re:3D Gigabot User manual

Wheels Assembly Manual
Gigabot 2.0 Wheels

LEGALIZE
Below are a few things our lawyer said we should share to ensure a safe printing
experience:
Read Instructions
All the safety and operating instructions should be read before the printer is operated.
Retain Instructions
The safety and operating instructions should be retained for future reference.
Heed Warnings
All warnings on the product and in the operating instructions should be adhered to.
Follow Instructions
All operating and use instructions should be followed.
Attachments
Do not use attachments or enhancements not recommended by the product
manufacturer as they may cause hazards.

1
1Inventory
2 x
Long Rail (870 mm)
2 x
Short Rail (815 mm)
4 x
Corner Bracket
4 x
Casters
2 x
Left Corner
2 x
Right Corner
28 x
M5 x 8mm Button Head
8 x
M5 x 10mm Button Head
8 x
M5 x 12mm Button Head
36 x
T-Nut

2
2Assembly
2.1 Assembly Brackets and T-nuts
T-nuts (2 pcs)
Corner Bracket
M5 x 10mm (2 pcs)
x 4
x 2
M5 x 8mm (4 pcs)
T-nut (4 pcs)
Left Corner

3
2.2 Add Brackets on Long Rail
Example of Complete Long Rail
x 2
M5 x 8mm (4 pcs)
T-nut (4 pcs)
Right Corner

4
T-nuts (2 pcs)
(used later)
Long Rail
Corner Bracket Assembly
Long Rail
Long Rail

5
M5 x 12mm (2 pcs)
Long Rail
Left Corner Assembly

6
2.3 Repeat on other end of Long Rail
T-nuts (2 pcs)
(used later)
Long Rail
Corner Bracket Assembly
Long Rail

7
M5 x 12mm (2 pcs)
Long Rail
Long Rail
Left Corner Assembly

8
2.4 Add Short Rails
Short Rail
T-nut
(used later)
Short Rail