
Leggere attentamente le istruzioni prima di installare il vostro Cucù.
Il vostro orologio a cucù è uno strumento delicato atto alla misurazione del tempo 
e va trattato con estrema cura e delicatezza. Il movimento del cucù è dell’azienda 
tedesca Engstler produttrice di cucù classici e nota per la qualità dei suoi prodotti.
Ogni orologio viene testato per almeno 24H e controllato in ogni suo aspetto prima 
di essere imballato e spedito. Tutti gli orologi che lasciano il nostro magazzino 
sono integri e perfettamente funzionanti.
Non toccare mai l’uccellino con le mani ne quando è dentro e, soprattutto, quando 
è fuori perché questo compromette il meccanismo che controlla il movimento 
dell’uccellino. Non applicare o spruzzare qualsiasi prodotto sull’orologio perché 
questo pregiudica la scorrevolezza dell’uccellino sulla sua guida. Non tenere il 
cucù in ambienti polverosi. Non far ruotare le lancette troppo velocemente ma con 
lentezza e delicatezza. 
Progetti non risponde di malfunzionamenti causati dall’errata installazione o da un 
utilizzo non corretto dell’orologio. 
Messa in funzione del Cucù
Posizionare le lancette sulle ore 12.
Togliere lo schienale.
Inserire 2 batterie mezza torcia facendo attenzione alla polarità.
Riposizionare lo schienale.
Regolare l’ora girando le lancette dei minuti in senso orario. E’ importante fer-
marsi ogni volta che la lancetta dei minuti passa sulle ore 12 ed attendere che il 
cucù canti e batta i colpi dell’ora.
In caso l’orologio batta i colpi non corrispondenti all’ora (es. batte 2 colpi e le lan-
cette segnano le nove), per rimetterlo in fase è sufficiente portare la lancetta delle 
ore sulle due.
L’intensità del suono è regolabile con l’interrutore che si trova sul retro dell’orologio.
Un sensore sensibile alla luce ferma automaticamente la suoneria in assenza di 
luce.
Le batterie debbono essere cambiate quando l’uccellino farà fatica ad uscire.
A volte, a causa di un colpo preso durante il trasporto, l’uccellino si incastra nella 
sua sede. Per sbloccarlo, dopo avere tolto le batterie e messo le lancette su mez-
zogiorno, estrarre con delicatezza l’uccellino utilizzando delle pinzette. Rimettere 
le batterie e il cucù funzionerà perfettamente. 
Please read the instructions carefully before installing your cuckoo.
Your cuckoo clock is a delicate instrument suitable for measurement of time and 
should be treated with extreme care and delicacy. Cuckoo clock movement is 
made by the German company Engstler manufacturer of classic cuckoo and well 
known for the quality of its products. Each clock is tested at least 24H and con-
trolled in every aspect before being packed and shipped. All clocks that leave our 
warehouse are undamaged and fully functional.
Never touch the bird when it is inside and, especially, when it’s outside because 
this compromises the mechanism that controls the motion of the bird. Do not apply 
or spray any product on the clock because this will affect the bird’s movement. Do 
not hold the cuckoo in dusty locations. Do not turn the hands too quickly but 
slowly and gently. 
Progetti shall not be liable for malfunctions caused by incorrect installation or incor-
rect use of the clock.
Operating instructions Cuckoo-clock
Turn the minute hand clockwise till it points to 12 o’clock.
Remove back panel.
Insert two C cell batteries as inticated in battery holder. Pay attention to + and -.
Replace the back panel.
Turn the minute hand clockwise, round and round till the clock tells the correct 
time. Important: let the cuckoo strike every full hour.
If the time is not corresponding with the number of Cuckoo strikes please proceed 
as follows: if the Cuckoo strikes twice turn the hour hand to two. If the Cuckoo 
strikes nine times turn the hour hand to nine.
At the left side of the clock you will find a switch for the sound: “max”, “min” and 
“off”.
The Cuckoo strike is switched of automatically during the night controlled by a light 
sensor.
The batteries must be exchanged if the bird does not come out or if the clock is 
slow.
Sometimes, due to a shock taken during the transport, the bird stucks into his slide. 
To unlock it, after removing the batteries and put the hands at noon, gently pull the 
bird using a tweezers. Put the batteries and the cuckoo will works perfectly.