Provision ISR PT-737 Operating and maintenance instructions

NITTO]
Quick Installation Manual

Quick Installation Manual
g:
iOS
Quick
installation
Guide:
P2-P6
.
'W'
Android
Quick
installation
Guide
P7-P11

Provision-ISR PnV IP Camera
iOS Quick installation Guide:
Power Socket LAN Socket
6s Plug Camera to LAN and Power Supply:
a. Connect the camera to an AC power source using the provided power supply.
b. Connect the camera to a router with internet access using the provided network cable.
Make sure that the green/yellow network indicators are on
c. Wait for the camera to finish initializing (Around 20 seconds).

@ Install iPhone Application “ProvisionPnV” :
a. Install the free “ProvisionPnV” application from Apple App Store.
b. After installation completes — Open the application:
6 Add your camera/s:
a. Inthe opened screen press “Add Camera”
b. Scan the QR code on the back of the camera , input the password and press “done”
O Camera +
Place a QR Code inside the
viewfinder rectangle to scan it.
(ms Add Ge |
Camera Add Camera Dane PT-127 PnP IP CAMERA
User:admin Password: BB8B8B
Mame
P2rCam
Change
camera
s
name
UID @
Password
Gancel
Input Password (Default:888888) Point the camera towards the QR code
The camera will recognize it automatically
Notes:
a You may change the name of the camera in this stage.
= itis highly recommended to change the password after first installation. In order to change the default
password go to the “Password Setting” under the camera settings menu.
a you can also serch for camera by click “serch” This will automatically find all the cameras available on
your network

© Congratulations!!
The camera is now added to your iPhone. Press on it in order to view it.You may perform some
additional setup actions described below in order to enhance the functionality of the camera.
Please note:
= In case that you notice flickering image go to the camera setting and change the “View mode” to 50/60
KHz ERE to the electricity system in your country.
the image from the camera is blurry, rotate the lens outer ring in order to focus the image. = Incasethat

& Additional Setup:
In order to access the setup menu press the right arrow and then “camera setting”.
ail PES = 1223 33%
Camera
Camera
Seth
ng
PT camara Camera Setting
connect failed Î
; | | WiFi Setting >
| Password Setting >
| Tima Satting >
| Alarm Setini +
a. WiFi Setting: Here you may connect the camera to a wireless internet network in order to
free the camera from using the wired LAN connection.
i. Goto “WiFi Setting” in the settings menu.
ii. The camera will automatically search and display the available WiFi networks. Please
allow the search process to complete. The process of searching may take up to 20
seconds.
iii. Choose the desired network and enter the network password in the following screen.
sal PERA = 16:23 B4 E3} al PERS = 15:23 BS, ES}
Camera Setting WIFI Setting wir Sette Input password nere
Password |
SSID
| provisioniari
Choose WiFi
provisionisri

b. Local SD card installation: You may add and configure a micro SD card for local video
recording.
i. Insert a micro SD card to the designated slot (Maximum capacity 32GB)
ii. Go to the “SD setting” in the settings menu.
iii. Press “SD Format” and confirm in the following Prompt.
Important note: Make sure that SD status is showing “SD Card Recording”.
SD
Status
an
card
lécardihe
| Sure to formatthe SD card?
| | [ancas ‘fata | be chelated al. The
SD Format 1. + | torm; tiing oper tion takes about 20
7 Ti F —}> È Sand elresh the pace
Recard | afte
| Cancel
Loop rewrite V|
+ Mecording lime |
c. Time Settings: In order to have the correct time stamp on the camera live view and
recorded files, you must set the camera’s clock:
i. Inthe camera settings press on “Time Setting”
ii. Inthe next menu switch “Sync With Local Time” to On. It will update the time
of the camera and switch back to off automatically.
PETITE 17:50 65% Bh
Camera Settings Time Setting Done
| Gamera time Thir 15 Aug 2013 17.4...
Time zone {SMT 198200} Boir- >
Sync with server €x @
| n . '
NTP Server time.nist.cov >
Syne with ecel time

Provision-ISR PnV IP Camera
Android Quick installation Guide
Power Socket - LAN Socket
CL Plug Camera to LAN and Power Supply:
Connect the camera to an AC power source using the provided power supply.
= D
b. Connect the camera to a router with internet access using the provided network cable.
Make sure that the green/yellow network indicators are on
c. Wait for the camera to finish initializing (Around 20 seconds).

