Razor Monster kix User manual

Monster Kix™and Zombie Kix™Scooters
OWNER’S MANUAL
Read and understand this entire manual before allowing
child to use this product! For assistance contact Razor.
DO NOT RETURN TO STORE.
NOTE: Manual illustrations are for demonstration purposes only.
Illustrations may not reflect exact appearance of actual product.
Specifications subject to change without notice.
Please have your 22 character product I.D. code ready before contacting Razor for
warranty assistance and/or replacement parts.
Product I.D. Code: _____________ - ____________ - ____________
US_131220

1
AN IMPORTANT MESSAGE TO PARENTS:
Razor®Jr products are intended to allow younger children to learn and to
enjoy their early experiences using ride-on toys. Studies suggest that children
at age 3 have the coordination required to use a steering wheel or handlebar
and can use a 3-wheeled scooter, but may not have developed the balance
required to operate 2-wheeled scooters. This ability is expected to develop
with time and experience to where, depending on experience, most children
by the age of 5 have the balance and coordination to use 2-wheeled scooters.
Adult supervision is required as children learn and grow because children do
not understand the risks of riding in areas with cars and are at a very high risk
of falling and injuring themselves.
Parents must instruct child to practice gripping and releasing handlebars
inside of the handlebar decoration prior to first time use. Do not allow child
to ride scooter until child is completely comfortable inserting/removing hands
and firmly gripping handlebars.
This manual contains important information. For your child’s safety, it is your
responsibility to review this information and make sure that you instruct your
child to follow all warnings, cautions, instructions and safety topics. Razor
USA recommends that you periodically review and reinforce the information in
this manual with younger riders and that you inspect and maintain your child’s
Razor Jr scooter to insure their safety.
GENERAL WARNING: Scooter riding can be a hazardous
activity. Certain conditions may cause the equipment to fail without fault of
the manufacturer. Scooters can and are intended to move, and it is therefore
possible to get into dangerous situations and/or lose control and/or fall.
If such things occur you can be seriously injured or die. LIKE ANY OTHER
MOVING PRODUCT, USING A SCOOTER CAN BE A DANGEROUS ACTIVITY
AND MAY RESULT IN INJURY OR DEATH EVEN WHEN USED WITH PROPER
SAFETY PRECAUTIONS. USE AT YOUR OWN RISK AND USE COMMON SENSE.
This manual contains many warnings and cautions concerning the
consequences of failing to maintain, inspect or properly use your Razor Jr
scooter. Because any incident can result in serious injury or even death, we do
not repeat the warning of potential serious injury or death each time such a
possibility is mentioned.
• Do not allow children under age three (3) to use the scooter. Close adult
supervision is required.
• Always pay attention to where your child is going.
• Always wear safety equipment, such as helmet, knee pads and elbow pads.
Always wear a helmet when riding your scooter and keep the chinstrap
securely buckled.
• Always wear closed toe shoes.
• Ride on smooth, paved surfaces without loose debris, such as rocks or
gravel, and away from motor vehicles.
• Avoid sharp bumps, drainage grates, and sudden surface changes as
scooter may suddenly stop.
• Avoid streets and surfaces with water, mud, ice, sand, gravel, dirt, leaves
and other debris. Wet weather impairs traction, stopping, and visibility.
• Do not ride at night or when visibility is impaired.
• Avoid excessive speed associated with downhill rides.
• Obey all local traffic and scootering laws and regulations.
• Watch out for pedestrians.
• The fender over the rear wheel is not a brake. It is meant to prevent shoe
contact with a moving wheel.
• Do not exceed 44 lb (20 kg) total weight on the Razor Jr scooter.
• Rider weight does not necessarily mean a child’s size is appropriate to fit or
maintain control of the scooter.
• A parent’s decision to allow his or her child to ride this product should be
based on the child’s maturity, skill and ability to follow rules.
ACCEPTABLE RIDING PRACTICES AND CONDITIONS
Direct parental supervision is required at all times. Scooters are meant to be
used only in controlled environments, free of potential traffic hazards and not
on public streets. Do not allow your child to ride a scooter in any areas where
vehicle traffic is present. Child must maintain a hold on the handlebars at all
times. Never allow more than one child at a time to ride a scooter. Never use
near steps, sloped driveways, hills, roadways, alleys or swimming pool areas.
PROPER RIDING ATTIRE
Always ensure child is wearing proper protective equipment, such as an
approved safety helmet. A helmet may be legally required by local law
or regulation in your area. A child should always wear shoes, never ride
barefooted or in sandals, and keep shoelaces tied and out of the way of
the wheels. Knee pads and elbow pads are recommended.
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS
FURTHER INCREASES RISK OF SERIOUS INJURY. USE AT YOUR OWN RISK
AND WITH APPROPRIATE AND SERIOUS ATTENTION TO SAFE OPERATION.
USE CAUTION.
WARNING: ALWAYS INSPECT SCOOTER PRIOR TO RIDING. Properly
inspecting and maintaining your scooter can reduce the risk of injury. Always
inspect your scooter before riding and regularly maintain it. Replace worn
parts when they occur.
WARNING: CHECK LOCAL LAWS REGARDING SCOOTER USE.
Check local laws and regulations to see where and how you may use your
scooter legally. In many states and local areas scooter riders are required
BY LAW to wear a helmet. Check local laws and regulations regarding laws
governing helmet use and scooter operation in your area.
Safety Warnings .............................................................................................. 1
Before You Begin.............................................................................................. 2
Assembly Instructions...................................................................................3-4
Scooter Parts.................................................................................................... 5
Check Before Riding......................................................................................... 6
Safety Reminders/Warranty ............................................................................ 7
SAFETY WARNINGS
CONTENTS

