4
ONE Flow has snooze (for the alarm), kitchen and sleep timers. To set a timer up, press Options
and select Alarm or timer.
Using the snooze, kitchen and sleep timers
Setting the clock
The clock will automatically set itself using your network or a digital radio signal. However, if you
cannot receive an updated time signal, or see the message ‘Time not available’, the time and date
can be manually set by selecting Set Clock from the Alarm or timer menu. Use the select dial to
adjust the time and date. Press or to move to the previous or next setting.
Setting the sleep timer
The sleep timer switches your radio into standby after a set period of time. From the Alarm or timer
menu, select Sleep timer. Use the Select dial to adjust the length of the sleep timer in 15 minute
steps from 15 mins to 1 hour 30 mins. Press Save to store.
A set sleep timer is indicated by in the icon bar.
Setting the kitchen timer
The kitchen timer sounds a beeping tone after a set period of time.
From the Alarm or timer menu select Kitchen timer and use the Select dial to adjust the length of
time. Press mins to toggle between minutes and hours. Press Save to confirm.
A set kitchen timer is indicated by in the icon bar.
Cancelling a sounding timer
To cancel a sounding alarm or timer, push either the Select or Volume dial. A sounding alarm will
automatically cancel after 1 hour.
Warning: when powered by ChargePAK E1, pressing Standby switches the radio off and any
set alarm or timer will not sound.
Setting the Snooze timer (for alarms only)
From the Alarm or timer menu, select Snooze time. Use the Select dial to adjust the duration of
the snooze from 5 to 15, then either 20/25/30/40 minutes, or 1 hour.
00:15
Sleep timer (hh:mm)
OKClear Save Menu
00:45
Kitchen timer: set mins
Clear Save Hours