@ install Android Application “ProvisionPnV” :
a. Install the free “ProvisionPnV” application from Google Play Store.
b. After installation completes — Open the application:
6 Add your camera/s:
a. In the opened screen press “Add Camera”
b. Scan the OR code on the back of the camera , input the password and press “done”
w" n
Pa ProvisionPny
EER 7 BE
E: Pleas? tap here to add new camera D Place a QR Code inside the
viewfinder rectangle to scan it.
Add Camera
PT-737 PnP IP CAMERA
User:admin Password: 888888
UTD: VSTC1I111 1HPCRY
SN : adxym
Hame IPCamera Change camera Ë name
Cancel
Input Password (Default:888888)
Point the camera towards the QR code
The camera will recognize it automatically
Notes:
" You may change the name of the camera in this stage.
= Itishighly recommended to change the password after first installation. In order to change the default
password go to the "Password Setting” under the camera settings menu.
= you can also serch for camera by click “serch” This will automatically find all the cameras available on
your network
ES ©: l

@ congratulations!
The camera is now added to your Android. Press on it in order to view it. You may perform some
additional setup actions described below in order to enhance the functionality of the camera.

E Additional Setup:
In order to access the setup menu press the right arrow and then “camera setting”.
| Back IPCAM Setting
Echt Camera
Edit Camera
Delete
“ai Check ihe ocal images Liliana
zii Mudily Password
View Camera TF Video
Alarm Setting
Alarm n
Time Setting
SD Setting
a. WiFi Setting: Here you may connect the camera to a wireless internet network in order to
free the camera from using the wired LAN connection.
i. Goto “WiFi Setting” in the settings menu.
ii. The camera will automatically search and display the available WiFi networks. Please
allow the search process to complete. The process of searching may take up to 20
seconds.
iii. Choose the desired network and enter the network password in the following screen.
Beck
IPGAM
WiFi
Setting
Done
Pravisiñnisr WiFi no ña Aree
WiFi Safe ADAZ PBK: AEE)
WiFi Signal 01%
ET ipcam Wifi Setting
provisionisr] Connected
WiFi Safe WPA PSkLAES)
W Fi Manager
Wil i Manager
ChneMet= NM dr
Fl sale WPA_FSKITKIPY
WiFi Signal RA
en | [Shew Password
Provisionismew
IFI sale WPA PAKIAFS)
WiFi signal TUE
ChinaMe:-Hiiar

b. Local SD card installation: You may add and configure a micro SD card for local video
recording.
i. Insert a micro SD card to the designated slot (Maximum capacity 32GB)
ii. Go to the “SD setting” in the settings menu.
iii. Press “SD Format” and confirm in the following Prompt.
À Back! SD card Setting
40 iial capacity MB):
SD remain ng capac ty(MB;'-
SD status: SO card inserted
Record coverage
Timar r2cerding: [|
c. Time Settings: in order to have the correct time stamp on the camera live view and
recorded files, you must set the camera’s clock:
i. In the camera settings press on “Time Settings”
ii. In the next click “Sync With The Phone” to On. It will update the time zone of the
camera to match the time of the phone
Back IPCAM Time Setting
Carrera Time Wedd? Julz073 12:06:26 UTC
limevone (GMT +08:00)Beijing, € A
Syne with WTF Server «|
NTF Server time.nist.gov É
suce with the phone

PROVISION ISR}
Now you can see!
Download link to PC Video Player:
1) Direct link:
www_provision-isr.com/P&V_CMS/P&V_ CMS.zip
2) QR Code:

Now You CAH je
http://www.provision-isr.com