ramia HB-D1500 User manual

Assembly Instructions - HB-D1500, HB-D1800
Attention:
Workbench is made from high quality beech wood guaranteeing maximum resistance and long service life of the
bench.
NOTICE
•The bench must not be left in damp or humid conditions which will cause movement in the wood. Recommended
humidity level max. 60%.
•If you bought workbench without surface treatment, we recommend you to finish the bench by colourless varnish
or oil including the bottom of workbench. Varnish (oil) prevents absorption of surrounding moisture. Don´t forget to
repeat surface treatment each 6 months.
•To increase the stability of your workbench we recommend you to bolt the bench to the floor.
•Each months tighten all screws and bolts.
Parts Packing 1 Packing 2 Date
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: [phone], fax: [phone], www.ramia.cz

Y
X
1
2
3
4
5
6
7
8
9
10
No. Quantity No. Quantity
1
1
11
4
2
2
12
4
3
2
13
4
4
2
14
4
5
2
15
4
2
1
8
7
1
17
4
8
2
18
28
9
2
19
4
10
2
20
1
Important! Wedges for tool well are supplied separately (part Y). Producer recommends to add wedges after approx. 4
weeks. Workbench needs to adapt to surrounding conditions. In case of
need adjust the size of wedges by size of tool well.
M-12x100 Hex Bolt
M-12 Nut
Hardware
Holes for stretchers if cupboard is used
M-12 Washer
Hex Head x40mm Bolt
5x50mm Wood Screw
Middle Stretchers
Centre Shelf
Vise Face
Glue (not shown)
X Y
Wedges for tool well
Vise Assembly
Handle Ends
Dowels
Vise Handle
Base
Hex Head x30mm Bolt
2
Parts
Bench Top
Front leg with bench dog holes
Back leg
Top Rail support
Bench dogs (not shown)
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: [phone], fax: [phone], www.ramia.cz

Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: [phone], fax: [phone], www.ramia.cz