Pyxis SP-360 User manual

SP-360 Handheld Fluorometer - Fluorescein
Operation Manual
Rev. A
Firmware version 1.xx

1General Description
1.1 Specification
Fluorescein
Measurement Range
0 to 600 ppb
Excitation Wavelength
470 nm LED
Emission Wavelength
520 nm
Wavelength Accuracy
±1 nm
Resolution
0.1 ppb
Accuracy
±1% for > 50 ppb, 0.1 ppb for < 10 ppb
Calibration Solution Point
0, 50, 250 and 500 ppb
Others
Battery
9V alkaline battery
Typical Battery Life
3200 reading (480mAh battery)
Display
320x240 TFT-LCD, visible under direct sunlight
Dimension
L160 W74 H33 (mm)
Weight
310g (without battery)
Temperature Range
40 to 106 ℉(4 to 41 ℃)
Humidity
85% at 106 ℉(41 ℃)
Environmental
IP67, dustproof and waterproof
⚫
⚫
•
•
•

•
•
•
•
Figure 1 Light Shield in the Open Position

MEASUREMENT
Fluorescein
Calibration Info
360.0 ppb
＞
＜OK Key Functions
Keys

MEASUREMENT
Zero Slope Exit
FLUORESCEIN CALIBRATION
Insert DI Solution
Press Zero Button

MEASUREMENT
Cycle Slope Exit
FLUORESCEIN CALIBRATION
Insert DI Solution
Click Zero Button
Insert 50 ppb Solution
√
Click Slope Button
Press cycle to choose solution
MEASUREMENT
Cycle Continue Exit
FLUORESCEIN CALIBRATION
Insert DI Solution
Click Zero Button
Insert 50 ppb Solution
√
Click Slope Button √
Calibration Succeed
Press Continue to Proceed

MEASUREMENT
Cycle Slope Exit
FLUORESCEIN CALIBRATION
Insert 50 Solution
Click Slope Button
Insert 250 ppb Solution
√
Click Slope Button

MEASUREMENT
Cycle Slope Exit
FLUORESCEIN CALIBRATION
Insert 50 Solution
Click Slope Button
Insert 250 ppb Solution
√
Click Slope Button
Calibration Succeed
Press Continue to Proceed
√
MEASUREMENT
Cycle Slope Exit
FLUORESCEIN CALIBRATION
Insert 250 Solution
Click Slope Button
Insert 500 ppb Solution
√
Click Slope Button

√
MEASUREMENT
Cycle Slope Exit
FLUORESCEIN CALIBRATION
Insert 250 Solution
Click Slope Button
Insert 500 ppb Solution
√
Click Slope Button
Calibration Succeed
√

MEASUREMENT
Diagnosis Exit
DEVICE INFORMATION
Serial Number 170001
Hardware Ver 3.0
Software Ver 1.1.1
Software Rev 500
Battery Satus 54%
WiFi SSID SP360-170001
FLRC Calib 500
MEASUREMENT
Factory Reset Exit
DEVICE INFORMATION
[1] 4
[2] 470 [5] 130
[3] 340 [6] 99
[4] 190 [7] 56