2
Need Help? Visit our web site for replacement parts and product support at www.razor.com or call toll-free at
866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time. Please have the product I.D. code (located on the
bottom of the deck) available for better assistance.
Adult assembly required. Remove contents from box. Inspect the contents for scratches in the paint and/or dents that
may have occurred during shipping. Because your scooter was partially assembled and packed at the factory, there
should not be any problems, even if the box has a few scars or dents.
BEFOREYOU BEGIN
WARNING: DO
NOT USE NON-RAZOR
PRODUCTS WITHYOUR
RAZOR JR SCOOTER.
Razor Jr scooters have been built to
certain Razor design specifications.
The original equipment supplied at the
time of sale was selected on the basis
of its compatibility with the frame and
all other parts. Certain aftermarket
products may not be compatible and
will void the warranty.
PRODUCT I.D. CODE
1. Underneath Deck
2. UPC Side of Box (not shown)
qRequired Tool
4 mm Allen wrench
with cross-head
(Included)
4 mm Allen wrench
(Included)
Stem
Plastic Cover
Deck
T-bar
Rear Wheel
Rigid Rear Fender
(Not a brake)
Front Wheels

3
Need Help? Visit our web site for replacement parts and product support at www.razor.com or call toll-free at
866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time. Please have the product I.D. code (located on the
bottom of the deck) available for better assistance.
ASSEMBLY INSTRUCTIONS
qHandlebar WARNING: Check hand
grips regularly for wear or damage,
as grips are designed to aid in
gripping handlebars and to provide
some protection against possible
impact. Replace immediately if
worn, torn, damaged or missing.
4 mm Allen wrench
with cross-head
4 mm Allen wrench

4
WARNING: Failure
to properly install and tighten
the pivoting mechanism and the
plastic cover may cause the rider
to lose control and fall. If you do
not understand these instructions,
contact Razor customer care for
assistance.
NOTE: Make sure the Razor logo
is facing outward when inserting
the T-bar.
2
4
1
3
qFront Wheels/T-bar
ASSEMBLY INSTRUCTIONS
4 mm Allen wrench
with cross-head
4 mm Allen wrench
with cross-head

