Hi-hat, as shown in the image.

5
 Proaim Cyrus Pro Mitchell Hi-Hat setup is
ready to use.
 Now mount the bowl adapter (100mm)
(Not-Included) on Cyrus Pro Mitchell Hi-Hat
as shown in the image.
Cyrus Pro Conguraons

6
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.
YOUR PROAIM CYRUS PRO MITCHELL HI-HAT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)