PROAIM DL-SPIN-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Proaim Spin Doorway Dolly
Proaim Track Wheels for Spin
Dolly (SPN-TRK-WS)
Proaim Wheel Axle
for Spin Dolly
4mm 10mm 13mm
Accessories
Spin Lightweight Doorway Dolly (DL-SPIN-01)
Ass e mb l y M a n u a l

2
 Loosen the knob on either rear side of dolly.
Insert both Handle Bar together & ghten the
knobs to secure them.
Spin Dolly Setup
 Insert push bar handle into Rear-Wheel
Steering and lock it with the provided pin.
 Hold hex nut with 13mm wrench & loosen the
steering rod bolt with 4mm allen key to
remove the allen bolt from dolly.
 Then remove the bolt (as shown) with the
help of 10mm allen key and detach the front
secon of dolly.
 Remove bolts on Pneumac wheels with
provided 4mm allen key and detach the
wheels.
Converng 4x4 Steering into 2x2
 Insert the wheel axle in dolly & screw it
ghtly. Then aach the wheel and ghten it
properly.

3
YOUR PROAIM SPIN LIGHTWEIGHT DOORWAY PLATFORM DOLLY
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
 Remove the knob to aach track wheels.
 Now aach Track wheels. Re-insert knob and
ghten it properly. Follow the same steps on
the other side of the dolly.
Track Wheels Setup