2
2
3
1
4
6
7
8
5
5
SCOOTER PARTS
1. T-bar
2. Handlebar Grips with Handlebar Decoration
3. Stem
4. Plastic Cover
5. Deck
6. Pivoting Mechanism
7. Front Wheels Assembly
8. Rear Wheel Assembly

6
Need Help? Visit our web site for replacement parts and product support at www.razor.com or call toll-free at
866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time. Please have the product I.D. code (located on the
bottom of the deck) available for better assistance.
CHECK BEFORE RIDING
qPivoting Mechanism and Plastic Cover
Check that the pivoting mechanism and the plastic cover are tightened securely.
qWheels
Under normal circumstances and conditions, Razor wheels are maintenance free. Nonetheless, it is the responsibility
of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper tightness, and for
loose parts. When a wheel develops play, this is an indication of excess wear and replacement is necessary. Replace
immediately with only genuine Razor wheels. Worn wheels are considered normal wear-and-tear and are not covered
by the Razor Warranty. Wheels other than genuine Razor wheels may not be compatible with your Razor Jr scooter.
The use of anything other than genuine Razor replacement parts may affect your safety and will void your warranty.
qCleaningYour Scooter
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents, as they may damage the
surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners, as they may damage or dissolve the plastic
components or soften the decals or decal adhesive.
qHow to Ride
Place one foot on the baseboard and push forward with the other foot. Ride with both hands on the handlebars. To turn,
lean slightly in the desired direction. The patented “tilt-to-turn” front wheels and axle will cause the scooter to turn.
Practice turning slowly in an open area free of fixed hazards. Step off to stop.

7
Need Help? Visit our web site for replacement parts and product support at www.razor.com or call toll-free at
866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time. Please have the product I.D. code (located on the
bottom of the deck) available for better assistance.
Razor Limited Warranty
The manufacturer warranties this product to be free of manufacturing defects
for a period of 6 months from date of purchase. This Limited Warranty does
not cover normal wear and tear, or any damage, failure or loss caused by
improper assembly, maintenance, or storage.
This Limited Warranty will be void if the product is ever:
•usedinamannerotherthanforrecreation;
•modiedinanyway;
•rented.
The manufacturer is not liable for incidental or consequential loss or damage
due directly or indirectly to the use of this product.
WARRANTY
Razor does not offer an extended warranty. If you have purchased an extended
warranty, it must be honored by the store at which it was purchased.
For your records, save your original sales receipt with this manual.
US_131220
SAFETY REMINDERS
q q
q
PRE-RIDE CHECKLIST
DO NOT RETURNTO STORE
Failure to follow these instructions may damage
your product and void your warranty.
q
Printed in China for:
Razor USA LLC
Copyright © 2003-2013 Razor USA, LLC. All rights reserved. Razor and the Razor Logo Design
are among the registered trademarks of Razor USA LLC in the United States and/or select
foreign countries. Kix™is a trademark of Razor USA LLC.
Be Careful!
This product is not for aggressive or trick riding. Avoid steep
inclines and don’t ride too fast — you can lose control and
fall. Skateboard parks are not designed for young riders. Never
ride in traffic or on the street and watch your surroundings for
pedestrians, bikers, boarders and skaters.
Maintain a hold on the handlebars at all times.
Loose Parts
Check and secure all fasteners before every ride. Make sure the
pivoting mechanism and the plastic cover are locked properly in
place before riding.
Replacement Parts
Replace worn or broken parts immediately. Visit www.razor.com
or contact Razor customer care for replacement parts.
Safety Gear
Always wear proper protective equipment, such as an approved
safety helmet, elbow pads and kneepads. Always wear closed toe
shoes (lace-up with rubber soles) and keep shoelaces tied and out
of the way of the wheels. Never ride barefooted or in sandals.