Qlight SEDLR User manual

SEDLR / SDLR / SMDLR
Thank you for purchasing Q.Light product.
Please read this manual carefully before installing this system
for safe and long use of the product.
▪ Aluminum housing product with long shelf-life.
▪ Excellent in diffusing signal light by employing unique
direct-diffusion system.
▪ Material : Lens-PC, Body-DIECAST AL,
Horn Housing-SUS316L, Reflector-Heat Resisting ABS,
Protection Cage(Option)-SUS316L
▪ RPM : 120-140/Min.(Controllable) ▪ Protection Class : IP56
▪ Volume : SEDLR,SDLR:113-118dB(1m), SMDLR 115-120dB(1m)
▪ Protection Class : IP56
1) SEDLR
▪ Product Specification
Model Rated
Voltage Current Weight RPM Color
DC12V 1.295A 3.09Kg
DC24V 1.052A 3.09Kg
AC110V 0.233A 3.86Kg
SEDLR
AC220V 0.111A 3.86Kg
120-140/Min.
Green-R
Amber-A
Green-G
Blue-B
▪ External View Drawing
2) SDLR
▪ Product Specification
Model Rated
Voltage Current Weight RPM Color
DC12V 1.295A 3.36Kg
DC24V 1.052A 3.36Kg
AC110V 0.233A 4.13Kg
SDLR
AC220V 0.111A 4.13Kg
120-140/Min.
Green-R
Amber-A
Green-G
Blue-B
▪ External View Drawing
3) SMDLR
▪ Product Specification
Model Rated
Voltage Current Weight RPM Color
DC12V 1.255A 5.91Kg
DC24V 0.812A 5.91Kg
AC110V 0.250A 6.68Kg
SMDLR
AC220V 0.145A 6.68Kg
120-140/Min.
Green-R
Amber-A
Green-G
Blue-B
▪ External View Drawing
OPERATING MANUAL
Heavy duty LED Revolving Warning Light with Phone

Type Main Built-in
Sound CH Sound Tone Volume
WS 5 Warning
Sounds
ch1
ch2
ch3
ch4
ch5
Fire A-ANG(Wail)
Emergency WA-U(Yelp)
Ambulance PI-PO(High-Low)
Machinery Fault( PI-PI-PI-)
Foam Release Alarm
(PI~Continuous)
118dB
120dB(M)
WP
5 Special
Warning
Sounds
ch1
ch2
ch3
ch4
ch5
Fire A-ANG(Wail)
Abandon Alarm
Machinery Fault(PI-PI-PI-)
Foam Release Alarm
(PI~Continuous)
General Alarm
(Long PI~+ 7 Short PI.)
118dB
120dB(M)
WM 5 Melodies
ch1
ch2
ch3
ch4
ch5
Sweet Home
For Elise
Cuckoo’s Waltz
Piano Sonata
Turkish March
118dB
120dB(M)
WA 5 Alarms
ch1
ch2
ch3
ch4
ch5
Beep(Intermittent)
Door Chime
Phone Ring
Machinery Fault(PI.PI.PI.PI.)
Tripping Bead Sound
116dB
118dB(M)
WV 3 Voice
Signals
ch1
ch2
ch3
Reproduction of Voice Recording
3 Channels
113dB
115dB(M)
* dB with (M) is for SMDLR
This product has a volume(1) for controlling revolving speed on
assembling board. Refer to above structure drawing together with
below drawing and explanation for
right operating.
1) Lens(Protection Cage) Removal
Remove Protection Cage② and Lens③ from the product by
loosening bolt(M4-4EA)① and make sure assembling board④.
2) Revolving Speed Control
▪ The volume(1) for revolving speed control is built-in this
product. Turn it closckwise for increasing revolving speed and
turn it counterclockwise for decreasing revolving speed.
▪ If give excess power to the volume, it can be broken.
Be careful !
3) Lens(Protection Cage) Assembling
Assemble the lens(or Lens and Protection Cage) in reverse order
of separating.
Refer to structure drawing together with below drawing and
explanation for right operating. Phone control board has sound
tone selection switch and volume controller.
1) Cover Removal
Separate cover⑥ by loosening cover bolt M5 4EA⑤ on the box
of phone control board.
2) Sound Tone Selection
▪ 5 Warning sound tones are built-in this product. In case of
standard product, select preferable sound tone by using internal
sound tone selection switch(S1).
▪ In case of LC Type(Custom-Made) product,refer to the
explanation and drawing in article 7.
3) Volume(dB) Control
▪ Volume controller(S2) is built-in this product. Turn it clockwise
for increasing volume or turn it counterclockwise for decreasing
volume.
4) Cover Assembling
Assemble the cover of phone control box in reverse order of
separating.

