Qlight SM30 User manual

ww w.qlight.com
SM30 /SM40/SM200/SM400
Thank you for purchasing QLight product. Please read this
manual carefully before installing this product for safe and long
use.
▪High in durability and suitable for warning signal transmission for
vessel, crane, hoist and fire alarm.
▪Standard Body Color: RED-SM30,SM200, SM400, GRAY-SM40
▪Material: DIECAST AL-SM200,SM400.
STEEL-SM30. ABS-SM40.
▪Insulation Resistance: 100MΩ (at 500 VDC)
▪Dielectric Strength: 500V AC, 50/60Hz in 1 minute
▪Protection Class: IP44
▪Operating Temperature: -20℃~50℃
▪ General Specification
Model
Volume
(Max)
Rated
Voltage
Current
Weight
RPM
Rating
SM30
114dB
DC12V
3.23A
0.22Kg
10,000
10min.
DC24V
1.78A
0.22Kg
AC110V
1.34A
0.42Kg
AC220V
1.00A
0.42Kg
SM40
116dB
DC12V
6.78A
0.53Kg
7,000
10min.
DC24V
3.67A
0.53Kg
AC110V
1.00A
0.68Kg
AC220V
0.73A
0.68Kg
SM200
120dB
DC24V
7.82A
2.19Kg
7,200
10min.
AC110V
2.67A
2.55Kg
AC220V
1.49A
2.55Kg
SM400
123dB
DC24V
4.40A
3.19Kg
7,600
10min.
AC110V
4.00A
3.75Kg
AC220V
2.80A
3.75Kg
▪External View Drawing
1) SM30
2) SM40
3) SM200
4)SM400
OPERATING MANUAL
Motor Siren

ww w.qlight.com
Please refer to below chart for power line size per item.
Model
Output power line
SM400
1.25sq
SM200
0.75sq
SM40
0.75sq
SM30
0.75sq
▪In case of product using AC voltage, connect the line without
Polarity(wire color).
▪In case of product using DC voltage, black line is negative(-).
▪Please make a hole by a drill where you need to attach our
product and refer to below picture for a hole size. (Make sure
PCD from external view drawing.)
▪Fix the product by using another bolts and nuts as below.
Model
Bolt, nuts size
Quantity of Bolt, nuts(SET)
SM400
M8
4
SM200
M8
6
SM40
M6
3
SM30
M4
2
▪If using voltage is seriously higher or lower than rated voltage, it
can reduce the self-life of the product or can cause a problem
on product operating. Make sure the using voltage does not
exceed +/-5% of the rated voltage.
▪Do not operate continuously for more than 10 minutes. It can
cause disorder or reduction of shelf-life.
▪If lens or body of the product is contaminated by chemicals such
as thinner, benzene, the product can be damaged, discolored
or deformed. Please be careful.
Situation
Main reason
Solution
Volume
Decreasing
Supplying Voltage
Lower Than Rated
Voltage
Making Sure Using
Voltage
Too high sound tone
than the standard
Supplying Voltage
Higher than Rated
Voltage
Making Sure Using
Voltage
No sound
Problem with Motor
Contact Q.Light or Their
Agent
Wrong Wiring
Making Sure Wiring
No Power Supply
Making SurePower Supply
Caution
Trouble shooting
QLIGHT CO., LTD.
http://www.qlight.com
E-mail : [e-mail]
Overseas Sales Team / Factory
Tel) [phone] Fax) [phone]
185-25 Mukbang-ro Sangdong-Myeon, Gimhae-Si,
Gyeongsangnam-do, Korea
Inquiry for Product and C/S