real living BQ092-1323 User manual

MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
Regularly check hardware and tighten if necessary.
Use dry cloth to wipe surfaces.
Keeping Away from water and fire.
SUGGEST 2 ADULTS TO ASSEMBLE THIS PRODUCT IN AN OPEN AREA.
DO NOT USE POWER TOOLS TO ASSEMBLE
TO PREVENT SERIOUS INJURY OR DEATH, THIS PRODUCT IS EQUIPPED WITH A WALL ANCHORING SYSTEM.
BEFORE THIS PRODUCT CAN BE USED, THE WALL ANCHORING SYSTEM MUST BE INSTALLED AS DIRECTED IN
THE ASSEMBLY INSTRUCTIONS.
Read all instructions before starting
Clear a flat covered space to begin
Two adults are recommended for assembly
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its number in the package
Helpful hints provided along the way

Page 3 of 8
NO QTY DESCRIPTION
A 1pc
B1pc
C1pc
D1pc
E3pcs
F 2pcs
G 1pc
Screw
Bolt
4
58pcs
1pc
Wooden Dowel
314pcs
PARTS LIST
HARDWARE LIST
NO QTYPARTS DESCRIPTION
1 34pcs
28pcs
Top Panel
Left Side Panel
Inner Right Upper Panel
Inner Left Panel
Inner Right Middle Panel
Inner Right Bottom Panel
H 1pc Bottom Panel
Allen Wrench
PVC Sticker
Right Side Panel
A
F
F
G
H
C
B
D
E
E
E
61pc Glue

Page 4 of 8
2
1
3
1
1
3
3
F
D
E
E
1
3
F
E
1x
23x 2
1x
23x 2
1x
23x 2
HELPFUL HINTS
•A Phillips Screwdriver and a flat head screwdriver will be needed for assembly and are not provided.
•Separate parts before starting.
1. Insert Wooden Dowel (1) into the flat Edge
of Inner Right Upper Panel (D).
2. Align the Wooden Dowel (1) in Inner Right
Upper Panel (D) with the holes on Inner Left
Panel (E) and slide into place.
3. Secure the panels together with Screw (3)
using Phillips screwdriver (not provided).
Fully tighten screws.
1. Insert Wooden Dowel (1) into the flat Edge
of Inner Left Panel (E).
2. Align the Wooden Dowel (1) in Inner Left
Panel (E) with the holes on Inner Right Middle
Panel (F) and slide into place.
3. Secure the panels together with Screw (3)
using Phillips screwdriver (not provided).
Fully tighten screws.
1. Insert Wooden Dowel (1) into the flat Edge
of Inner Right Middle Panel (F).
2. Align the Wooden Dowel (1) in Inner Right
Middle Panel (F) with the holes on Inner Left
Panel (E) and slide into place.
3. Secure the panels together with Screw (3)
using Phillips screwdriver (not provided).
Fully tighten screws.

Page 5 of 8
5
4
6
1
3
F
E
1
3
F
E
1
3
G
E
1x
2
3x
2
1x23x2
1x
23x 2
1. Insert Wooden Dowel (1) into the flat Edge
of Inner Left Panel (E).
2. Align the Wooden Dowel (1) in Inner Left
Panel (E) with the holes on Inner Right Middle
Panel (F) and slide into place.
3. Secure the panels together with Screw (3)
using Phillips screwdriver (not provided).
Fully tighten screws.
1. Insert Wooden Dowel (1) into the flat Edge
of Inner Right Middle Panel (F).
2. Align the Wooden Dowel (1) in Inner Right
Middle Panel (F) with the holes on Inner Left
Panel (E) and slide into place.
3. Secure the panels together with Screw (3)
using Phillips screwdriver (not provided).
Fully tighten screws.
1. Insert Wooden Dowel (1) into the flat Edge
of Inner Left Panel (E).
2. Align the Wooden Dowel (1) in Inner Left
Panel (E) with the holes on Inner Right Bottom
Panel (G) and slide into place.
3. Secure the panels together with Screw (3)
using Phillips screwdriver (not provided).
Fully tighten screws.

Page 6 of 8
8
71x
12 6x
1
6x
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6
6
6
6
C
B
B
F
F
G
EE
E
E
E
E
1. Place the Left Side Panel (B) and Right Side Panel (C) on the ground.
2. Place a drop of Glue (6) into the holes on Left Side Panel (B) and Right Side Panel (C).
3. Quickly insert Wooden Dowel (1) into the holes on Left Side Panel (B) and Right
Side Panel (C).
1. Place a drop of Glue (6) into the holes on the edge of Inner Left Panels (E).
2. Align the Wooden Dowel (1) in Left Side Panel (B) with the holes on Inner Left Panels (E) and slide into place.
TIP: Adding the drop of glue into the Inner Left Panels (E) may be easier when using a Q-tip. Place the glue on the Q-tip and
insert it into the hole rotating the Q-tip as it is removed.

Page 7 of 8
10
9
6x
1
6
F
F
G
D
F
F
G
D
C
1. Drop the Glue (6) into the holes on the edge of Inner Right Bottom Panel (G) and Inner Right
Middle Panels (F).
2. Align the Wooden Dowel (1) in Right Side Panel (C) with the holes on Inner Right Bottom Panel (G)
and Inner Right Middle Panels (F) and slide into place.
TIP: Adding the drop of glue into the Inner Right Middle Panels (F) and Inner Right Bottom Panel (G) may be easier when using
a Q-tip. Place the glue on the Q-tip and insert it into the hole rotating the Q-tip as it is removed.
1x 2x
44
4x
1
3x
2
5x
4
1
1
2
2
3
3
5
5
A
B
C
D2
2
4
5
5
1. Insert Wooden Dowel (1) into the Edge of Left Side Panel (B) and Right Side Panel (C).
2. Align the Wooden Dowel (1) in Left Side Panel (B) and Right Side Panel (C) with the holes on Top
Panel (A) and slide into place.
3. Secure the Top Panel (A) to Left Side Panel (B) and Right Side Panel (C) with Bolt (2) using Allen
Wrench (4).
4. Use the PVC Sticker (5) to cover the Bolts as shown in the diagram.
5. Secure the Inner Right Upper Panel (D) to Top Panel (A) with Screw (3) using Phillips screwdriver (not provided).

Page 8 of 8
11 1x
62x 44x 15x 4
2
2
2
2
4
5
5
5
5
B
C
H
G
111
1. Insert Wooden Dowel (1) into the Edge of Left Side Panel (B), Right Side Panel (C) and Inner Right
Bottom Panel (G).
2. Align the Wooden Dowel (1) in Left Side Panel (B), Right Side Panel (C) and Inner Right Bottom Panel (G)
with the holes on Bottom Panel (B) and slide into place.
3. Secure the Bottom Panel (B) to Left Side Panel (B) and Right Side Panel (C) with Bolt (2) using Allen
Wrench (4).
4. Use the PVC Sticker (5) to cover the Bolts as shown in the diagram.
Assembly is now complete.
TIP: When assembly is complete, carefully place the
unit on it's side so it is horizontal as shown. Place some
books or other items evenly along the top as shown.
The distributed weight should not exceed 10 lbs in total
weight. Allow the unit to sit for 8 hours to allow the glue
to fully set.