Refer to structure drawing together with below drawing and
explanation for right operating.
1) Terminal Box Cover Removal
This product has terminal box for power line connection on the
lower part of body.
▪ Remove cover⑧ and terminal box by loosening cover bolt(M5
4EA) ⑦.
2) Wiring Power Line
▪ Connet power line to terminal plate⑨.
▪ Treat the end of power cable by using “O” or “U” type terminal
for safe wiring.
▪ In case of product using AC voltage, connect the line without
polarity(wire color).
▪ In case of product using DC voltage, black line is negative(-).
■ Wiring for LC(External Contact) Type – Custome Made
▪ In case of LC type which selets sound tone by external
contact, power line and signal line come out. Connect each
line as below.
▪ Power Line : UL1015-NO.16(1.25sq) x 2C 400mm
▪ Signal Line : UL1007-NO.22(0.3sq) 400mm
▪ In case of product using AC voltage, do not allow power
supply either to common line or to signal line..
3) Treating Power Entry
▪ Keep the tightness of power entry⑩ by using water-proof
connector(15C Nipple is supplied as a standard
specification) or cable grand.
▪ Product can be damaged by water or dust if the cable entry is
exposed outdoor without airtightening.
4) Terminal Box Cover Assembling
Assemble terminal box cover in reverse order of separating.
▪ This product is water-proof and anti-corrosion type for
outdoor use. But, install with vertical direction at a place or
machine where exists no big vibration and no strong impact as
long as possible.
▪ Refer to below information and drill necessary mounting holes on
profitable part of the product.
(Make sure PCD from external view drawing.)
▪ Fix the product by using mounting bolt(M8-4EA) for SEDLR &
SDLR and another mounting bolt(M10-4EA) for SMDLR.
▪ This product is explosion-proof, water-proof and anti-corrosion
type. When separate and assemble the product for wiring, repair
or check, keep the airtightnees of the product by tightening each
bolt and nut.
▪ If using voltage is seriously higher or lower than rated voltage, it
can reduce the self-life of the product or can cause a problem
on product operating. Make sure the using voltage does not
exceed +/- 5% of the rated voltage.
▪ If lens or body of the product is contaminated by chemicals such
as thinner, benzene, the product can be damaged, discolored
or deformed. Please be careful.
▪ Keep airtightness of cable entry by using water-proof cable
grand or water-proof connector. Product can be damaged by
water or dust if the cable entry is exposed outdoor without
airtightening
▪ Do not give strong impact to the product. It can be a reason of
part(s) damage or short circuit.
▪ Do not strongly pull the wire out from the product. It can cause a
disorder.
(SEDLR/SDLR)
(SMDLR)

Situation Main Cause Solution
Non- Lighting Partly
LED is Partly Damaged
Supplying Higher Voltage
than Rated Voltage
Making Sure Using
Voltage
Supplying Voltage Lower
Than Rated Voltage
Making Sure Using
Voltage
Feeble Lighting
Low Revolving Speed
Wrong Selecting Voltage
Selection Switch to 220V
(In Case of AC Type)
Selecting Voltage
Selection Switch to
110V
Short Circuit of Sound
Tone Signal Line Making Sure Wiring
Double Sound Tone Problem with Sound
Tone Selection Switch
Contact Q.Light or
Their Agent
Wrong Wiring Making Sure Wiring
No Sound
Problem with Horn Contact Q.Light or Their
Agent
Wrong Wiring Making Sure Wiring
Neither Lighting nor
Revolving No Power Supply Making Sure
Power Supply
Q-LIGHT CO., LTD.
http://www.qlightkr.com
E-mail : [email protected]
Seoul Office (Domestic Sales & A/S)
Tel) 02-2679-6152
Ansung BD A-312, 410-13 Sindorim-Dong, Guro-Gu, Seoul
Overseas Marketing Team / Plant
Tel) 055-328-4082 Fax) 055-328-4083
Plant #1 : 178-1 Woogye-Ri, Sangdong-Myun, Kimhae-Si,
KyungNam, Korea
Plant #2 : 417-1 Geumsa-Dong, Geumjung-Gu, Busan