PROAIM CINEMA Series User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Assembly Manua l
Boom Shelf
Soundchief Cart | Vercal Workstaon (CT-SDCF-01)
Top Shelf

2
20” Pneumac Wheels
9” Dovetail Wheels
Speed Rail Crossbar
4 x Speed Rail Clamps
2 x Handles 4 x knobs & washer
for Speed Rail
3 x Shelf knobs
Feature: The push and pull wheel brake
system enables you to securely halt the
movement of the wheels.
Soundchief Cart Setup
• Unlock the 9” dovetail wheel’s lever and
insert the wheel by sliding into the cart
boom base and ghten it properly.
• Repeat the same process for the second 9”
dovetail wheel.
9” Dovetail Wheels Assembly

3
• Assemble the top shelf onto the boom
shelf ensuring a proper t.
• Insert the shelf knobs from both sides and
ghten them securely.
NOTE: Top shelf can be mounted onto the
boom shelf from both sides.
• Aach this wheel to the side of the cart and
secure it by ghtening the bolt using a
spanner.
• Repeat the same process for the second 20"
Pneumac wheel.
• Insert the bolt into the center of the 20"
wheel and then insert the bush from the
opposite side, as shown in the image.
20” Pneumac Wheels Assembly
Top Shelf Assembly
• Loosen the knob of the Speed Rail Clamp
and remove both the knob and the washer.
Speed Rail Clamps & Crossbar Assembly
• Insert the handle into the top or boom
part per your requirement.

4
• Slide the Speed Rail Clamp into the crossbar
and insert both the knob and washer.
NOTE: Ensure that you slide the Speed Rail
Clamp from the at side.
• Aach the crossbar to the Cart by matching
the threads.
• Now, insert the knob and ghten it.
NOTE: Aach the curved side of the Speed
Rail Clamp to the cart; otherwise, the folding
shelves will not close properly.
• Repeat the same process to insert the
Speed Rail Clamp on the other side of the
crossbar.
• Aer inserng the knob, securely ghten it.
• Extend the collapsible side wings by pulling
them up.
• Repeat the same process to insert the
clamp on the other side.
NOTE: The Cart features two vercal poles at
the back for holding a crossbar to mount
mulple monitors.

5
• Aach the single speed rail clamp to the cart
by aligning their threads, then insert the
speed rail knob and ghten it securely.
• Insert the speed rail through the speed rail
clamp holes and ghten it properly using the
speed rail clamp knob.
NOTE: Adjust the handle posion according to
your requirement.
• Open the rail clamp by turning the handle to
the le, then connect it to the speed rail.
• Secure it by moving the handle towards the
right. Repeat the same process for the other
side.
Handle Assembly
• Aer opening the shelf, be sure to secure it
by locking it.

6

7
YOUR PROAIM SOUNDCHIEF CART VERTICAL WORKSTATION
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.