PROAIM CINEMA Series User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is
listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assembly Manua l
Cam Tower Stand w/ Counterbalance
Accessory Tray
Plaorm Secon-2 with Locking Pivot Wheels
Plaorm Secon -1 with
Locking Pivot Wheel
Camera Support Plaorm
Cam Tower Stand w/ Counterbalance
(P-CTST-01)

2
1x Spanner (Size:-17mm)
2 x Screws 2x Allen Key T-Type
(Size:-3/16”,4mm)
•Loosen all the screws of the platform
section-1, as shown in image.
Proaim Cam Tower Stand w/ Counterbalance Setup
•Now all the screws have been removed.
•Assemble the platforms together using the
screws and secure them with the spanner.
•Now attach the platform section-2 with the
platform selection-1.
Plaorm Secon-2 with Locking Pivot Wheels
Plaorm Secon -1 with Locking Pivot Wheel

3
•Now make it stand upright on its wheels.
•Now mount the tower stand on the platform
rod.
Cam Tower Stand w/ Counterbalance
•Secure the tower stand with the help of
provided Allen key.
•Aach the support plaorm to the counter
balance column of the Cam tower stand.
•Screw it with the help of the Allen key.
•Remove the screws from the boom of the
counterbalance column.
Camera Support Plaorm

4
•Now place the accessory tray with the counter
balance column, as shown in the image.
•Add screws to the accessory tray and secure it
with the Allen key.
•The tray is now properly aached.
•Attach your camera (Not Included) to support
platform and secure it by the rotating knob.
•Now open the crank lever of the support
platform.
•Rotate the crank of the support platform rod.
Accessory Tray
Camera Support Plaorm

5
•Open the knob of the counterbalance to ad-
just the height of the support plaorm and
secure it by closing the knob back again.
YOUR PROAIM CAM TOWER STAND W/ COUNTERBALANCE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.