Q-See QS458-811-5 User manual

QS458-811-5
QSM1424W Cameras
QS458 DVR
w/ 500GB AV SATA Hard Drive

Main Features
•8 Channel H.264 CIF/D1 DVR
•Eight cameras with 400TVLresolution
•Weatherproof cameras for indooror outdooruse
•40 feet of night vision
•Remote internet monitoring (up to 10 users at thesame
time)
•Mobile Phone Surveillance
•Compatible with MAC and PC
•Free Q-SeeApps for iPhone, iPad, and Androidremote
viewing!
•Receive instant email alerts and snapshot images when
motion is detected
•Zoom in on live or playback footage with 2X digital zoom!

Product Set-up
•Designed for Do It Yourself setup.
•Comes with everything needed to setup
except router for remote access.
•Connect cameras to power supply with splitter
and DVR, connect DVR topower supply,
connect both power supplies to surge
protector and power outlet.
•Uses UPnP for easier IP address and port
forwarding setup

Product ease of use
•Easy DIY setup of cameras and DVR
•Easy to use menu interface
•Mouse and remote included for easy menu
navigation
•UPnP enabled for easier IP address and port
forwarding setup

Where product should be used
•Product can be used anywhere security is
needed, homes, offices, factories, banks, retail
stores, parks, playgrounds, etc.

What’s in the Box
1- QS458 DVR
1- Pre-installedAV Rated 500GBHard Drive
1- 12V Power Adapter for DVR
8- QSM1424WCameras
8- 60ft Video/PowerCables for Cameras
1- 8 Way Power Splitterfor Cameras
1- USB Mouse
1- RemoteControl
1- BNC/RCA Video Cable
1- EthernetCable for DVR

Product Set-up
•Connect BNC/RCA cable toDVR and TV
(can also connect to 19” inch or larger VGA monitor cable not included)
•Connect Mouse to USB port on back of DVR
(can also use remote control)
•Connect 12V adapter to DVR
•Connect cameras to Video/Power cable
•Connect Video/Power cable to 8 way splitter
•Connect 8 way splitter to camera powersupply
•Connect both power supplies to surge protector usingsupplied cables
•Connect surge protector to power outlet
•Turn on power switch on surge protector and back of DVR
•Run Wizard to setup DVR
•After verifying that cameras are working, mount cameras in desired
location

Product spec-DVR1.
Compression– H.264
Operating System - Linux
Video Inputs– 8 BNC
Video Outputs – 1 BNC, 1 VGA
Audio Inputs/Outputs – 1/1
VGA Resolution - 1024x768, 1280x1020
Playback Resolution –CIF 352x240, D1 702x480
CIF Playback Frame Rate – 30
D1 Playback Frame Rate – 6
Record Bit Rate – 128kbps– 2Mbps
Storage - 1 SATA AV Hard Drive up to 2TB
OS support–WinXP, Vista, Win7, Mac OS 10.6/10.7
Browser Support – Internet Explorer, Google Chrome, Firefox
SmartPhone - iPhone/iPad, Android
Simultaneous Remote User’s - 10

Product spec-DVR2.
Power Supply - 110-220 Volt input, 12 Volt 2A output
Power Consumption – 7 Watt (w/o hard drive)
Alarm – None
Alarm Mode – Motion Detection
USB ports – 1 USB 1.1, 1 for mouse, 1 USB 2.0for USB backup (Flash, Hard
Drive)
Network Interface – RJ45, 10/100 mbsp
PTZ Interface - RS485
Multi Function –view live or playback video, record, backup, and view and
backupvideo over the network or Internet at the same time

Product spec-QSM1424W Camera
Weather proof Indoor/Outdoor IP63 rating.
Mounting Bracket - 3 axis
Resolution – 400TVL
Sensor – 1/4 in CMOS color
Lens: 3.6mm (50° to 55° Field of View)
Night Vision - 24 LEDs up to 40 feet
AGC/BLC - Auto
S/N Ratio - >48dB
Power Consumption -<3 Watts (LEDs on)
Power Supply – 12v/500mA
Operating Temperature - 14 to 122°F 95% Humidity
Cable – 60feet Video/Power

FAQ
Question: I am not getting any audio from mycameras, Why?
Answer: The cameras that come with the package do not have built in microphones. If
you want to hear audio from the camera you would need to run a powered
microphone from the camera location and connect it to an audio in port on the
back of the DVR. You will also need to connect an amplified speak to the audio out
port on theDVR to hear the audio onthe DVR.